On 10.03.2017 05:32, Sean Paul wrote:
> From: zain wang <w...@rock-chips.com>
>
> There some different bit between Rockchip and Exynos in register "AUX_PD",
> So let's fix the incorrect operations about it.
There are more differences.
>
> Cc: Douglas Anderson <diand...@chromium.org>
> Signed-off-by: zain wang <w...@rock-chips.com>
> Signed-off-by: Sean Paul <seanp...@chromium.org>
Beside description and subject.
Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>
--
Regards
Andrzej
> ---
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 116
> ++++++++++++----------
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 2 +
> 2 files changed, 64 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index bb72f8b0e603..377bee4e20fd 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -248,76 +248,84 @@ void analogix_dp_set_analog_power_down(struct
> analogix_dp_device *dp,
> {
> u32 reg;
> u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
> + u32 mask;
>
> if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> phy_pd_addr = ANALOGIX_DP_PD;
>
> switch (block) {
> case AUX_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= AUX_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~AUX_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> + mask = RK_AUX_PD;
> + else
> + mask = AUX_PD;
> +
> + reg = readl(dp->reg_base + phy_pd_addr);
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH0_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH0_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH0_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH0_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH1_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH1_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH1_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH1_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH2_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH2_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH2_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH2_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH3_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH3_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH3_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH3_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case ANALOG_TOTAL:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= DP_PHY_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~DP_PHY_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + /*
> + * There is no bit named DP_PHY_PD, so We used DP_INC_BG
> + * to power off everything instead of DP_PHY_PD in
> + * Rockchip
> + */
> + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> + mask = DP_INC_BG;
> + else
> + mask = DP_PHY_PD;
> +
> + reg = readl(dp->reg_base + phy_pd_addr);
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> + usleep_range(10, 15);
> break;
> case POWER_ALL:
> if (enable) {
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> index 9602668669f4..b633a4a5082a 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> @@ -345,7 +345,9 @@
> #define DP_INC_BG (0x1 << 7)
> #define DP_EXP_BG (0x1 << 6)
> #define DP_PHY_PD (0x1 << 5)
> +#define RK_AUX_PD (0x1 << 5)
> #define AUX_PD (0x1 << 4)
> +#define RK_PLL_PD (0x1 << 4)
> #define CH3_PD (0x1 << 3)
> #define CH2_PD (0x1 << 2)
> #define CH1_PD (0x1 << 1)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
