Add very basic ti-ftp410 HDMI transmitter driver. The only feature
separating this from a completely dummy bridge is the DDC i2c
support. However, other HW specific features may be added later when
needed. For instance there is a set of registers behind i2c if it is
connected. The implementations is tested against my new tilcdc bridge
support and works with BeagleBone DVI-D Cape Rev A3. A DT binding
document is also added.
Signed-off-by: Jyri Sarha <jsarha at ti.com>
---
.../bindings/display/bridge/ti,tfp410.txt | 30 ++++
drivers/gpu/drm/bridge/Kconfig | 7 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/ti-tfp410.c | 199 +++++++++++++++++++++
4 files changed, 237 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
create mode 100644 drivers/gpu/drm/bridge/ti-tfp410.c
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
new file mode 100644
index 0000000..dc93713
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
@@ -0,0 +1,30 @@
+TFP410 HDMI/DVI bridge bindings
+
+Required properties:
+ - compatible: "ti,tfp410"
+
+Optional properties:
+ - ddc-i2c: phandle of an I2C controller used for DDC EDID probing
+
+Optional subnodes:
+ - video input: this subnode can contain a video input port node
+ to connect the bridge to a display controller output (See this
+ documentation [1]).
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ hdmi-bridge {
+ compatible = "ti,tfp410";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dc_out>;
+ };
+ };
+ };
+ };
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index bd6acc8..a424e03 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -81,6 +81,13 @@ config DRM_TOSHIBA_TC358767
---help---
Toshiba TC358767 eDP bridge chip driver.
+config DRM_TI_TFP410
+ tristate "TI TFP410 DVI/HDMI bridge"
+ depends on OF
+ select DRM_KMS_HELPER
+ ---help---
+ Texas Instruments TFP410 DVI/HDMI Transmitter driver
+
source "drivers/gpu/drm/bridge/analogix/Kconfig"
source "drivers/gpu/drm/bridge/adv7511/Kconfig"
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 97ed1a5..8b065d9 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_DRM_SII902X) += sii902x.o
obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
+obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c
b/drivers/gpu/drm/bridge/ti-tfp410.c
new file mode 100644
index 0000000..b0753d2
--- /dev/null
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2016 Texas Instruments
+ * Author: Jyri Sarha <jsarha at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_graph.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+
+struct tfp410 {
+ struct drm_bridge bridge;
+ struct drm_connector connector;
+
+ struct i2c_adapter *ddc;
+
+ struct device *dev;
+};
+
+static inline struct tfp410 *
+drm_bridge_to_tfp410(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct tfp410, bridge);
+}
+
+static inline struct tfp410 *
+drm_connector_to_tfp410(struct drm_connector *connector)
+{
+ return container_of(connector, struct tfp410, connector);
+}
+
+static int tfp410_get_modes(struct drm_connector *connector)
+{
+ struct tfp410 *hdmi = drm_connector_to_tfp410(connector);
+ struct edid *edid;
+ int ret;
+
+ if (!hdmi->ddc)
+ goto fallback;
+
+ edid = drm_get_edid(connector, hdmi->ddc);
+ if (!edid) {
+ DRM_INFO("EDID read failed. Fallback to standard modes\n");
+ goto fallback;
+ }
+
+ drm_mode_connector_update_edid_property(connector, edid);
+
+ return drm_add_edid_modes(connector, edid);
+fallback:
+ /* No EDID, fallback on the XGA standard modes */
+ ret = drm_add_modes_noedid(connector, 1920, 1200);
+
+ /* And prefer a mode pretty much anything can handle */
+ drm_set_preferred_mode(connector, 1024, 768);
+
+ return ret;
+}
+
+static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = {
+ .get_modes = tfp410_get_modes,
+};
+
+static enum drm_connector_status
+tfp410_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct tfp410 *hdmi = drm_connector_to_tfp410(connector);
+
+ if (hdmi->ddc) {
+ if (drm_probe_ddc(hdmi->ddc))
+ return connector_status_connected;
+ else
+ return connector_status_disconnected;
+ }
+
+ return connector_status_unknown;
+}
+
+static const struct drm_connector_funcs tfp410_con_funcs = {
+ .dpms = drm_atomic_helper_connector_dpms,
+ .detect = tfp410_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = drm_connector_cleanup,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int tfp410_attach(struct drm_bridge *bridge)
+{
+ struct tfp410 *hdmi = drm_bridge_to_tfp410(bridge);
+ int ret;
+
+ if (!bridge->encoder) {
+ dev_err(hdmi->dev, "Missing encoder\n");
+ return -ENODEV;
+ }
+
+ drm_connector_helper_add(&hdmi->connector,
+ &tfp410_con_helper_funcs);
+ ret = drm_connector_init(bridge->dev, &hdmi->connector,
+ &tfp410_con_funcs, DRM_MODE_CONNECTOR_HDMIA);
+ if (ret) {
+ dev_err(hdmi->dev, "drm_connector_init() failed: %d\n", ret);
+ return ret;
+ }
+
+ drm_mode_connector_attach_encoder(&hdmi->connector,
+ bridge->encoder);
+
+ return 0;
+}
+
+static const struct drm_bridge_funcs tfp410_bridge_funcs = {
+ .attach = tfp410_attach,
+};
+
+static int tfp410_probe(struct platform_device *pdev)
+{
+ struct device_node *ddc_phandle;
+ struct tfp410 *hdmi;
+ int ret;
+
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+
+ hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, hdmi);
+
+ ddc_phandle = of_parse_phandle(pdev->dev.of_node, "ddc-i2c", 0);
+ if (ddc_phandle) {
+ hdmi->ddc = of_get_i2c_adapter_by_node(ddc_phandle);
+ of_node_put(ddc_phandle);
+ if (!hdmi->ddc)
+ return -EPROBE_DEFER;
+ } else {
+ dev_info(&pdev->dev,
+ "No ddc i2c bus, disabling EDID readout\n");
+ }
+
+ hdmi->bridge.funcs = &tfp410_bridge_funcs;
+ hdmi->bridge.of_node = pdev->dev.of_node;
+ hdmi->dev = &pdev->dev;
+
+ ret = drm_bridge_add(&hdmi->bridge);
+ if (ret) {
+ dev_err(&pdev->dev, "drm_bridge_add() failed: %d\n", ret);
+ goto fail;
+ }
+
+ return 0;
+fail:
+ i2c_put_adapter(hdmi->ddc);
+ return ret;
+}
+
+static int tfp410_remove(struct platform_device *pdev)
+{
+ struct tfp410 *hdmi = platform_get_drvdata(pdev);
+
+ drm_bridge_remove(&hdmi->bridge);
+
+ if (hdmi->ddc)
+ i2c_put_adapter(hdmi->ddc);
+
+ return 0;
+}
+
+static const struct of_device_id tfp410_match[] = {
+ { .compatible = "ti,tfp410" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, tfp410_match);
+
+struct platform_driver tfp410_driver = {
+ .probe = tfp410_probe,
+ .remove = tfp410_remove,
+ .driver = {
+ .name = "tfp410-bridge",
+ .of_match_table = tfp410_match,
+ },
+};
+module_platform_driver(tfp410_driver);
+
+MODULE_AUTHOR("Jyri Sarha <jsarha at ti.com>");
+MODULE_DESCRIPTION("TI TFP410 HDMI bridge driver");
+MODULE_LICENSE("GPL");
--
1.9.1
