On Sat, Nov 25, 2017 at 06:33:39PM +0100, Hans de Goede wrote:
> Ideally we could use the VBT for this, that would be simple, in
> intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
> connector->display_info.panel_orientation accordingly and call
> drm_connector_init_panel_orientation_property(), done.
>
> Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
> with an upside down LCD and where the GOP is properly rotating the
> EFI fb in hardware.
>
> So instead we end up reading the rotation from the primary plane.
>
> This commit only implements the panel orientation property for DSI
> panels on BYT / CHT hardware, as all known non normal oriented panels
> sofar are only found on this hardware.
>
> Changes in v2:
> -Read back the rotation applied by the GOP from the primary plane
> instead of relying on dev_priv->vbt.dsi.config->rotation, because it
> seems that the VBT rotation filed is always 0 even on devices where the
> GOP does apply a rotation
>
> Changes in v3:
> -Rewrite the code to read back the orientation from the primary
> plane to contain all of this in intel_dsi.c instead of poking a bunch
> of holes between all the different layers
>
> Changes in v6:
> -Move hardware readout to intel_dsi_init()
Yeah, this is what I had in mind. A small hack, but much more well
contained.
Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
>
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> ---
> drivers/gpu/drm/i915/intel_dsi.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index f09474b0c4d3..f67d321376e4 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -1666,6 +1666,27 @@ static const struct drm_connector_funcs
> intel_dsi_connector_funcs = {
> .atomic_duplicate_state = intel_digital_connector_duplicate_state,
> };
>
> +static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
> +{
> + struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> + int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> + enum i9xx_plane_id plane;
> + u32 val;
> +
> + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> + if (connector->encoder->crtc_mask == BIT(PIPE_B))
> + plane = PLANE_B;
> + else
> + plane = PLANE_A;
> +
> + val = I915_READ(DSPCNTR(plane));
> + if (val & DISPPLANE_ROTATE_180)
> + orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> + }
> +
> + return orientation;
> +}
> +
> static void intel_dsi_add_properties(struct intel_connector *connector)
> {
> struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> @@ -1681,6 +1702,13 @@ static void intel_dsi_add_properties(struct
> intel_connector *connector)
>
> allowed_scalers);
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
> +
> + connector->base.display_info.panel_orientation =
> + intel_dsi_get_panel_orientation(connector);
> + drm_connector_init_panel_orientation_property(
> + &connector->base,
> + connector->panel.fixed_mode->hdisplay,
> + connector->panel.fixed_mode->vdisplay);
> }
> }
>
> --
> 2.14.3
>
> _______________________________________________
> Intel-gfx mailing list
> intel-...@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
