Dear Thierry,
Could you please check these patches.
Best regards,
Hoegeun
On 07/13/2017 11:20 AM, Hoegeun Kwon wrote:
Hi Andrzej,
Thank you for your review.
The purpose of this patch is add support for s6e63j0x03 AMOLED panel
on the rinato board(Samsung Galaxy Gear 2).
Changes for V4:
- Added Reviewed-by: Andrzej Hajda <a.ha...@samsung.com> (2/3 patch).
- Fixed the style of macro function.
Changes for V3:
- Applied patch 'ARM: dts: exynos: Fix the active of reset gpios from rinato
dts' (v2 3/4)
- Remove the unnecessary define ('MIN_BRIGHTNESS')
- Removed explicit casting.
- Removed violation of kernel coding style.
Changes for V2:
- Added the interface info in binding document.
- Added Reviewed-by: Andrzej Hajda <a.ha...@samsung.com> (1/3 patch).
- Added Acked-by: Rob Herring <r...@kernel.org> (1/3 patch).
- Fixed the tristate of config from video mode to command mode.
- Fixed the reset gpios from active high to low from rinato dts.
- Fixed a lot of things in panel driver, reflect Andrzej's review.
Best regards,
Hoegeun
Hoegeun Kwon (3):
dt-bindings: Add support for samsung s6e63j0x03 panel binding
drm/panel: Add support for s6e63j0x03 panel driver
ARM: dts: exynos: Remove the display-timing and delay from rinato dts
.../bindings/display/panel/samsung,s6e63j0x03.txt | 24 +
arch/arm/boot/dts/exynos3250-rinato.dts | 22 -
drivers/gpu/drm/panel/Kconfig | 7 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 532 +++++++++++++++++++++
5 files changed, 564 insertions(+), 22 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
