Instead of duplicating whole swaths of atomic helper functions (which
are already out-of-date), just skip the encoder/crtc disables in the
.disable hooks.
Change-Id: I7bd9183ae60624204fb1de9550656b776efc7202
Signed-off-by: Sean Paul <seanp...@chromium.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 8 +
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 8 +
drivers/gpu/drm/msm/msm_atomic.c | 185 +-------------------
3 files changed, 17 insertions(+), 184 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 3cdf1e3d9d96..a3ab6ed2bf1d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -3393,6 +3393,7 @@ static void dpu_crtc_disable(struct drm_crtc *crtc)
{
struct dpu_crtc *dpu_crtc;
struct dpu_crtc_state *cstate;
+ struct drm_display_mode *mode;
struct drm_encoder *encoder;
struct msm_drm_private *priv;
unsigned long flags;
@@ -3407,8 +3408,15 @@ static void dpu_crtc_disable(struct drm_crtc *crtc)
}
dpu_crtc = to_dpu_crtc(crtc);
cstate = to_dpu_crtc_state(crtc->state);
+ mode = &cstate->base.adjusted_mode;
priv = crtc->dev->dev_private;
+ if (msm_is_mode_seamless(mode) || msm_is_mode_seamless_vrr(mode) ||
+ msm_is_mode_seamless_dms(mode)) {
+ DPU_DEBUG("Seamless mode is being applied, skip disable\n");
+ return;
+ }
+
DPU_DEBUG("crtc%d\n", crtc->base.id);
if (dpu_kms_is_suspend_state(crtc->dev))
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 3d168fa09f3f..28ceb589ee40 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2183,6 +2183,7 @@ static void dpu_encoder_virt_disable(struct drm_encoder
*drm_enc)
struct dpu_encoder_virt *dpu_enc = NULL;
struct msm_drm_private *priv;
struct dpu_kms *dpu_kms;
+ struct drm_display_mode *mode;
int i = 0;
if (!drm_enc) {
@@ -2196,6 +2197,13 @@ static void dpu_encoder_virt_disable(struct drm_encoder
*drm_enc)
return;
}
+ mode = &drm_enc->crtc->state->adjusted_mode;
+ if (msm_is_mode_seamless(mode) || msm_is_mode_seamless_vrr(mode) ||
+ msm_is_mode_seamless_dms(mode)) {
+ DPU_DEBUG("Seamless mode is being applied, skip disable\n");
+ return;
+ }
+
dpu_enc = to_dpu_encoder_virt(drm_enc);
DPU_DEBUG_ENC(dpu_enc, "\n");
diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
index 46536edb72ee..5cfb80345052 100644
--- a/drivers/gpu/drm/msm/msm_atomic.c
+++ b/drivers/gpu/drm/msm/msm_atomic.c
@@ -84,189 +84,6 @@ static void msm_atomic_wait_for_commit_done(
}
}
-static void
-msm_disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
-{
- struct drm_connector *connector;
- struct drm_connector_state *old_conn_state, *new_conn_state;
- struct drm_crtc *crtc;
- struct drm_crtc_state *old_crtc_state, *new_crtc_state;
- int i;
-
- for_each_oldnew_connector_in_state(old_state, connector,
old_conn_state, new_conn_state, i) {
- const struct drm_encoder_helper_funcs *funcs;
- struct drm_encoder *encoder;
- struct drm_crtc_state *old_crtc_state;
- unsigned int crtc_idx;
-
- /*
- * Shut down everything that's in the changeset and currently
- * still on. So need to check the old, saved state.
- */
- if (!old_conn_state->crtc)
- continue;
-
- crtc_idx = drm_crtc_index(old_conn_state->crtc);
- old_crtc_state = drm_atomic_get_old_crtc_state(old_state,
- old_conn_state->crtc);
-
- if (!old_crtc_state->active ||
- !drm_atomic_crtc_needs_modeset(old_conn_state->crtc->state))
- continue;
-
- encoder = old_conn_state->best_encoder;
-
- /* We shouldn't get this far if we didn't previously have
- * an encoder.. but WARN_ON() rather than explode.
- */
- if (WARN_ON(!encoder))
- continue;
-
- if (msm_is_mode_seamless(
- &connector->encoder->crtc->state->mode) ||
- msm_is_mode_seamless_vrr(
- &connector->encoder->crtc->state->adjusted_mode))
- continue;
-
- if (msm_is_mode_seamless_dms(
- &connector->encoder->crtc->state->adjusted_mode))
- continue;
-
- funcs = encoder->helper_private;
-
- DRM_DEBUG_ATOMIC("disabling [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
-
- /*
- * Each encoder has at most one connector (since we always steal
- * it away), so we won't call disable hooks twice.
- */
- drm_bridge_disable(encoder->bridge);
-
- /* Right function depends upon target state. */
- if (new_conn_state->crtc && funcs->prepare)
- funcs->prepare(encoder);
- else if (funcs->disable)
- funcs->disable(encoder);
- else
- funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
-
- drm_bridge_post_disable(encoder->bridge);
- }
-
- for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state,
new_crtc_state, i) {
- const struct drm_crtc_helper_funcs *funcs;
-
- /* Shut down everything that needs a full modeset. */
- if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
- continue;
-
- if (!old_crtc_state->active)
- continue;
-
- if (msm_is_mode_seamless(&crtc->state->mode) ||
- msm_is_mode_seamless_vrr(&crtc->state->adjusted_mode))
- continue;
-
- if (msm_is_mode_seamless_dms(&crtc->state->adjusted_mode))
- continue;
-
- funcs = crtc->helper_private;
-
- DRM_DEBUG_ATOMIC("disabling [CRTC:%d]\n",
- crtc->base.id);
-
- /* Right function depends upon target state. */
- if (new_crtc_state->enable && funcs->prepare)
- funcs->prepare(crtc);
- else if (funcs->disable)
- funcs->disable(crtc);
- else
- funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
- }
-}
-
-static void
-msm_crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
-{
- struct drm_crtc *crtc;
- struct drm_crtc_state *new_crtc_state;
- struct drm_connector *connector;
- struct drm_connector_state *new_conn_state;
- int i;
-
- for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
- const struct drm_crtc_helper_funcs *funcs;
-
- if (!new_crtc_state->mode_changed)
- continue;
-
- funcs = crtc->helper_private;
-
- if (new_crtc_state->enable && funcs->mode_set_nofb) {
- DRM_DEBUG_ATOMIC("modeset on [CRTC:%d]\n",
- crtc->base.id);
-
- funcs->mode_set_nofb(crtc);
- }
- }
-
- for_each_new_connector_in_state(old_state, connector, new_conn_state,
i) {
- const struct drm_encoder_helper_funcs *funcs;
- struct drm_crtc_state *new_crtc_state;
- struct drm_encoder *encoder;
- struct drm_display_mode *mode, *adjusted_mode;
-
- if (!new_conn_state->best_encoder)
- continue;
-
- encoder = new_conn_state->best_encoder;
- funcs = encoder->helper_private;
- new_crtc_state = new_conn_state->crtc->state;
- mode = &new_crtc_state->mode;
- adjusted_mode = &new_crtc_state->adjusted_mode;
-
- if (!new_crtc_state->mode_changed)
- continue;
-
- DRM_DEBUG_ATOMIC("modeset on [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
-
- /*
- * Each encoder has at most one connector (since we always steal
- * it away), so we won't call mode_set hooks twice.
- */
- if (funcs->mode_set)
- funcs->mode_set(encoder, mode, adjusted_mode);
-
- drm_bridge_mode_set(encoder->bridge, mode, adjusted_mode);
- }
-}
-
-/**
- * msm_atomic_helper_commit_modeset_disables - modeset commit to disable
outputs
- * @dev: DRM device
- * @old_state: atomic state object with old state structures
- *
- * This function shuts down all the outputs that need to be shut down and
- * prepares them (if required) with the new mode.
- *
- * For compatibility with legacy crtc helpers this should be called before
- * drm_atomic_helper_commit_planes(), which is what the default commit function
- * does. But drivers with different needs can group the modeset commits
together
- * and do the plane commits at the end. This is useful for drivers doing
runtime
- * PM since planes updates then only happen when the CRTC is actually enabled.
- */
-void msm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
- struct drm_atomic_state *old_state)
-{
- msm_disable_outputs(dev, old_state);
-
- drm_atomic_helper_update_legacy_modeset_state(dev, old_state);
-
- msm_crtc_set_mode(dev, old_state);
-}
-
/**
* msm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs
* @dev: DRM device
@@ -406,7 +223,7 @@ static void complete_commit(struct msm_commit *c)
kms->funcs->prepare_commit(kms, state);
- msm_atomic_helper_commit_modeset_disables(dev, state);
+ drm_atomic_helper_commit_modeset_disables(dev, state);
drm_atomic_helper_commit_planes(dev, state, 0);
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
