From: Christopher Spinrath <christopher.spinr...@rwth-aachen.de>
The hpd pin of the second hdmi connector of the Utilite Pro is wired
up to a gpio pin of the SoC. Reflect this in the device tree.
Signed-off-by: Christopher Spinrath <christopher.spinr...@rwth-aachen.de>
---
arch/arm/boot/dts/imx6q-utilite-pro.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts
b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 69bdd82..d900ad6 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -101,9 +101,11 @@
hdmi-connector {
compatible = "hdmi-connector";
-
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hpd>;
type = "a";
ddc-i2c-bus = <&i2c_dvi_ddc>;
+ hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
port {
hdmi_connector_in: endpoint {
@@ -209,6 +211,12 @@
>;
};
+ pinctrl_hpd: hpdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
--
2.10.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
