The backporch programmed into the tcon registers is actually the
backporch + hsync length from the display timings, as indicated in
the interface timing diagrams found in the user manual of the A31
and A33 SoCs.
The comments for channel 0 mistakenly describe the discrepancy as
TCON backporch = frontporch + hsync.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index ee51d7e77a6a..c52c482c8fd0 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -143,7 +143,7 @@ void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
/*
* This is called a backporch in the register documentation,
- * but it really is the front porch + hsync
+ * but it really is the back porch + hsync
*/
bp = mode->crtc_htotal - mode->crtc_hsync_start;
DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
@@ -156,7 +156,7 @@ void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
/*
* This is called a backporch in the register documentation,
- * but it really is the front porch + hsync
+ * but it really is the back porch + hsync
*/
bp = mode->crtc_vtotal - mode->crtc_vsync_start;
DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
--
2.11.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
