Hi Tomi,
Thank you for the patch.
On Tuesday 28 Mar 2017 16:07:51 Tomi Valkeinen wrote:
> The clock source selection for the LCD outputs is too hardcoded at the
> moment. For example, LCD3 is set to use PLL2_1, and PLL2 doesn't exist
> on DRA72x SoCs.
>
> There are quite many ways to configure the clocks, even using HDMI PLL
> for LCD outputs, but enabling full configuration of the clocks is rather
> tricky.
>
> This patch improves the situation a bit by checking if the PLL about to
> be used exists, and if not, tries another one.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
> ---
> drivers/gpu/drm/omapdrm/dss/dpi.c | 47 +++++++++++++++++++++++++++---------
> 1 file changed, 37 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c
> b/drivers/gpu/drm/omapdrm/dss/dpi.c index e0b0c5c24c55..0f32d5d078c6 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dpi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
> @@ -67,6 +67,42 @@ static struct dpi_data *dpi_get_data_from_pdev(struct
> platform_device *pdev) return dev_get_drvdata(&pdev->dev);
> }
>
> +static enum dss_clk_source dpi_get_clk_src_dra7xx(enum omap_channel
> channel)
> +{
> + /*
> + * Possible clock sources:
> + * LCD1: FCK/PLL1_1/HDMI_PLL
> + * LCD2: FCK/PLL1_3/HDMI_PLL (DRA74x: PLL2_3)
> + * LCD3: FCK/PLL1_3/HDMI_PLL (DRA74x: PLL2_1)
> + */
> +
> + switch (channel) {
> + case OMAP_DSS_CHANNEL_LCD:
> + {
> + if (dss_pll_find_by_src(DSS_CLK_SRC_PLL1_1))
> + return DSS_CLK_SRC_PLL1_1;
> + }
Aren't you missing break statements ?
> + case OMAP_DSS_CHANNEL_LCD2:
> + {
> + if (dss_pll_find_by_src(DSS_CLK_SRC_PLL1_3))
> + return DSS_CLK_SRC_PLL1_3;
> + if (dss_pll_find_by_src(DSS_CLK_SRC_PLL2_3))
> + return DSS_CLK_SRC_PLL2_3;
> + }
> + case OMAP_DSS_CHANNEL_LCD3:
> + {
> + if (dss_pll_find_by_src(DSS_CLK_SRC_PLL2_1))
> + return DSS_CLK_SRC_PLL2_1;
> + if (dss_pll_find_by_src(DSS_CLK_SRC_PLL1_3))
> + return DSS_CLK_SRC_PLL1_3;
What happens if LCD2 is already using PLL1_3 ?
> + }
> + default:
> + break;
> + }
> +
> + return DSS_CLK_SRC_FCK;
> +}
> +
> static enum dss_clk_source dpi_get_clk_src(enum omap_channel channel)
> {
> /*
> @@ -107,16 +143,7 @@ static enum dss_clk_source dpi_get_clk_src(enum
> omap_channel channel) }
>
> case OMAPDSS_VER_DRA7xx:
> - switch (channel) {
> - case OMAP_DSS_CHANNEL_LCD:
> - return DSS_CLK_SRC_PLL1_1;
> - case OMAP_DSS_CHANNEL_LCD2:
> - return DSS_CLK_SRC_PLL1_3;
> - case OMAP_DSS_CHANNEL_LCD3:
> - return DSS_CLK_SRC_PLL2_1;
> - default:
> - return DSS_CLK_SRC_FCK;
> - }
> + return dpi_get_clk_src_dra7xx(channel);
>
> default:
> return DSS_CLK_SRC_FCK;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
