Hi Laurent,
On 01-03-2017 22:39, Laurent Pinchart wrote:
> From: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
>
> The DWC HDMI TX controller interfaces with a companion PHY. While
> Synopsys provides multiple standard PHYs, SoC vendors can also integrate
> a custom PHY.
>
> Modularize PHY configuration to support vendor PHYs through platform
> data. The existing PHY configuration code was originally written to
> support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC
> MLP PHY. The HDMI 2.0 PHY will require a separate configuration
> function.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
> ---
> Changes since v1:
>
> - Check pdata->phy_configure in hdmi_phy_configure() to avoid
> dereferencing NULL pointer.
> ---
> drivers/gpu/drm/bridge/dw-hdmi.c | 109
> ++++++++++++++++++++++++++-------------
> include/drm/bridge/dw_hdmi.h | 7 +++
> 2 files changed, 81 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c
> b/drivers/gpu/drm/bridge/dw-hdmi.c
> index cb2703862be2..b835d81bb471 100644
> --- a/drivers/gpu/drm/bridge/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/dw-hdmi.c
> @@ -118,6 +118,9 @@ struct dw_hdmi_phy_data {
> const char *name;
> unsigned int gen;
> bool has_svsret;
> + int (*configure)(struct dw_hdmi *hdmi,
> + const struct dw_hdmi_plat_data *pdata,
> + unsigned long mpixelclock);
> };
>
> struct dw_hdmi {
> @@ -860,8 +863,8 @@ static bool hdmi_phy_wait_i2c_done(struct dw_hdmi *hdmi,
> int msec)
> return true;
> }
>
> -static void hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> - unsigned char addr)
> +void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> + unsigned char addr)
> {
> hdmi_writeb(hdmi, 0xFF, HDMI_IH_I2CMPHY_STAT0);
> hdmi_writeb(hdmi, addr, HDMI_PHY_I2CM_ADDRESS_ADDR);
> @@ -873,6 +876,7 @@ static void hdmi_phy_i2c_write(struct dw_hdmi *hdmi,
> unsigned short data,
> HDMI_PHY_I2CM_OPERATION_ADDR);
> hdmi_phy_wait_i2c_done(hdmi, 1000);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
>
> static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
> {
> @@ -993,37 +997,67 @@ static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi)
> return 0;
> }
>
> -static int hdmi_phy_configure(struct dw_hdmi *hdmi)
> +/*
> + * PHY configuration function for the DWC HDMI 3D TX PHY. Based on the
> available
> + * information the DWC MHL PHY has the same register layout and is thus also
> + * supported by this function.
> + */
> +static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi,
> + const struct dw_hdmi_plat_data *pdata,
> + unsigned long mpixelclock)
> {
> - const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> - const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
> const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
> const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
> const struct dw_hdmi_phy_config *phy_config = pdata->phy_config;
>
> /* PLL/MPLL Cfg - always match on final entry */
> for (; mpll_config->mpixelclock != ~0UL; mpll_config++)
> - if (hdmi->hdmi_data.video_mode.mpixelclock <=
> - mpll_config->mpixelclock)
> + if (mpixelclock <= mpll_config->mpixelclock)
> break;
>
> for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++)
> - if (hdmi->hdmi_data.video_mode.mpixelclock <=
> - curr_ctrl->mpixelclock)
> + if (mpixelclock <= curr_ctrl->mpixelclock)
> break;
>
> for (; phy_config->mpixelclock != ~0UL; phy_config++)
> - if (hdmi->hdmi_data.video_mode.mpixelclock <=
> - phy_config->mpixelclock)
> + if (mpixelclock <= phy_config->mpixelclock)
> break;
>
> if (mpll_config->mpixelclock == ~0UL ||
> curr_ctrl->mpixelclock == ~0UL ||
> - phy_config->mpixelclock == ~0UL) {
> - dev_err(hdmi->dev, "Pixel clock %d - unsupported by HDMI\n",
> - hdmi->hdmi_data.video_mode.mpixelclock);
> + phy_config->mpixelclock == ~0UL)
> return -EINVAL;
> - }
> +
> + dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
> + HDMI_3D_TX_PHY_CPCE_CTRL);
> + dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
> + HDMI_3D_TX_PHY_GMPCTRL);
> + dw_hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
> + HDMI_3D_TX_PHY_CURRCTRL);
> +
> + dw_hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
> + dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
> + HDMI_3D_TX_PHY_MSM_CTRL);
> +
> + dw_hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
> + dw_hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
> + HDMI_3D_TX_PHY_CKSYMTXCTRL);
> + dw_hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
> + HDMI_3D_TX_PHY_VLEVCTRL);
> +
> + /* Override and disable clock termination. */
> + dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
> + HDMI_3D_TX_PHY_CKCALCTRL);
> +
> + return 0;
> +}
> +
> +static int hdmi_phy_configure(struct dw_hdmi *hdmi)
> +{
> + const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> + const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
> + unsigned long mpixelclock = hdmi->hdmi_data.video_mode.mpixelclock;
> + int ret;
>
> dw_hdmi_phy_power_off(hdmi);
>
> @@ -1042,26 +1076,16 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
> HDMI_PHY_I2CM_SLAVE_ADDR);
> hdmi_phy_test_clear(hdmi, 0);
>
> - hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
> - HDMI_3D_TX_PHY_CPCE_CTRL);
> - hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
> - HDMI_3D_TX_PHY_GMPCTRL);
> - hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
> - HDMI_3D_TX_PHY_CURRCTRL);
> -
> - hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
> - hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
> - HDMI_3D_TX_PHY_MSM_CTRL);
> -
> - hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
> - hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
> - HDMI_3D_TX_PHY_CKSYMTXCTRL);
> - hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
> - HDMI_3D_TX_PHY_VLEVCTRL);
> -
> - /* Override and disable clock termination. */
> - hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
> - HDMI_3D_TX_PHY_CKCALCTRL);
> + /* Write to the PHY as configured by the platform */
> + if (pdata->configure_phy)
> + ret = pdata->configure_phy(hdmi, pdata, mpixelclock);
> + else
> + ret = phy->configure(hdmi, pdata, mpixelclock);
> + if (ret) {
> + dev_err(hdmi->dev, "PHY configuration failed (clock %lu)\n",
> + mpixelclock);
> + return ret;
> + }
>
> return dw_hdmi_phy_power_on(hdmi);
> }
> @@ -1895,24 +1919,31 @@ static const struct dw_hdmi_phy_data dw_hdmi_phys[] =
> {
> .name = "DWC MHL PHY + HEAC PHY",
> .gen = 2,
> .has_svsret = true,
> + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> }, {
> .type = DW_HDMI_PHY_DWC_MHL_PHY,
> .name = "DWC MHL PHY",
> .gen = 2,
> .has_svsret = true,
> + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> }, {
> .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC,
> .name = "DWC HDMI 3D TX PHY + HEAC PHY",
> .gen = 2,
> + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> }, {
> .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY,
> .name = "DWC HDMI 3D TX PHY",
> .gen = 2,
> + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> }, {
> .type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY,
> .name = "DWC HDMI 2.0 TX PHY",
> .gen = 2,
> .has_svsret = true,
> + }, {
> + .type = DW_HDMI_PHY_VENDOR_PHY,
> + .name = "Vendor PHY",
> }
> };
>
> @@ -1943,6 +1974,14 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
> hdmi->phy.ops = &dw_hdmi_synopsys_phy_ops;
> hdmi->phy.name = dw_hdmi_phys[i].name;
> hdmi->phy.data = (void *)&dw_hdmi_phys[i];
> +
> + if (!dw_hdmi_phys[i].configure &&
> + !hdmi->plat_data->configure_phy) {
> + dev_err(hdmi->dev, "%s requires platform
> support\n",
> + hdmi->phy.name);
> + return -ENODEV;
> + }
> +
> return 0;
> }
> }
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 0f583ca7e66e..dd330259a3dc 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -78,6 +78,9 @@ struct dw_hdmi_plat_data {
> const struct dw_hdmi_mpll_config *mpll_cfg;
> const struct dw_hdmi_curr_ctrl *cur_ctr;
> const struct dw_hdmi_phy_config *phy_config;
> + int (*configure_phy)(struct dw_hdmi *hdmi,
> + const struct dw_hdmi_plat_data *pdata,
> + unsigned long mpixelclock);
> };
>
> int dw_hdmi_probe(struct platform_device *pdev,
> @@ -91,4 +94,8 @@ void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned
> int rate);
> void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
> void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
>
> +/* PHY configuration */
> +void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> + unsigned char addr);
> +
> #endif /* __IMX_HDMI_H__ */
Hmm, this is kind of confusing. Why do you need a phy_ops and
then a separate configure_phy function? Can't we just use phy_ops
always? If its external phy then it would need to implement all
phy_ops functions.
Best regards,
Jose Miguel Abreu
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
