Move writes of LCD_SPU_SRAM_PARA1 under the irq lock, so that we can
add this to the frame updates at interrupt time when disabling a
plane.

Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
 drivers/gpu/drm/armada/armada_crtc.c    | 10 ++++++----
 drivers/gpu/drm/armada/armada_overlay.c |  5 +++--
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/armada/armada_crtc.c 
b/drivers/gpu/drm/armada/armada_crtc.c
index 02eefdc6f062..b0091142a79f 100644
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -657,8 +657,6 @@ static int armada_drm_crtc_mode_set(struct drm_crtc *crtc,
        /* Now compute the divider for real */
        dcrtc->variant->compute_clock(dcrtc, adj, &sclk);
 
-       /* Ensure graphic fifo is enabled */
-       armada_reg_queue_mod(regs, i, 0, CFG_PDWN64x66, LCD_SPU_SRAM_PARA1);
        armada_reg_queue_set(regs, i, sclk, LCD_CFG_SCLK_DIV);
 
        if (interlaced ^ dcrtc->interlaced) {
@@ -671,6 +669,9 @@ static int armada_drm_crtc_mode_set(struct drm_crtc *crtc,
 
        spin_lock_irqsave(&dcrtc->irq_lock, flags);
 
+       /* Ensure graphic fifo is enabled */
+       armada_reg_queue_mod(regs, i, 0, CFG_PDWN64x66, LCD_SPU_SRAM_PARA1);
+
        /* Even interlaced/progressive frame */
        dcrtc->v[1].spu_v_h_total = adj->crtc_vtotal << 16 |
                                    adj->crtc_htotal;
@@ -869,9 +870,11 @@ static int armada_drm_crtc_cursor_update(struct 
armada_crtc *dcrtc, bool reload)
                return 0;
        }
 
+       spin_lock_irq(&dcrtc->irq_lock);
        para1 = readl_relaxed(dcrtc->base + LCD_SPU_SRAM_PARA1);
        armada_updatel(CFG_CSB_256x32, CFG_CSB_256x32 | CFG_PDWN256x32,
                       dcrtc->base + LCD_SPU_SRAM_PARA1);
+       spin_unlock_irq(&dcrtc->irq_lock);
 
        /*
         * Initialize the transparency if the SRAM was powered down.
@@ -1157,9 +1160,8 @@ int armada_drm_plane_disable(struct drm_plane *plane,
 
        spin_lock_irq(&dcrtc->irq_lock);
        armada_updatel(0, enable_mask, dcrtc->base + LCD_SPU_DMA_CTRL0);
-       spin_unlock_irq(&dcrtc->irq_lock);
-
        armada_updatel(sram_para1, 0, dcrtc->base + LCD_SPU_SRAM_PARA1);
+       spin_unlock_irq(&dcrtc->irq_lock);
 
        return 0;
 }
diff --git a/drivers/gpu/drm/armada/armada_overlay.c 
b/drivers/gpu/drm/armada/armada_overlay.c
index 200223861bfb..e02d0d9d4c23 100644
--- a/drivers/gpu/drm/armada/armada_overlay.c
+++ b/drivers/gpu/drm/armada/armada_overlay.c
@@ -162,8 +162,9 @@ armada_ovl_plane_update(struct drm_plane *plane, struct 
drm_crtc *crtc,
                return 0;
        } else if (~dplane->base.state.ctrl0 & ctrl0 & CFG_DMA_ENA) {
                /* Power up the Y/U/V FIFOs on ENA 0->1 transitions */
-               armada_updatel(0, CFG_PDWN16x66 | CFG_PDWN32x66,
-                              dcrtc->base + LCD_SPU_SRAM_PARA1);
+               armada_reg_queue_mod(work->regs, idx,
+                                    0, CFG_PDWN16x66 | CFG_PDWN32x66,
+                                    LCD_SPU_SRAM_PARA1);
        }
 
        if (armada_drm_plane_work_wait(&dplane->base, HZ / 25) == 0)
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to