On Thu, Nov 16, 2017 at 08:06:18PM +0530, Sharma, Shashank wrote:
> Regards
>
> Shashank
>
>
> On 11/13/2017 10:34 PM, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > HDMI 2.0 Appendix F suggest that we should keep sending the infoframe
> > when switching from 3D to 2D mode, even if the infoframe isn't strictly
> > necessary (ie. not needed to transmit the VIC or stereo information).
> > This is a workaround against some sinks that fail to realize that they
> > should switch from 3D to 2D mode when the source stop transmitting
> > the infoframe.
> >
> > v2: Handle unpack() as well
> > Pull the length calculation into a helper
> >
> > Cc: Shashank Sharma <shashank.sha...@intel.com>
> > Cc: Andrzej Hajda <a.ha...@samsung.com>
> > Cc: Thierry Reding <thierry.red...@gmail.com>
> > Cc: Hans Verkuil <hans.verk...@cisco.com>
> > Cc: linux-me...@vger.kernel.org
> > Reviewed-by: Andrzej Hajda <a.ha...@samsung.com> #v1
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> > drivers/video/hdmi.c | 51
> > +++++++++++++++++++++++++++++++--------------------
> > 1 file changed, 31 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> > index 1cf907ecded4..111a0ab6280a 100644
> > --- a/drivers/video/hdmi.c
> > +++ b/drivers/video/hdmi.c
> > @@ -321,6 +321,17 @@ int hdmi_vendor_infoframe_init(struct
> > hdmi_vendor_infoframe *frame)
> > }
> > EXPORT_SYMBOL(hdmi_vendor_infoframe_init);
> >
> > +static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe
> > *frame)
> > +{
> > + /* for side by side (half) we also need to provide 3D_Ext_Data */
> > + if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
> > + return 6;
> > + else if (frame->vic != 0 || frame->s3d_struct !=
> > HDMI_3D_STRUCTURE_INVALID)
> > + return 5;
> > + else
> > + return 4;
> > +}
> > +
> > /**
> > * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary
> > buffer
> > * @frame: HDMI infoframe
> > @@ -341,19 +352,11 @@ ssize_t hdmi_vendor_infoframe_pack(struct
> > hdmi_vendor_infoframe *frame,
> > u8 *ptr = buffer;
> > size_t length;
> >
> > - /* empty info frame */
> > - if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID)
> > - return -EINVAL;
> > -
> > /* only one of those can be supplied */
> > if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
> > return -EINVAL;
> >
> > - /* for side by side (half) we also need to provide 3D_Ext_Data */
> > - if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
> > - frame->length = 6;
> > - else
> > - frame->length = 5;
> > + frame->length = hdmi_vendor_infoframe_length(frame);
> >
> > length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> >
> > @@ -372,14 +375,16 @@ ssize_t hdmi_vendor_infoframe_pack(struct
> > hdmi_vendor_infoframe *frame,
> > ptr[5] = 0x0c;
> > ptr[6] = 0x00;
> >
> > - if (frame->vic) {
> > - ptr[7] = 0x1 << 5; /* video format */
> > - ptr[8] = frame->vic;
> > - } else {
> > + if (frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) {
> > ptr[7] = 0x2 << 5; /* video format */
> > ptr[8] = (frame->s3d_struct & 0xf) << 4;
> > if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
> > ptr[9] = (frame->s3d_ext_data & 0xf) << 4;
> > + } else if (frame->vic) {
> Please correct me if I dint understand this properly, but for a HDMI 2.0
> sink + 3D transmission, wouldn't I be sending
> HDMI 2.0 VIC = 94 as well as some valid s3d flag (like side by side) ?
That vic will be in the AVI infoframe. Here we're concerned about the
VIC in the HDMI vendor infoframe.
>
> - Shashank
> > + ptr[7] = 0x1 << 5; /* video format */
> > + ptr[8] = frame->vic;
> > + } else {
> > + ptr[7] = 0x0 << 5; /* video format */
> > }
> >
> > hdmi_infoframe_set_checksum(buffer, length);
> > @@ -1165,7 +1170,7 @@ hdmi_vendor_any_infoframe_unpack(union
> > hdmi_vendor_any_infoframe *frame,
> >
> > if (ptr[0] != HDMI_INFOFRAME_TYPE_VENDOR ||
> > ptr[1] != 1 ||
> > - (ptr[2] != 5 && ptr[2] != 6))
> > + (ptr[2] != 4 && ptr[2] != 5 && ptr[2] != 6))
> > return -EINVAL;
> >
> > length = ptr[2];
> > @@ -1193,16 +1198,22 @@ hdmi_vendor_any_infoframe_unpack(union
> > hdmi_vendor_any_infoframe *frame,
> >
> > hvf->length = length;
> >
> > - if (hdmi_video_format == 0x1) {
> > - hvf->vic = ptr[4];
> > - } else if (hdmi_video_format == 0x2) {
> > + if (hdmi_video_format == 0x2) {
> > + if (length != 5 && length != 6)
> > + return -EINVAL;
> > hvf->s3d_struct = ptr[4] >> 4;
> > if (hvf->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) {
> > - if (length == 6)
> > - hvf->s3d_ext_data = ptr[5] >> 4;
> > - else
> > + if (length != 6)
> > return -EINVAL;
> > + hvf->s3d_ext_data = ptr[5] >> 4;
> > }
> > + } else if (hdmi_video_format == 0x1) {
> > + if (length != 5)
> > + return -EINVAL;
> > + hvf->vic = ptr[4];
> > + } else {
> > + if (length != 4)
> > + return -EINVAL;
> > }
> >
> > return 0;
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
