On Tue, May 03, 2016 at 11:05:24AM -0400, Vitaly Prosyak wrote:
> Cache in drm connector the edid range limits properties:
> min/max vertical refresh rates and max pixel clock.
> It would be used when enter to drr mode.
> 
> Signed-off-by: Vitaly Prosyak <vitaly.prosyak at amd.com>

Where's the patches that will use this? It might make sense to instead
have some helper functions to compute these values, so that drivers can
store them wherever they want/need. But impossible to tell without the
users of this stuff.
-Daniel

> ---
>  drivers/gpu/drm/drm_edid.c | 11 +++++++++++
>  include/drm/drm_crtc.h     |  5 +++++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 04cb487..7e49962 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -2190,6 +2190,17 @@ do_inferred_modes(struct detailed_timing *timing, void 
> *c)
>                                                         timing);
>               break;
>       case 0x01: /* just the ranges, no formula */
> +             closure->connector->min_vfreq = range->min_vfreq;
> +             closure->connector->max_vfreq = range->max_vfreq;
> +             if (closure->edid->revision >= 4) {
> +                     if ((range->flags & 0x03) == 0x3)
> +                             closure->connector->min_vfreq += 255;
> +                     if (range->flags & 0x02)
> +                             closure->connector->max_vfreq += 255;
> +             }
> +             closure->connector->max_pixel_clock_khz =
> +                     range_pixel_clock(closure->edid, (u8 *)timing);
> +             break;
>       default:
>               break;
>       }
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index c5b4b81..85fc554 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1230,6 +1230,11 @@ struct drm_connector {
>       uint8_t num_h_tile, num_v_tile;
>       uint8_t tile_h_loc, tile_v_loc;
>       uint16_t tile_h_size, tile_v_size;
> +
> +     /*EDID range limits for drr*/
> +     int min_vfreq ;
> +     int max_vfreq ;
> +     int max_pixel_clock_khz;
>  };
>  
>  /**
> -- 
> 1.9.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Reply via email to