Hi Laurent,
在 2017年01月13日 21:46, Laurent Pinchart 写道:
On Friday 13 Jan 2017 09:32:54 Nickey.Yang wrote:
在 2017年01月12日 23:26, Laurent Pinchart 写道:
On Thursday 12 Jan 2017 09:45:31 Nickey.Yang wrote:
在 2017年01月12日 07:49, Laurent Pinchart 写道:
Replace the hardcoded register address numerical values with macros to
clarify the code.
This change has been tested by comparing the assembly code before and
after the change.
Signed-off-by: Laurent Pinchart
<laurent.pinchart+rene...@ideasonboard.com>
---
drivers/gpu/drm/bridge/dw-hdmi.c | 35 ++++++++++++---------
drivers/gpu/drm/bridge/dw-hdmi.h | 66 +++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dw-hdmi.h
b/drivers/gpu/drm/bridge/dw-hdmi.h index a4fd64a203c9..f3c149c88d71
100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/dw-hdmi.h
@@ -1085,4 +1085,70 @@ enum {
HDMI_I2CM_CTLINT_ARB_MASK = 0x4,
};
+/*
+ * HDMI 3D TX PHY registers
+ */
Why is there 3D related words？
The register names come from the i.MX6 datasheet. I don't have access to
any PHY datasheet from Synopsys, and the Rockchip RK3288 manuals I've
been able to find don't document the HDMI PHY register. As the PHY used
by i.MX6 is a "DWC HDMI 3D TX PHY", I'd used that name in the code.
The "DWC MHL PHY" used by RK3288 seems to be use a similar (if not
identical) registers map, at least for the registers configured by the
driver. The "DWC HDMI 2.0 TX PHY" PHY used by R-Car Gen3, however, seems
not to have a compatible register interface, except for the
HDMI_3D_TX_PHY_PTRPT_ENBL register.
I'm open to suggestions for a better naming scheme. If you have additional
information that I don't have access to, please feel free to use them to
propose improvements or to point out my mistakes :-)
I did not find "3D" words in PHY IP vendor document.
How is the PHY named in the documentation you have access to ?
just remove 3D word，such as name HDMI_TX_PHY_PWRCTRL instead of
HDMI_3D_TX_PHY_PWRCTRL
in doc: HDMI Tx PHY for GLOBAL FOUNDRIES 28-nm SLP/1.8 V Databook,
LCA Edition
11.1 Control Registers Module Design Architecture
https://www.synopsys.com/dw/ipdir.php?ds=dwc_hdmi_14_csds_tx doesn't list that
document, but mentions "DesignWare Cores HDMI 3D TX PHY for GLOBALFOUNDARIES
28-nm SLP/1.8 V Databook". The description of the corresponding PHY, however,
is "HDMI 1.4 TX PHY 3.4Gbps in GF 28nm SLP 1.8V, East/West Poly Orientation".
I assume that HDMI 1.4 TX PHYs originally didn't have 3D support, and new PHYs
with 3D support were then named "HDMI 3D TX PHY". After some time PHYs without
3D support were dropped from the product line, and 3D then got dropped from
the name.
I agree with your point, I have compared the whole of registers, most of
them is the same.
This patch should not affect use, so i think weather the 3D words are
reserved or not is OK.
We could use the "HDMI_14_TX_PHY" prefix, to differentiate the registers from
the HDMI 2.0 TX PHY registers that would use a "HDMI_20_TX_PHY" prefix.
"HDMI_TX_PHY" prefix could be used for registers common between the two PHY
types. I'm sure that wouldn't cover the whole product range, but with no
additional information it's hard to come up with a better proposal (actually
even this wouldn't be very easy, as I don't have much documentation about the
HDMI 2.0 TX PHY registers).
By the way, does your HDMI TX controller databook (not the TX PHY but the TX
controller) mention "HDMI 3D TX PHY" in the config2_id register (0x0006)
documentation ? How does it name PHY type 0xF2 for instance ? And PHY type
0xC2, which I believe is the PHY used by the RK3288 (please correct me if I'm
wrong there) ?
Configuration Identification Register 2(0x0006)
Bits Name Description
7:0 phytype Indicates the type of PHY interface
selected:
0x00: Legacy PHY (HDMI TX PHY)
0xB2: PHY_HDMI-MHL with HEAC
0xC2: PHY_HDMI-MHL
0xF2: PHY_GEN2 (HDMI 3D TX PHY)
0xE2: PHY_GEN2 (HDMI 3D TX
PHY) + HEAC PHY
and in rk3288
root@linaro-alip:~# io -4 0xff980018
ff980018: 000000c2
RK3288 use "PHY_HDMI-MHL"
+#define HDMI_3D_TX_PHY_PWRCTRL 0x00
+#define HDMI_3D_TX_PHY_SERDIVCTRL 0x01
+#define HDMI_3D_TX_PHY_SERCKCTRL 0x02
+#define HDMI_3D_TX_PHY_SERCKKILLCTRL 0x03
+#define HDMI_3D_TX_PHY_TXRESCTRL 0x04
+#define HDMI_3D_TX_PHY_CKCALCTRL 0x05
+#define HDMI_3D_TX_PHY_CPCE_CTRL 0x06
+#define HDMI_3D_TX_PHY_TXCLKMEASCTRL 0x07
+#define HDMI_3D_TX_PHY_TXMEASCTRL 0x08
+#define HDMI_3D_TX_PHY_CKSYMTXCTRL 0x09
+#define HDMI_3D_TX_PHY_CMPSEQCTRL 0x0a
+#define HDMI_3D_TX_PHY_CMPPWRCTRL 0x0b
+#define HDMI_3D_TX_PHY_CMPMODECTRL 0x0c
+#define HDMI_3D_TX_PHY_MEASCTRL 0x0d
+#define HDMI_3D_TX_PHY_VLEVCTRL 0x0e
+#define HDMI_3D_TX_PHY_D2ACTRL 0x0f
+#define HDMI_3D_TX_PHY_CURRCTRL 0x10
+#define HDMI_3D_TX_PHY_DRVANACTRL 0x11
+#define HDMI_3D_TX_PHY_PLLMEASCTRL 0x12
+#define HDMI_3D_TX_PHY_PLLPHBYCTRL 0x13
+#define HDMI_3D_TX_PHY_GRP_CTRL 0x14
+#define HDMI_3D_TX_PHY_GMPCTRL 0x15
+#define HDMI_3D_TX_PHY_MPLLMEASCTRL 0x16
+#define HDMI_3D_TX_PHY_MSM_CTRL 0x17
+#define HDMI_3D_TX_PHY_SCRPB_STATUS 0x18
+#define HDMI_3D_TX_PHY_TXTERM 0x19
+#define HDMI_3D_TX_PHY_PTRPT_ENBL 0x1a
+#define HDMI_3D_TX_PHY_PATTERNGEN 0x1b
+#define HDMI_3D_TX_PHY_SDCAP_MODE 0x1c
+#define HDMI_3D_TX_PHY_SCOPEMODE 0x1d
+#define HDMI_3D_TX_PHY_DIGTXMODE 0x1e
+#define HDMI_3D_TX_PHY_STR_STATUS 0x1f
+#define HDMI_3D_TX_PHY_SCOPECNT0 0x20
+#define HDMI_3D_TX_PHY_SCOPECNT1 0x21
+#define HDMI_3D_TX_PHY_SCOPECNT2 0x22
+#define HDMI_3D_TX_PHY_SCOPECNTCLK 0x23
+#define HDMI_3D_TX_PHY_SCOPESAMPLE 0x24
+#define HDMI_3D_TX_PHY_SCOPECNTMSB01 0x25
+#define HDMI_3D_TX_PHY_SCOPECNTMSB2CK 0x26
+
+/* HDMI_3D_TX_PHY_CKCALCTRL values */
+#define HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE BIT(15)
+
+/* HDMI_3D_TX_PHY_MSM_CTRL values */
+#define HDMI_3D_TX_PHY_MSM_CTRL_MPLL_PH_SEL_CK BIT(13)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_CLK_REF_MPLL (0 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_OFF (1 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_PCLK (2 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK (3 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_SCOPE_CK_SEL BIT(0)
+
+/* HDMI_3D_TX_PHY_PTRPT_ENBL values */
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_OVERRIDE BIT(15)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_PG_SKIP_BIT2 BIT(8)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_PG_SKIP_BIT1 BIT(7)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_PG_SKIP_BIT0 BIT(6)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_CK_REF_ENB BIT(5)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_RCAL_ENB BIT(4)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_TX_CLK_ALIGN_ENB BIT(3)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_TX_READY BIT(2)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_CKO_WORD_ENB BIT(1)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_REFCLK_ENB BIT(0)
+
#endif /* __DW_HDMI_H__ */
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
