Op 27-09-17 om 14:53 schreef Dmitry Osipenko:
> On 27.09.2017 11:35, Maarten Lankhorst wrote:
>> Commit 669c9215afea ("drm/atomic: Make async plane update checks work as
>> intended, v2.") assumed incorrectly that if only 1 plane is matched in
>> the loop, the variables will be set to that plane. In reality we reset
>> them to NULL every time a new plane was iterated. This behavior is
>> surprising, so fix this by making the for loops only assign the
>> variables on a match.
>>
>> Cc: Dmitry Osipenko <dig...@gmail.com>
>> Fixes: 669c9215afea ("drm/atomic: Make async plane update checks work as
>> intended, v2.")
>> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
>> ---
>> include/drm/drm_atomic.h | 85
>> ++++++++++++++++++++++++------------------------
>> 1 file changed, 42 insertions(+), 43 deletions(-)
>>
>> diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
>> index 6fae95f28e10..5afd6e364fb6 100644
>> --- a/include/drm/drm_atomic.h
>> +++ b/include/drm/drm_atomic.h
>> @@ -585,12 +585,12 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_oldnew_connector_in_state(__state, connector,
>> old_connector_state, new_connector_state, __i) \
>> for ((__i) = 0;
>> \
>> - (__i) < (__state)->num_connector &&
>> \
>> - ((connector) = (__state)->connectors[__i].ptr,
>> \
>> - (old_connector_state) = (__state)->connectors[__i].old_state,
>> \
>> - (new_connector_state) = (__state)->connectors[__i].new_state, 1);
>> \
>> - (__i)++) \
>> - for_each_if (connector)
>> + (__i) < (__state)->num_connector;
>> \
>> + (__i)++)
>> \
>> + for_each_if ((__state)->connectors[__i].ptr &&
>> \
>> + ((connector) = (__state)->connectors[__i].ptr,
>> \
>> + (old_connector_state) =
>> (__state)->connectors[__i].old_state, \
>> + (new_connector_state) =
>> (__state)->connectors[__i].new_state, 1))
>>
>> /**
>> * for_each_old_connector_in_state - iterate over all connectors in an
>> atomic update
>> @@ -606,11 +606,11 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_old_connector_in_state(__state, connector,
>> old_connector_state, __i) \
>> for ((__i) = 0;
>> \
>> - (__i) < (__state)->num_connector &&
>> \
>> - ((connector) = (__state)->connectors[__i].ptr,
>> \
>> - (old_connector_state) = (__state)->connectors[__i].old_state, 1);
>> \
>> - (__i)++) \
>> - for_each_if (connector)
>> + (__i) < (__state)->num_connector;
>> \
>> + (__i)++)
>> \
>> + for_each_if ((__state)->connectors[__i].ptr &&
>> \
>> + ((connector) = (__state)->connectors[__i].ptr,
>> \
>> + (old_connector_state) =
>> (__state)->connectors[__i].old_state, 1))
>>
>> /**
>> * for_each_new_connector_in_state - iterate over all connectors in an
>> atomic update
>> @@ -626,11 +626,11 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_new_connector_in_state(__state, connector,
>> new_connector_state, __i) \
>> for ((__i) = 0;
>> \
>> - (__i) < (__state)->num_connector &&
>> \
>> - ((connector) = (__state)->connectors[__i].ptr,
>> \
>> - (new_connector_state) = (__state)->connectors[__i].new_state, 1);
>> \
>> - (__i)++) \
>> - for_each_if (connector)
>> + (__i) < (__state)->num_connector;
>> \
>> + (__i)++)
>> \
>> + for_each_if ((__state)->connectors[__i].ptr &&
>> \
>> + ((connector) = (__state)->connectors[__i].ptr,
>> \
>> + (new_connector_state) =
>> (__state)->connectors[__i].new_state, 1))
>>
>> /**
>> * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic
>> update
>> @@ -646,12 +646,12 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_oldnew_crtc_in_state(__state, crtc, old_crtc_state,
>> new_crtc_state, __i) \
>> for ((__i) = 0; \
>> - (__i) < (__state)->dev->mode_config.num_crtc && \
>> - ((crtc) = (__state)->crtcs[__i].ptr, \
>> - (old_crtc_state) = (__state)->crtcs[__i].old_state, \
>> - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \
>> + (__i) < (__state)->dev->mode_config.num_crtc; \
>> (__i)++) \
>> - for_each_if (crtc)
>> + for_each_if ((__state)->crtcs[__i].ptr && \
>> + ((crtc) = (__state)->crtcs[__i].ptr, \
>> + (old_crtc_state) =
>> (__state)->crtcs[__i].old_state, \
>> + (new_crtc_state) =
>> (__state)->crtcs[__i].new_state, 1))
>>
>> /**
>> * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update
>> @@ -666,11 +666,11 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_old_crtc_in_state(__state, crtc, old_crtc_state, __i)
>> \
>> for ((__i) = 0; \
>> - (__i) < (__state)->dev->mode_config.num_crtc && \
>> - ((crtc) = (__state)->crtcs[__i].ptr, \
>> - (old_crtc_state) = (__state)->crtcs[__i].old_state, 1); \
>> + (__i) < (__state)->dev->mode_config.num_crtc; \
>> (__i)++) \
>> - for_each_if (crtc)
>> + for_each_if ((__state)->crtcs[__i].ptr && \
>> + ((crtc) = (__state)->crtcs[__i].ptr, \
>> + (old_crtc_state) =
>> (__state)->crtcs[__i].old_state, 1))
>>
>> /**
>> * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update
>> @@ -685,11 +685,11 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_new_crtc_in_state(__state, crtc, new_crtc_state, __i)
>> \
>> for ((__i) = 0; \
>> - (__i) < (__state)->dev->mode_config.num_crtc && \
>> - ((crtc) = (__state)->crtcs[__i].ptr, \
>> - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1); \
>> + (__i) < (__state)->dev->mode_config.num_crtc; \
>> (__i)++) \
>> - for_each_if (crtc)
>> + for_each_if ((__state)->crtcs[__i].ptr && \
>> + ((crtc) = (__state)->crtcs[__i].ptr, \
>> + (new_crtc_state) =
>> (__state)->crtcs[__i].new_state, 1))
>>
>> /**
>> * for_each_oldnew_plane_in_state - iterate over all planes in an atomic
>> update
>> @@ -705,12 +705,12 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_oldnew_plane_in_state(__state, plane, old_plane_state,
>> new_plane_state, __i) \
>> for ((__i) = 0; \
>> - (__i) < (__state)->dev->mode_config.num_total_plane && \
>> - ((plane) = (__state)->planes[__i].ptr, \
>> - (old_plane_state) = (__state)->planes[__i].old_state, \
>> - (new_plane_state) = (__state)->planes[__i].new_state, 1); \
>> + (__i) < (__state)->dev->mode_config.num_total_plane; \
>> (__i)++) \
>> - for_each_if (plane)
>> + for_each_if ((__state)->planes[__i].ptr && \
>> + ((plane) = (__state)->planes[__i].ptr, \
>> + (old_plane_state) =
>> (__state)->planes[__i].old_state,\
>> + (new_plane_state) =
>> (__state)->planes[__i].new_state, 1))
>>
>> /**
>> * for_each_old_plane_in_state - iterate over all planes in an atomic update
>> @@ -725,12 +725,11 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_old_plane_in_state(__state, plane, old_plane_state, __i) \
>> for ((__i) = 0; \
>> - (__i) < (__state)->dev->mode_config.num_total_plane && \
>> - ((plane) = (__state)->planes[__i].ptr, \
>> - (old_plane_state) = (__state)->planes[__i].old_state, 1); \
>> + (__i) < (__state)->dev->mode_config.num_total_plane; \
>> (__i)++) \
>> - for_each_if (plane)
>> -
>> + for_each_if ((__state)->planes[__i].ptr && \
>> + ((plane) = (__state)->planes[__i].ptr, \
>> + (old_plane_state) =
>> (__state)->planes[__i].old_state, 1))
>> /**
>> * for_each_new_plane_in_state - iterate over all planes in an atomic update
>> * @__state: &struct drm_atomic_state pointer
>> @@ -744,11 +743,11 @@ void drm_state_dump(struct drm_device *dev, struct
>> drm_printer *p);
>> */
>> #define for_each_new_plane_in_state(__state, plane, new_plane_state, __i) \
>> for ((__i) = 0; \
>> - (__i) < (__state)->dev->mode_config.num_total_plane && \
>> - ((plane) = (__state)->planes[__i].ptr, \
>> - (new_plane_state) = (__state)->planes[__i].new_state, 1); \
>> + (__i) < (__state)->dev->mode_config.num_total_plane; \
>> (__i)++) \
>> - for_each_if (plane)
>> + for_each_if ((__state)->planes[__i].ptr && \
>> + ((plane) = (__state)->planes[__i].ptr, \
>> + (new_plane_state) =
>> (__state)->planes[__i].new_state, 1))
>>
>> /**
>> * for_each_oldnew_private_obj_in_state - iterate over all private objects
>> in an atomic update
>>
> This variant also works.
>
> Tested-by: Dmitry Osipenko <dig...@gmail.com>
>
Forgot to hit push, pushed now. :)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
