On Thu, May 25, 2017 at 03:19:16PM +0100, Jose Abreu wrote:
> This patches makes use of the new mode_valid() callbacks introduced
> previously to validate the full video pipeline when modesetting.
>
> This calls the connector->mode_valid(), encoder->mode_valid(),
> bridge->mode_valid() and crtc->mode_valid() so that we can
> make sure that the mode will be accepted in every components.
>
> Signed-off-by: Jose Abreu <joab...@synopsys.com>
> Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>
> Cc: Carlos Palminha <palmi...@synopsys.com>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Cc: Daniel Vetter <daniel.vet...@ffwll.ch>
> Cc: Dave Airlie <airl...@linux.ie>
> Cc: Andrzej Hajda <a.ha...@samsung.com>
> Cc: Archit Taneja <arch...@codeaurora.org>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
>
> Changes v1->v2:
> - Removed call to connector->mode_valid (Ville, Daniel)
> - Changed function name (Ville)
> - Use for_each_new_connector_in_state (Ville)
> - Do not validate if connector and mode didn't change (Ville)
> - Use new helpers to call mode_valid
>
> Signed-off-by: Jose Abreu <joab...@synopsys.com>
Ok, merged up to this one to drm-misc-next, thanks a lot. I'll leave
merging the conversion patches to respective maintainers.
-Daniel
> ---
> drivers/gpu/drm/drm_atomic_helper.c | 76
> +++++++++++++++++++++++++++++++++++--
> 1 file changed, 73 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c
> b/drivers/gpu/drm/drm_atomic_helper.c
> index 6426339..21afca4 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -32,6 +32,7 @@
> #include <drm/drm_atomic_helper.h>
> #include <linux/dma-fence.h>
>
> +#include "drm_crtc_helper_internal.h"
> #include "drm_crtc_internal.h"
>
> /**
> @@ -452,6 +453,69 @@ static int handle_conflicting_encoders(struct
> drm_atomic_state *state,
> return 0;
> }
>
> +static enum drm_mode_status mode_valid_path(struct drm_connector *connector,
> + struct drm_encoder *encoder,
> + struct drm_crtc *crtc,
> + struct drm_display_mode *mode)
> +{
> + enum drm_mode_status ret;
> +
> + ret = drm_encoder_mode_valid(encoder, mode);
> + if (ret != MODE_OK) {
> + DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] mode_valid() failed\n",
> + encoder->base.id, encoder->name);
> + return ret;
> + }
> +
> + ret = drm_bridge_mode_valid(encoder->bridge, mode);
> + if (ret != MODE_OK) {
> + DRM_DEBUG_ATOMIC("[BRIDGE] mode_valid() failed\n");
> + return ret;
> + }
> +
> + ret = drm_crtc_mode_valid(crtc, mode);
> + if (ret != MODE_OK) {
> + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode_valid() failed\n",
> + crtc->base.id, crtc->name);
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static int
> +mode_valid(struct drm_atomic_state *state)
> +{
> + struct drm_connector_state *conn_state;
> + struct drm_connector *connector;
> + int i;
> +
> + for_each_new_connector_in_state(state, connector, conn_state, i) {
> + struct drm_encoder *encoder = conn_state->best_encoder;
> + struct drm_crtc *crtc = conn_state->crtc;
> + struct drm_crtc_state *crtc_state;
> + enum drm_mode_status mode_status;
> + struct drm_display_mode *mode;
> +
> + if (!crtc || !encoder)
> + continue;
> +
> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> + if (!crtc_state)
> + continue;
> + if (!crtc_state->mode_changed &&
> !crtc_state->connectors_changed)
> + continue;
> +
> + mode = &crtc_state->mode;
> +
> + mode_status = mode_valid_path(connector, encoder, crtc, mode);
> + if (mode_status != MODE_OK)
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> /**
> * drm_atomic_helper_check_modeset - validate state object for modeset
> changes
> * @dev: DRM device
> @@ -466,13 +530,15 @@ static int handle_conflicting_encoders(struct
> drm_atomic_state *state,
> * 2. &drm_connector_helper_funcs.atomic_check to validate the connector
> state.
> * 3. If it's determined a modeset is needed then all connectors on the
> affected crtc
> * crtc are added and &drm_connector_helper_funcs.atomic_check is run on
> them.
> - * 4. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
> - * 5. &drm_encoder_helper_funcs.atomic_check is called to validate any
> encoder state.
> + * 4. &drm_encoder_helper_funcs.mode_valid, &drm_bridge_funcs.mode_valid and
> + * &drm_crtc_helper_funcs.mode_valid are called on the affected
> components.
> + * 5. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
> + * 6. &drm_encoder_helper_funcs.atomic_check is called to validate any
> encoder state.
> * This function is only called when the encoder will be part of a
> configured crtc,
> * it must not be used for implementing connector property validation.
> * If this function is NULL, &drm_atomic_encoder_helper_funcs.mode_fixup
> is called
> * instead.
> - * 6. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode
> with crtc constraints.
> + * 7. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode
> with crtc constraints.
> *
> * &drm_crtc_state.mode_changed is set when the input mode is changed.
> * &drm_crtc_state.connectors_changed is set when a connector is added or
> @@ -617,6 +683,10 @@ static int handle_conflicting_encoders(struct
> drm_atomic_state *state,
> return ret;
> }
>
> + ret = mode_valid(state);
> + if (ret)
> + return ret;
> +
> return mode_fixup(state);
> }
> EXPORT_SYMBOL(drm_atomic_helper_check_modeset);
> --
> 1.9.1
>
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
