On 17.04.2017 08:02, Hoegeun Kwon wrote:
> This patch add the panel device tree node for s6e3hf2 display
> controller to TM2e dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.k...@samsung.com>
Maybe it would be good to remove te-gpios property - tm2/tm2e uses
hardware trigger, so it is not necessary and generates useless interrupts.
Beside this:
Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>
--
Regards
Andrzej
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> index 694717a..98ad094 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -52,6 +52,18 @@
> assigned-clock-rates = <278000000>, <400000000>;
> };
>
> +&dsi {
> + panel@0 {
> + compatible = "samsung,s6e3hf2";
> + reg = <0>;
> + vdd3-supply = <&ldo27_reg>;
> + vci-supply = <&ldo28_reg>;
> + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
> + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> &ldo31_reg {
> regulator-name = "TSP_VDD_1.8V_AP";
> regulator-min-microvolt = <1800000>;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
