For dual link panel scenarios there are new fileds added in the
VBT which indicate on which port the PWM cntrl and CABC ON/OFF
commands needs to be sent.
v2: Moving the comment to intel_dsi.h(Jani)
Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Daniel Vetter <daniel.vetter at intel.com>
Cc: Yetunde Adebisi <yetundex.adebisi at intel.com>
Signed-off-by: Deepak M <m.deepak at intel.com>
---
drivers/gpu/drm/i915/intel_bios.c | 10 ++++++++++
drivers/gpu/drm/i915/intel_bios.h | 5 ++++-
drivers/gpu/drm/i915/intel_dsi.h | 9 +++++++++
3 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_bios.c
b/drivers/gpu/drm/i915/intel_bios.c
index bf62a19..4f5c0df 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -747,6 +747,16 @@ parse_mipi_config(struct drm_i915_private *dev_priv,
return;
}
+ /*
+ * These fileds are introduced from the VBT version 197 onwards,
+ * so making sure that these bits are set zero in the pervious
+ * versions.
+ */
+ if (dev_priv->vbt.dsi.config->dual_link && bdb->version < 197) {
+ dev_priv->vbt.dsi.config->dl_cabc_port = 0;
+ dev_priv->vbt.dsi.config->pwm_bkl_ctrl = 0;
+ }
+
/* We have mandatory mipi config blocks. Initialize as generic panel */
dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
}
diff --git a/drivers/gpu/drm/i915/intel_bios.h
b/drivers/gpu/drm/i915/intel_bios.h
index 350d4e0..8f295fd 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -846,7 +846,10 @@ struct mipi_config {
u16 dual_link:2;
u16 lane_cnt:2;
u16 pixel_overlap:3;
- u16 rsvd3:9;
+ u16 rgb_flip:1;
+ u16 dl_cabc_port:2;
+ u16 pwm_bkl_ctrl:2;
+ u16 rsvd3:4;
u16 rsvd4;
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index de7be7f..6dfa0e3 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -74,6 +74,15 @@ struct intel_dsi {
u8 escape_clk_div;
u8 dual_link;
+
+ /*
+ * Below field will inform us on which port the panel blk_cntrl
+ * and CABC ON/OFF commands needs to be sent in case of dual link
+ * panels
+ */
+ u8 bkl_dcs_ports;
+ u8 pwm_blk_ctrl;
+
u8 pixel_overlap;
u32 port_bits;
u32 bw_timer;
--
1.9.1
