On Mon, Feb 06, 2017 at 11:29:50AM +0100, Hans Verkuil wrote:
> From: Benjamin Gaignard <benjamin.gaign...@linaro.org>
>
> By using the HPD notifier framework there is no longer any reason
> to manually set the physical address. This was the one blocking
> issue that prevented this driver from going out of staging, so do
> this move as well.
>
> Update the bindings documentation the new hdmi phandle.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaign...@linaro.org>
> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> CC: devicet...@vger.kernel.org
> ---
> .../devicetree/bindings/media/stih-cec.txt | 2 ++
> drivers/media/platform/Kconfig | 10 +++++++
> drivers/media/platform/Makefile | 1 +
> .../st-cec => media/platform/sti/cec}/Makefile | 0
> .../st-cec => media/platform/sti/cec}/stih-cec.c | 31
> +++++++++++++++++++---
> drivers/staging/media/Kconfig | 2 --
> drivers/staging/media/Makefile | 1 -
> drivers/staging/media/st-cec/Kconfig | 8 ------
> drivers/staging/media/st-cec/TODO | 7 -----
> 9 files changed, 41 insertions(+), 21 deletions(-)
> rename drivers/{staging/media/st-cec => media/platform/sti/cec}/Makefile
> (100%)
> rename drivers/{staging/media/st-cec => media/platform/sti/cec}/stih-cec.c
> (93%)
> delete mode 100644 drivers/staging/media/st-cec/Kconfig
> delete mode 100644 drivers/staging/media/st-cec/TODO
>
> diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt
> b/Documentation/devicetree/bindings/media/stih-cec.txt
> index 71c4b2f4bcef..7d82121d148a 100644
> --- a/Documentation/devicetree/bindings/media/stih-cec.txt
> +++ b/Documentation/devicetree/bindings/media/stih-cec.txt
> @@ -9,6 +9,7 @@ Required properties:
> - pinctrl-names: Contains only one value - "default"
> - pinctrl-0: Specifies the pin control groups used for CEC hardware.
> - resets: Reference to a reset controller
> + - st,hdmi-handle: Phandle to the HMDI controller
2 cases in this series. Just drop the vendor prefix on both.
s/HMDI/HDMI/
>
> Example for STIH407:
>
> @@ -22,4 +23,5 @@ sti-cec@094a087c {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_cec0_default>;
> resets = <&softreset STIH407_LPM_SOFTRESET>;
> + st,hdmi-handle = <&hdmi>;
> };
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
