From: Hans Verkuil <hans.verk...@cisco.com>
Implement support for this DisplayPort feature.
The cec device is created whenever it detects an adapter that
has this feature. It is only removed when a new adapter is connected
that does not support this. If a new adapter is connected that has
different properties than the previous one, then the old cec device is
unregistered and a new one is registered to replace the old one.
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
Changes since v4:
Reworked the last patch (adding CEC to i915) based on Ville's comments
and my MST testing:
- register/unregister CEC in intel_dp_connector_register/unregister
- add comment and check if connector is registered in long_pulse
- unregister CEC if an MST 'connector' is detected.
---
drivers/gpu/drm/i915/intel_dp.c | 47 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 09f274419eea..853346e8c5e9 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -32,6 +32,7 @@
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <asm/byteorder.h>
+#include <media/cec.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
@@ -4690,6 +4691,7 @@ intel_dp_set_edid(struct intel_dp *intel_dp)
intel_connector->detect_edid = edid;
intel_dp->has_audio = drm_detect_monitor_audio(edid);
+ cec_s_phys_addr_from_edid(intel_dp->aux.cec_adap, edid);
}
static void
@@ -4699,6 +4701,7 @@ intel_dp_unset_edid(struct intel_dp *intel_dp)
kfree(intel_connector->detect_edid);
intel_connector->detect_edid = NULL;
+ cec_phys_addr_invalidate(intel_dp->aux.cec_adap);
intel_dp->has_audio = false;
}
@@ -4773,6 +4776,14 @@ intel_dp_long_pulse(struct intel_connector
*intel_connector)
* with EDID on it
*/
status = connector_status_disconnected;
+ if (connector->registered) {
+ /*
+ * CEC is not supported for an MST device, unregister
+ * the existing CEC adapter, if any.
+ */
+ cec_unregister_adapter(intel_dp->aux.cec_adap);
+ intel_dp->aux.cec_adap = NULL;
+ }
goto out;
} else {
/*
@@ -4822,6 +4833,25 @@ intel_dp_long_pulse(struct intel_connector
*intel_connector)
if (status != connector_status_connected && !intel_dp->is_mst)
intel_dp_unset_edid(intel_dp);
+ if (status == connector_status_connected && connector->registered) {
+ /*
+ * A new DP-to-HDMI adapter could have been plugged in, so
+ * call drm_dp_cec_configure_adapter to check if a CEC device
+ * should be unregistered and/or registered, depending on the
+ * CEC capabilities of the adapter.
+ *
+ * The CEC device is associated with the connector, so it
+ * sticks around when the adapter is unplugged and is only
+ * unregistered if the connector is unregistered or if another
+ * adapter is plugged in with no or different CEC capabilities.
+ *
+ * This is what CEC applications expect.
+ */
+ drm_dp_cec_configure_adapter(&intel_dp->aux,
+ connector->name, dev->dev,
+ intel_connector->detect_edid);
+ }
+
intel_display_power_put(to_i915(dev), intel_dp->aux_power_domain);
return status;
}
@@ -4902,6 +4932,7 @@ static int
intel_dp_connector_register(struct drm_connector *connector)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct drm_device *dev = connector->dev;
int ret;
ret = intel_connector_register(connector);
@@ -4913,6 +4944,15 @@ intel_dp_connector_register(struct drm_connector
*connector)
DRM_DEBUG_KMS("registering %s bus for %s\n",
intel_dp->aux.name, connector->kdev->kobj.name);
+ if (connector->status == connector_status_connected &&
+ !intel_dp->is_mst && !intel_dp->aux.cec_adap) {
+ struct intel_connector *intel_connector =
+ intel_dp->attached_connector;
+
+ drm_dp_cec_configure_adapter(&intel_dp->aux,
+ connector->name, dev->dev,
+ intel_connector->detect_edid);
+ }
intel_dp->aux.dev = connector->kdev;
return drm_dp_aux_register(&intel_dp->aux);
}
@@ -4920,7 +4960,11 @@ intel_dp_connector_register(struct drm_connector
*connector)
static void
intel_dp_connector_unregister(struct drm_connector *connector)
{
- drm_dp_aux_unregister(&intel_attached_dp(connector)->aux);
+ struct intel_dp *intel_dp = intel_attached_dp(connector);
+
+ cec_unregister_adapter(intel_dp->aux.cec_adap);
+ intel_dp->aux.cec_adap = NULL;
+ drm_dp_aux_unregister(&intel_dp->aux);
intel_connector_unregister(connector);
}
@@ -5129,6 +5173,7 @@ intel_dp_hpd_pulse(struct intel_digital_port
*intel_dig_port, bool long_hpd)
}
if (!intel_dp->is_mst) {
+ drm_dp_cec_irq(&intel_dp->aux);
if (!intel_dp_short_pulse(intel_dp)) {
intel_dp->detect_done = false;
goto put_power;
--
2.14.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
