On Tue, Jun 13, 2017 at 01:50:38PM -0400, mathieu.larou...@matrox.com wrote:
> From: Mathieu Larouche <mathieu.larou...@matrox.com>
>
> - Changed the HiPri value for G200e4 to always be 0.
> - Added Bandwith limitation to block resolution above 1920x1200x60Hz
Hi Mathieu,
There's no Signed-off-by on this patch, can you please resend with the tag?
Thanks
> ---
> drivers/gpu/drm/mgag200/mgag200_mode.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c
> b/drivers/gpu/drm/mgag200/mgag200_mode.c
> index 6b21cb2..292e8eb 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_mode.c
> +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
> @@ -1133,7 +1133,10 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
>
>
> if (IS_G200_SE(mdev)) {
> - if (mdev->unique_rev_id >= 0x02) {
> + if (mdev->unique_rev_id >= 0x04) {
> + WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
> + WREG8(MGAREG_CRTCEXT_DATA, 0);
> + } else if (mdev->unique_rev_id >= 0x02) {
> u8 hi_pri_lvl;
> u32 bpp;
> u32 mb;
> @@ -1598,6 +1601,10 @@ static int mga_vga_mode_valid(struct drm_connector
> *connector,
> if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> > (30100 * 1024))
> return MODE_BANDWIDTH;
> + } else {
> + if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> + > (55000 * 1024))
> + return MODE_BANDWIDTH;
> }
> } else if (mdev->type == G200_WB) {
> if (mode->hdisplay > 1280)
> --
> 1.8.3.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
