On 2017-06-15 13:54, Boris Brezillon wrote:
> On Thu, 15 Jun 2017 13:47:35 +0200
> Peter Rosin <p...@axentia.se> wrote:
>
>> On 2017-06-15 12:15, Boris Brezillon wrote:
>>> On Thu, 15 Jun 2017 11:54:29 +0200
>>> Peter Rosin <p...@axentia.se> wrote:
>>>
>>>> On 2017-06-13 17:30, Boris Brezillon wrote:
>>>>> Hi Peter,
>>>>>
>>>>> On Tue, 13 Jun 2017 16:34:25 +0200
>>>>> Peter Rosin <p...@axentia.se> wrote:
>>>>>
>>>>>> Hi!
>>>>>>
>>>>>> I need color lookup support for the atmel-hlcdc driver, and had a peek
>>>>>> at the code. I also looked at the drivers/gpu/drm/stm driver and came
>>>>>> up with the below diff. It compiles, but I have not booted it for the
>>>>>> simple reason that I can't imagine it will work.
>>>>>>
>>>>>> Sure, the code fills the clut registers in the .load_lut helper function
>>>>>> and I think it might even do the right thing when setting up the mode.
>>>>>> I'm less sure DMA will work correctly? It might, but I haven't looked at
>>>>>> it for many seconds...
>>>>>>
>>>>>> The big question is how the color info gets into the new clut array
>>>>>> I created in atmel_hlcdc_crtc? When I look at the stm driver, which does
>>>>>> it just like this AFAICT I just don't see it. So, what I'm I missing?
>>>>>
>>>>> You should look at drm_atomic_helper_legacy_gamma_set() and its users.
>>>>
>>>> Ok, thanks. I had a long look and could not get it to work at all.
>>>
>>> Probably because you're trying to set this up through the emulated
>>> fbdev interface. The solution I proposed is supposed to be accessed
>>> through DRM ioctls.
>>
>> Yes, that seems like the root cause of most of my troubles. But, the apps
>> I have seem to use the fbdev interface, and if the emulation is poorly
>> done, they won't work right...
>>
>>>> So,
>>>> I did as below instead. However, there are a few glaring problems...
>>>
>>> Well, I doubt this will be accepted. The fbdev emulation layer is
>>> supposed to be rather dumb, partly because DRM people want developers
>>> to switch to the DRM interface.
>>
>> Sigh.
>>
>>> Also note that I won't accept a solution that supports setting the LUT
>>> table only through the fbdev interface, so please try to make it work
>>> the DRM way before you even consider modifying the fbdev emulation
>>> layer.
>>
>> Ok, I'll have another look. But to me, it's a maze...
>>
>>>>
>>>> Something, somewhere, sets up default entries for the 16 first entries
>>>> of the palette and seem to expect them to stay as some kind of safe
>>>> basic palette, and my applications don't handle it too well. When they
>>>> want to draw black, they get a poisonous cyan/green instead etc. But
>>>> it's pretty close. Can anyone provide some clue as to how that is
>>>> supposed to be handled?
>>>>
>>>> Also, I had to change the second argument of the drm_fbdev_cma_init...
>>>> call at the end of atmel_hlcdc_dc.c:atmel_hlcdc_dc_load() from 24 to 8
>>>> to make it possible to set 8-modes. However, doing so fucks up 24-bit
>>>> modes. Which made me suspect that no non-24-bit mode work w/o my patch.
>>>> And I could indeed only get 24-bit modes to work, unless I changed this
>>>> value to 16. Then RGB565 works like a charm, but RGB888 don't. What's
>>>> up with that? Seems like a rather silly limitation, but it's perhaps
>>>> just a bug?
>>>
>>> I'm pretty sure this is not a bug. AFAIR, prefered_bpp is used when you
>>> don't explicitly specify the video mode you want to use on the cmdline
>>> [1].
>>>
>>> [1]http://elixir.free-electrons.com/linux/v3.11/source/Documentation/fb/modedb.txt
>>>
>>
>> (Why refer to v3.11 docs?)
>>
>> Let's start with some basics, I tried to add
>>
>> video=atmel-hclcd-dc:1024x768-16
>>
>> and
>>
>> video=atmel_hclcd_dc:1024x768-16
>>
>> to the kernel cmdline of an unpatched linux-next kernel. No dice, I can
>> still only access RBG888. I'm obviously in need of some hand-holding...
>>
>> How am I supposed to get a 16-bit mode?
>
> You should have a look at [1].
>
> [1]https://www.at91.com/linux4sam/bin/view/Linux4SAM/UsingAtmelDRMDriver#Choose_supported_modes
>
Ahh, it works with video=Unknown-1:1024x768-16
Thanks!
So, is this below better? I'll follow-up with a patch I need for the
fbdev emulation to work.
I can't easily test this newfangled drm stuff, my userspace is oldish, so
I don't know if atmel_hlcdc_crtc_atomic_flush() is the correct place to
call atmel_hlcdc_crtc_flush_lut and have the palette loaded?
What I'm saying is that I have only tested the fbdev emulation, and I
still have trouble with the palette colors (poisonous green/cyan instead
of black etc). But that may only be an issue with fbdev?
Cheers,
peda
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 5348985..68f5e66 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -61,6 +61,7 @@ struct atmel_hlcdc_crtc {
struct atmel_hlcdc_dc *dc;
struct drm_pending_vblank_event *event;
int id;
+ u32 clut[256];
};
static inline struct atmel_hlcdc_crtc *
@@ -140,6 +141,46 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc
*c)
cfg);
}
+static void
+atmel_hlcdc_crtc_load_lut(struct drm_crtc *c)
+{
+ struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
+ struct atmel_hlcdc_dc *dc = crtc->dc;
+ int layer;
+ int idx;
+
+ for (layer = 0; layer < ATMEL_HLCDC_MAX_LAYERS; layer++) {
+ if (!dc->layers[layer])
+ continue;
+ for (idx = 0; idx < 256; idx++)
+ atmel_hlcdc_layer_write_clut(dc->layers[layer],
+ idx, crtc->clut[idx]);
+ }
+}
+
+static void
+atmel_hlcdc_crtc_flush_lut(struct drm_crtc *c)
+{
+ struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
+ struct drm_crtc_state *state = c->state;
+ struct drm_color_lut *lut;
+ int idx;
+
+ if (!state->gamma_lut)
+ return;
+
+ lut = (struct drm_color_lut *)state->gamma_lut->data;
+
+ for (idx = 0; idx < 256; idx++) {
+ crtc->clut[idx] =
+ ((lut[idx].red << 8) & 0xff0000) |
+ (lut[idx].green & 0xff00) |
+ (lut[idx].blue >> 8);
+ }
+
+ atmel_hlcdc_crtc_load_lut(c);
+}
+
static enum drm_mode_status
atmel_hlcdc_crtc_mode_valid(struct drm_crtc *c,
const struct drm_display_mode *mode)
@@ -312,6 +353,9 @@ static void atmel_hlcdc_crtc_atomic_flush(struct drm_crtc
*crtc,
struct drm_crtc_state *old_s)
{
/* TODO: write common plane control register if available */
+
+ if (crtc->state->color_mgmt_changed)
+ atmel_hlcdc_crtc_flush_lut(crtc);
}
static const struct drm_crtc_helper_funcs lcdc_crtc_helper_funcs = {
@@ -429,6 +473,7 @@ static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs =
{
.atomic_destroy_state = atmel_hlcdc_crtc_destroy_state,
.enable_vblank = atmel_hlcdc_crtc_enable_vblank,
.disable_vblank = atmel_hlcdc_crtc_disable_vblank,
+ .set_property = drm_atomic_helper_crtc_set_property,
};
int atmel_hlcdc_crtc_create(struct drm_device *dev)
@@ -484,6 +529,9 @@ int atmel_hlcdc_crtc_create(struct drm_device *dev)
drm_crtc_helper_add(&crtc->base, &lcdc_crtc_helper_funcs);
drm_crtc_vblank_reset(&crtc->base);
+ drm_mode_crtc_set_gamma_size(&crtc->base, 256);
+ drm_crtc_enable_color_mgmt(&crtc->base, 0, false, 256);
+
dc->crtc = &crtc->base;
return 0;
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 30dbffd..4f6ef07 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -42,6 +42,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_at91sam9n12_layers[] = {
.default_color = 3,
.general_config = 4,
},
+ .clut_offset = 0x400,
},
};
@@ -73,6 +74,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_at91sam9x5_layers[] = {
.disc_pos = 5,
.disc_size = 6,
},
+ .clut_offset = 0x400,
},
{
.name = "overlay1",
@@ -91,6 +93,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_at91sam9x5_layers[] = {
.chroma_key_mask = 8,
.general_config = 9,
},
+ .clut_offset = 0x800,
},
{
.name = "high-end-overlay",
@@ -112,6 +115,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_at91sam9x5_layers[] = {
.scaler_config = 13,
.csc = 14,
},
+ .clut_offset = 0x1000,
},
{
.name = "cursor",
@@ -131,6 +135,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_at91sam9x5_layers[] = {
.chroma_key_mask = 8,
.general_config = 9,
},
+ .clut_offset = 0x1400,
},
};
@@ -162,6 +167,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d3_layers[] = {
.disc_pos = 5,
.disc_size = 6,
},
+ .clut_offset = 0x600,
},
{
.name = "overlay1",
@@ -180,6 +186,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d3_layers[] = {
.chroma_key_mask = 8,
.general_config = 9,
},
+ .clut_offset = 0xa00,
},
{
.name = "overlay2",
@@ -198,6 +205,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d3_layers[] = {
.chroma_key_mask = 8,
.general_config = 9,
},
+ .clut_offset = 0xe00,
},
{
.name = "high-end-overlay",
@@ -223,6 +231,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d3_layers[] = {
},
.csc = 14,
},
+ .clut_offset = 0x1200,
},
{
.name = "cursor",
@@ -244,6 +253,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d3_layers[] = {
.general_config = 9,
.scaler_config = 13,
},
+ .clut_offset = 0x1600,
},
};
@@ -275,6 +285,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d4_layers[] = {
.disc_pos = 5,
.disc_size = 6,
},
+ .clut_offset = 0x600,
},
{
.name = "overlay1",
@@ -293,6 +304,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d4_layers[] = {
.chroma_key_mask = 8,
.general_config = 9,
},
+ .clut_offset = 0xa00,
},
{
.name = "overlay2",
@@ -336,6 +348,7 @@ static const struct atmel_hlcdc_layer_desc
atmel_hlcdc_sama5d4_layers[] = {
},
.csc = 14,
},
+ .clut_offset = 0x1200,
},
};
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
index b0596a8..a2cc2ab 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -88,6 +88,11 @@
#define ATMEL_HLCDC_YUV422SWP BIT(17)
#define ATMEL_HLCDC_DSCALEOPT BIT(20)
+#define ATMEL_HLCDC_C1_MODE ATMEL_HLCDC_CLUT_MODE(0)
+#define ATMEL_HLCDC_C2_MODE ATMEL_HLCDC_CLUT_MODE(1)
+#define ATMEL_HLCDC_C4_MODE ATMEL_HLCDC_CLUT_MODE(2)
+#define ATMEL_HLCDC_C8_MODE ATMEL_HLCDC_CLUT_MODE(3)
+
#define ATMEL_HLCDC_XRGB4444_MODE ATMEL_HLCDC_RGB_MODE(0)
#define ATMEL_HLCDC_ARGB4444_MODE ATMEL_HLCDC_RGB_MODE(1)
#define ATMEL_HLCDC_RGBA4444_MODE ATMEL_HLCDC_RGB_MODE(2)
@@ -259,6 +264,7 @@ struct atmel_hlcdc_layer_desc {
int id;
int regs_offset;
int cfgs_offset;
+ int clut_offset;
struct atmel_hlcdc_formats *formats;
struct atmel_hlcdc_layer_cfg_layout layout;
int max_width;
@@ -414,6 +420,14 @@ static inline u32 atmel_hlcdc_layer_read_cfg(struct
atmel_hlcdc_layer *layer,
(cfgid * sizeof(u32)));
}
+static inline void atmel_hlcdc_layer_write_clut(struct atmel_hlcdc_layer
*layer,
+ unsigned int c, u32 val)
+{
+ atmel_hlcdc_layer_write_reg(layer,
+ layer->desc->clut_offset + c * sizeof(u32),
+ val);
+}
+
static inline void atmel_hlcdc_layer_init(struct atmel_hlcdc_layer *layer,
const struct atmel_hlcdc_layer_desc *desc,
struct regmap *regmap)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index 1124200..5537843 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -83,6 +83,7 @@ drm_plane_state_to_atmel_hlcdc_plane_state(struct
drm_plane_state *s)
#define SUBPIXEL_MASK 0xffff
static uint32_t rgb_formats[] = {
+ DRM_FORMAT_C8,
DRM_FORMAT_XRGB4444,
DRM_FORMAT_ARGB4444,
DRM_FORMAT_RGBA4444,
@@ -100,6 +101,7 @@ struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats = {
};
static uint32_t rgb_and_yuv_formats[] = {
+ DRM_FORMAT_C8,
DRM_FORMAT_XRGB4444,
DRM_FORMAT_ARGB4444,
DRM_FORMAT_RGBA4444,
@@ -128,6 +130,9 @@ struct atmel_hlcdc_formats
atmel_hlcdc_plane_rgb_and_yuv_formats = {
static int atmel_hlcdc_format_to_plane_mode(u32 format, u32 *mode)
{
switch (format) {
+ case DRM_FORMAT_C8:
+ *mode = ATMEL_HLCDC_C8_MODE;
+ break;
case DRM_FORMAT_XRGB4444:
*mode = ATMEL_HLCDC_XRGB4444_MODE;
break;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
