Hi Laurent :-)
On 04/19/2018 10:20 AM, Laurent Pinchart wrote:
> Hi Philippe,
>
> Thank you for the patch.
>
> On Tuesday, 10 April 2018 08:19:27 EEST Philippe Cornu wrote:
>> Add the 3 optional power supplies using the exact description
>> found in the document named
>> "SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)".
>>
>> Signed-off-by: Philippe Cornu <philippe.co...@st.com>
>> ---
>> drivers/gpu/drm/bridge/sii902x.c | 39 +++++++++++++++++++++++++++++++++----
>> 1 file changed, 35 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/sii902x.c
>> b/drivers/gpu/drm/bridge/sii902x.c index 60373d7eb220..e17ba6db1ec8 100644
>> --- a/drivers/gpu/drm/bridge/sii902x.c
>> +++ b/drivers/gpu/drm/bridge/sii902x.c
>> @@ -24,6 +24,7 @@
>> #include <linux/i2c.h>
>> #include <linux/module.h>
>> #include <linux/regmap.h>
>> +#include <linux/regulator/consumer.h>
>>
>> #include <drm/drmP.h>
>> #include <drm/drm_atomic_helper.h>
>> @@ -86,6 +87,7 @@ struct sii902x {
>> struct drm_bridge bridge;
>> struct drm_connector connector;
>> struct gpio_desc *reset_gpio;
>> + struct regulator_bulk_data supplies[3];
>> };
>>
>> static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
>> @@ -392,23 +394,43 @@ static int sii902x_probe(struct i2c_client *client,
>> return PTR_ERR(sii902x->reset_gpio);
>> }
>>
>> + sii902x->supplies[0].supply = "iovcc";
>> + sii902x->supplies[1].supply = "avcc12";
>> + sii902x->supplies[2].supply = "cvcc12";
>> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(sii902x->supplies),
>> + sii902x->supplies);
>> + if (ret) {
>> + dev_err(dev, "regulator_bulk_get failed\n");
>
> Maybe "failed to get power supplies" to be a bit more explicit ? And while at
> it, printing the value of ret too ?
>
good point, I will do that in v2
>> + return ret;
>> + }
>> +
>> + ret = regulator_bulk_enable(ARRAY_SIZE(sii902x->supplies),
>> + sii902x->supplies);
>> + if (ret) {
>> + dev_err(dev, "regulator_bulk_enable failed\n");
>
> Same here ?
>
agreed
>> + return ret;
>> + }
>> +
>> + usleep_range(10000, 20000);
>> +
>> sii902x_reset(sii902x);
>>
>> ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
>> if (ret)
>> - return ret;
>> + goto err_disable_regulator;
>>
>> ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
>> &chipid, 4);
>> if (ret) {
>> dev_err(dev, "regmap_read failed %d\n", ret);
>> - return ret;
>> + goto err_disable_regulator;
>> }
>>
>> if (chipid[0] != 0xb0) {
>> dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
>> chipid[0]);
>> - return -EINVAL;
>> + ret = -EINVAL;
>> + goto err_disable_regulator;
>> }
>>
>> /* Clear all pending interrupts */
>> @@ -424,7 +446,7 @@ static int sii902x_probe(struct i2c_client *client,
>> IRQF_ONESHOT, dev_name(dev),
>> sii902x);
>> if (ret)
>> - return ret;
>> + goto err_disable_regulator;
>> }
>>
>> sii902x->bridge.funcs = &sii902x_bridge_funcs;
>> @@ -434,6 +456,12 @@ static int sii902x_probe(struct i2c_client *client,
>> i2c_set_clientdata(client, sii902x);
>>
>> return 0;
>> +
>> +err_disable_regulator:
>> + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies),
>> + sii902x->supplies);
>> +
>> + return ret;
>> }
>>
>> static int sii902x_remove(struct i2c_client *client)
>> @@ -443,6 +471,9 @@ static int sii902x_remove(struct i2c_client *client)
>>
>> drm_bridge_remove(&sii902x->bridge);
>>
>> + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies),
>> + sii902x->supplies);
>> +
>
> While this seems functionally correct, would it be useful to only enable power
> supplies when needed to save power ?
>
that is a good point. I do not know well (yet) this bridge. Maybe I can
add a 3rd patch with bridge pre_enable() and post_disable() containing
reset & supplies management. Or I can put reset&supplies in bridge
enable() & disable() but it could be a little messy.
Any opinion/advice?
Many thanks,
Philippe :-)
>> return 0;
>> }
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
