Hi Tomi, On Tuesday 23 May 2017 13:25:34 Tomi Valkeinen wrote: > On 23/05/17 12:48, Laurent Pinchart wrote: > > As the connector code can handle GPIO HPD thanks to patch 2/3, why does it > > have to be duplicated here ? I agree that encoders should support > > reporting of hotplug events when the HPD signal is connected to an > > encoder, but if it's connected to a GPIO, it seems to me that it should > > be the sole responsibility of the connector code to handle it. > > The HPD line goes from the connector to TPD12S015. From TPD12S015 > another line goes to the SoCs GPIO.
Isn't it the same signal, just with glitches filtered ? The TPD12S015 is an ESD clamp, level shifter and DC-DC converter, if it wasn't for the two control inputs CT_CP_HPD and LS_OE, we could probably do without a driver. I wouldn't add HPD support to this driver, as the chip really can't detect HPD. -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
