[PATCH v13 14/14] arm64: dts: mt8173-evb: enable HDMI output

[Philipp Zabel]

Add an HDMI connector node and enable the devices that are part of the
HDMI display path: cec, dpi0, hdmi_phy, and hdmi0.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 38 +++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts 
b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index e427f04..5ee7f24 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -42,6 +42,44 @@
                gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
+
+       connector {
+               compatible = "hdmi-connector";
+               label = "hdmi";
+               type = "d";
+
+               port {
+                       hdmi_connector_in: endpoint {
+                               remote-endpoint = <&hdmi0_out>;
+                       };
+               };
+       };
+};
+
+&cec {
+       status = "okay";
+};
+
+&dpi0 {
+       status = "okay";
+};
+
+&hdmi_phy {
+       status = "okay";
+};
+
+&hdmi0 {
+       status = "okay";
+
+       ports {
+               port at 1 {
+                       reg = <1>;
+
+                       hdmi0_out: endpoint {
+                               remote-endpoint = <&hdmi_connector_in>;
+                       };
+               };
+       };
 };

 &i2c1 {
-- 
2.7.0