Hi Andrzej,
On 2017-01-23 08:56, Andrzej Hajda wrote:
Ultra HD modes requires clock ticking at increased rate.
Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index f120d99..4d28e93 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
I think that exynos5433-tm2-common.dtsi is a better place for such
definitions.
They can be also moved to &cmu_disp node to match convention for the clocks
configuration used on particular board.
@@ -764,6 +764,17 @@
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x",
"sclk_decon_vclk", "sclk_decon_eclk";
+ assigned-clocks =
+ <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+ <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+ assigned-clock-parents =
+ <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+ <0>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+ assigned-clock-rates = <0>, <400000000>;
samsung,disp-sysreg = <&syscon_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
