On 7 Nov. 2016 11:40, "Shawn Guo" <shawnguo at kernel.org> wrote: > > Hi David, Daniel, > > On Mon, Oct 31, 2016 at 05:17:22PM +0800, Shawn Guo wrote: > > From: Shawn Guo <shawn.guo at linaro.org> > > > > The series adds the initial ZTE VOU display controller DRM/KMS driver. > > There are still some features to be added, like overlay plane, scaling, > > and more output devices support. But it's already useful with dual > > CRTCs and HDMI display working. > > After a few rounds of reviewing (thanks to all reviewers), it seems that > the series is ready for merging, I guess? If so, could you suggest how > we proceed? I can prepare a pull request if you like. Thanks.
Yes at this stage a pull request is probably a good idea. Dave. > > Shawn > > > Changes for v4: > > - Move the hardware setup done in zx_hdmi_hw_init() and clock enable > > into .enable hook of drm_encoder_helper_funcs. > > - Compare pipe to crtc->index instead of using our own index counter. > > - Save the pipe check in zx_vou_enable[disable]_vblank by putting frame > > interrupt bit into zx_crtc_bits. > > - Use DRM_DEV_* for log messages instead of old dev_* functions > > - Return directly in case of -ETIMEDOUT in zx_hdmi_i2c_read to simplify > > the code for error condition. > > - Shuffle things around to make the crtc and plane state check in > > zx_gl_plane_atomic_check a bit clearer > > - Move hardware register definitions into headers instead of disturbing > > C file reading. > > - Save the call to drm_connector_unregister(), so that > > drm_connector_cleanup can directly be used as drm_connector_funcs > > .destroy hook. > > - Move vblank notification from .atomic_begin hook to .atomic_flush, > > so that vblank event is sent to user space after planes are committed > > rather than before. > > > > Changes for v3: > > - Rebase to v4.9-rc1 > > - Update bindings doc to use 'ranges' for address translation between > > parent and child devices. > > - Call drm_dev_register() last in bind function and drm_dev_unregister() > > first in unbind, so that drm_connector_regiser() can be saved from > > HDMI driver. > > - Instead of using open-coded drm_do_get_edid(), add an I2C adapter for > > HDMI DDC read and use drm_get_edid(). > > - Improve the plane .atomic_check implementation by calling helper > > function drm_plane_helper_check_state(). > > - Rename zx_crtc.c to zx_vou.c to avoid the confusion that the file > > implements crtc instance. > > - Store vou pointer in zx_crtc, so that we do not need to embed the > > pointer in zx_drm_private. > > - Create zx_readl/zx_writel/zx_writel_mask for register access. > > - Define a few macro helpers to ease the register bit setting, like > > SYNC_WIDE, BACK_PORCH and FRONT_PORCH. > > - Define main/aux channel specific register offset and bits in zx_crtc > > to save the use of is_main check > > - Sort include headers alphabetically > > - Removing encoder pointer out of the structure and constify struct > > vou_inf > > - Add log message for error conditions > > - Make the function calls in teardown path asymmetrical > > - A few coding style improvements like defining macro for sub-module > > address and changing code to save indentation level > > - Add a MAINTAINERS entry for ZTE ZX DRM driver > > > > Changes for v2: > > - Change device tree bindings to kill the virtual display-subsystem > > node make VOU the parent node. > > > > Shawn Guo (3): > > dt-bindings: add bindings doc for ZTE VOU display controller > > drm: zte: add initial vou drm driver > > MAINTAINERS: add an entry for ZTE ZX DRM driver > > > > .../devicetree/bindings/display/zte,vou.txt | 84 +++ > > MAINTAINERS | 7 + > > drivers/gpu/drm/Kconfig | 2 + > > drivers/gpu/drm/Makefile | 1 + > > drivers/gpu/drm/zte/Kconfig | 8 + > > drivers/gpu/drm/zte/Makefile | 7 + > > drivers/gpu/drm/zte/zx_drm_drv.c | 267 +++++++++ > > drivers/gpu/drm/zte/zx_drm_drv.h | 36 ++ > > drivers/gpu/drm/zte/zx_hdmi.c | 624 +++++++++++++++++++ > > drivers/gpu/drm/zte/zx_hdmi_regs.h | 56 ++ > > drivers/gpu/drm/zte/zx_plane.c | 299 ++++++++++ > > drivers/gpu/drm/zte/zx_plane.h | 26 + > > drivers/gpu/drm/zte/zx_plane_regs.h | 91 +++ > > drivers/gpu/drm/zte/zx_vou.c | 661 +++++++++++++++++++++ > > drivers/gpu/drm/zte/zx_vou.h | 46 ++ > > drivers/gpu/drm/zte/zx_vou_regs.h | 157 +++++ > > 16 files changed, 2372 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/zte,vou.txt > > create mode 100644 drivers/gpu/drm/zte/Kconfig > > create mode 100644 drivers/gpu/drm/zte/Makefile > > create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.c > > create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.h > > create mode 100644 drivers/gpu/drm/zte/zx_hdmi.c > > create mode 100644 drivers/gpu/drm/zte/zx_hdmi_regs.h > > create mode 100644 drivers/gpu/drm/zte/zx_plane.c > > create mode 100644 drivers/gpu/drm/zte/zx_plane.h > > create mode 100644 drivers/gpu/drm/zte/zx_plane_regs.h > > create mode 100644 drivers/gpu/drm/zte/zx_vou.c > > create mode 100644 drivers/gpu/drm/zte/zx_vou.h > > create mode 100644 drivers/gpu/drm/zte/zx_vou_regs.h > > > > -- > > 1.9.1 > > > _______________________________________________ > dri-devel mailing list > dri-devel at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20161107/113f38c4/attachment-0001.html>
