On Mon, 29 Jan 2018 13:56:21 +0200
Tomi Valkeinen <tomi.valkei...@ti.com> wrote:
> > +static ssize_t cdns_dsi_transfer(struct mipi_dsi_host *host,
> > + const struct mipi_dsi_msg *msg)
> > +{
> > + struct cdns_dsi *dsi = to_cdns_dsi(host);
> > + u32 cmd, sts, val, wait = WRITE_COMPLETED, ctl = 0;
> > + struct mipi_dsi_packet packet;
> > + int ret, i, tx_len, rx_len;
> > +
> > + ret = pm_runtime_get_sync(host->dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + cdns_dsi_init_link(dsi);
> > +
> > + ret = mipi_dsi_create_packet(&packet, msg);
> > + if (ret)
> > + goto out;
> > +
> > + tx_len = msg->tx_buf ? msg->tx_len : 0;
> > + rx_len = msg->rx_buf ? msg->rx_len : 0;
> > +
> > + /* For read operations, the maximum TX len is 2. */
> > + if (rx_len && tx_len > 2) {
> > + ret = -ENOTSUPP;
> > + goto out;
> > + }
> > +
> > + /* TX len is limited by the CMD FIFO depth. */
> > + if (tx_len > dsi->direct_cmd_fifo_depth) {
> > + ret = -ENOTSUPP;
> > + goto out;
> > + }
> > +
> > + /* RX len is limited by the RX FIFO depth. */
> > + if (rx_len > dsi->rx_fifo_depth) {
> > + ret = -ENOTSUPP;
> > + goto out;
> > + }
> > +
> > + cmd = CMD_SIZE(tx_len) | CMD_VCHAN_ID(msg->channel) |
> > + CMD_DATATYPE(msg->type);
> > +
> > + if (msg->flags & MIPI_DSI_MSG_USE_LPM)
> > + cmd |= CMD_LP_EN;
> > +
> > + if (mipi_dsi_packet_format_is_long(msg->type))
> > + cmd |= CMD_LONG;
> > +
> > + if (rx_len) {
> > + cmd |= READ_CMD;
> > + wait = READ_COMPLETED_WITH_ERR | READ_COMPLETED;
> > + ctl = READ_EN | BTA_EN;
> > + } else if (msg->flags & MIPI_DSI_MSG_REQ_ACK) {
> > + cmd |= BTA_REQ;
> > + wait = ACK_WITH_ERR_RCVD | ACK_RCVD;
> > + ctl = BTA_EN;
> > + }
> > +
> > + writel(readl(dsi->regs + MCTL_MAIN_DATA_CTL) | ctl,
> > + dsi->regs + MCTL_MAIN_DATA_CTL);
> > +
> > + writel(cmd, dsi->regs + DIRECT_CMD_MAIN_SETTINGS);
> > +
> > + for (i = 0; i < tx_len; i += 4) {
> > + const u8 *buf = msg->tx_buf;
> > + int j;
> > +
> > + val = 0;
> > + for (j = 0; j < 4 && j + i < tx_len; j++)
> > + val |= (u32)buf[i + j] << (8 * j);
> > +
> > + writel(val, dsi->regs + DIRECT_CMD_WRDATA);
> > + }
> > +
> > + /* Clear status flags before sending the command. */
> > + writel(wait, dsi->regs + DIRECT_CMD_STS_CLR);
> > + writel(wait, dsi->regs + DIRECT_CMD_STS_CTL);
> > + reinit_completion(&dsi->direct_cmd_comp);
> > + writel(0, dsi->regs + DIRECT_CMD_SEND);
> > +
> > + wait_for_completion_timeout(&dsi->direct_cmd_comp,
> > + msecs_to_jiffies(1000));
> > +
> > + sts = readl(dsi->regs + DIRECT_CMD_STS);
> > + writel(wait, dsi->regs + DIRECT_CMD_STS_CLR);
> > + writel(0, dsi->regs + DIRECT_CMD_STS_CTL);
> > +
> > + writel(readl(dsi->regs + MCTL_MAIN_DATA_CTL) & ~ctl,
> > + dsi->regs + MCTL_MAIN_DATA_CTL);
> > +
> > + /* We did not receive the events we were waiting for. */
> > + if (!(sts & wait)) {
> > + ret = -ETIMEDOUT;
> > + goto out;
> > + }
> > +
> > + /* READ of WRITE with ACK failed. */
>
> Should that 'of' be 'or'?
>
Yep, I'll fix that too.
Other than those trivial changes, are you happy with the rest of the
driver or should I wait a bit for a full review?
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
