[PATCH 16/20] ARM: sun5i: a13-olinuxino: Enable VGA bridge

[Maxime Ripard]

Now that we have support for the VGA bridges using our DRM driver, enable
the display engine for the Olimex A13-Olinuxino.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 34 +++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts 
b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index b3c234c65ea1..b3298d231258 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -72,6 +72,27 @@
                        default-state = "on";
                };
        };
+
+       bridge {
+               compatible = "dumb-vga-bridge";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port at 0 {
+                       reg = <0>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       vga_input: endpoint at 0 {
+                               reg = <0>;
+                               remote-endpoint = <&tcon0_out_vga>;
+                       };
+               };
+       };
+};
+
+&be0 {
+       status = "okay";
 };

 &ehci0 {
@@ -211,6 +232,19 @@
        status = "okay";
 };

+&tcon0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&lcd_rgb666_pins>;
+       status = "okay";
+};
+
+&tcon0_out {
+       tcon0_out_vga: endpoint at 0 {
+               reg = <0>;
+               remote-endpoint = <&vga_input>;
+       };
+};
+
 &uart1 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart1_pins_b>;
-- 
2.8.2