On Sat, Apr 01, 2017 at 07:35:25PM +0800, Jeffy Chen wrote:
Hi Jeffy,
Could you please add commit messages describing *why* you're making the change?
It might be obvious to you (and maybe me), but others will benefit from better
descriptions.
> Signed-off-by: Jeffy Chen <jeffy.c...@rock-chips.com>
> ---
>
> Changes in v2: None
>
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 31
> +++++++++++++++++++----------
> 1 file changed, 21 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 76c79ac..1d85319 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -1365,6 +1365,12 @@ static int vop_initial(struct vop *vop)
> return ret;
> }
>
> + ret = pm_runtime_get_sync(vop->dev);
> + if (ret < 0) {
> + dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
> + goto err_put_pm_runtime;
This should go to err_unprepare_dclk, the next error condition should go to
err_put_pm_runtime
> + }
> +
> /* Enable both the hclk and aclk to setup the vop */
> ret = clk_prepare_enable(vop->hclk);
> if (ret < 0) {
> @@ -1422,6 +1428,8 @@ static int vop_initial(struct vop *vop)
>
> vop->is_enabled = false;
>
> + pm_runtime_put_sync(vop->dev);
> +
> return 0;
>
> err_disable_aclk:
> @@ -1430,6 +1438,8 @@ static int vop_initial(struct vop *vop)
> clk_disable_unprepare(vop->hclk);
> err_unprepare_dclk:
> clk_unprepare(vop->dclk);
> +err_put_pm_runtime:
> + pm_runtime_put_sync(vop->dev);
Should be above err_unprepare_dclk
> return ret;
> }
>
> @@ -1530,12 +1540,6 @@ static int vop_bind(struct device *dev, struct device
> *master, void *data)
> if (!vop->regsbak)
> return -ENOMEM;
>
> - ret = vop_initial(vop);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
> - return ret;
> - }
> -
> irq = platform_get_irq(pdev, 0);
> if (irq < 0) {
> dev_err(dev, "cannot find irq for vop\n");
> @@ -1556,15 +1560,22 @@ static int vop_bind(struct device *dev, struct device
> *master, void *data)
> /* IRQ is initially disabled; it gets enabled in power_on */
> disable_irq(vop->irq);
>
> + pm_runtime_enable(&pdev->dev);
> +
> + ret = vop_initial(vop);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
> + goto err_disable_pm_runtime;
> + }
This function move would be a lot easier to understand with a commit message ;-)
> +
> ret = vop_create_crtc(vop);
> if (ret)
> - goto err_enable_irq;
> -
> - pm_runtime_enable(&pdev->dev);
> + goto err_disable_pm_runtime;
Do you have anything to clean up from vop_initial()?
>
> return 0;
>
> -err_enable_irq:
> +err_disable_pm_runtime:
> + pm_runtime_disable(&pdev->dev);
> enable_irq(vop->irq); /* To balance out the disable_irq above */
> return ret;
> }
> --
> 2.1.4
>
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
