MDSS and MDP5 have been separated out in the kernel driver. We no longer need to keep a track of the start of MDP addesses within MDSS.
Also, clean up the MDP5 register name prefix. Change it from "REG_MDP5_MDP_" to "REG_MDP5_". Signed-off-by: Archit Taneja <architt at codeaurora.org> --- Used by the "Enable DT Support" kernel patchset: https://lists.freedesktop.org/archives/dri-devel/2016-June/111837.html rnndb/mdp/mdp5.xml | 127 ++++++++++++++++++++++++++--------------------------- 1 file changed, 62 insertions(+), 65 deletions(-) diff --git a/rnndb/mdp/mdp5.xml b/rnndb/mdp/mdp5.xml index c829737..de9560b 100644 --- a/rnndb/mdp/mdp5.xml +++ b/rnndb/mdp/mdp5.xml @@ -139,74 +139,71 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="CLIENT2" low="16" high="23" type="uint"/> </bitset> - <!-- Even though there is 1 MDP, length=2 to force dynamic offset usage --> - <array doffsets="mdp5_cfg->mdp.base[0]" name="MDP" length="2" stride="0x1000"> - <reg32 offset="0x00000" name="HW_VERSION"> - <bitfield name="STEP" low="0" high="15" type="uint"/> - <bitfield name="MINOR" low="16" high="27" type="uint"/> - <bitfield name="MAJOR" low="28" high="31" type="uint"/> - </reg32> - - <reg32 offset="0x00004" name="DISP_INTF_SEL"> - <bitfield name="INTF0" low="0" high="7" type="mdp5_intf_type"/> - <bitfield name="INTF1" low="8" high="15" type="mdp5_intf_type"/> - <bitfield name="INTF2" low="16" high="23" type="mdp5_intf_type"/> - <bitfield name="INTF3" low="24" high="31" type="mdp5_intf_type"/> - </reg32> - <reg32 offset="0x00010" name="INTR_EN" type="MDP5_IRQ"/> - <reg32 offset="0x00014" name="INTR_STATUS" type="MDP5_IRQ"/> - <reg32 offset="0x00018" name="INTR_CLEAR" type="MDP5_IRQ"/> - <reg32 offset="0x0001C" name="HIST_INTR_EN"/> - <reg32 offset="0x00020" name="HIST_INTR_STATUS"/> - <reg32 offset="0x00024" name="HIST_INTR_CLEAR"/> - <reg32 offset="0x00028" name="SPARE_0"> - <bitfield name="SPLIT_DPL_SINGLE_FLUSH_EN" pos="0"/> - </reg32> - - <array offset="0x00080" name="SMP_ALLOC_W" length="8" stride="4"> - <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> - </array> - <array offset="0x00130" name="SMP_ALLOC_R" length="8" stride="4"> - <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> - </array> + <reg32 offset="0x00000" name="HW_VERSION"> + <bitfield name="STEP" low="0" high="15" type="uint"/> + <bitfield name="MINOR" low="16" high="27" type="uint"/> + <bitfield name="MAJOR" low="28" high="31" type="uint"/> + </reg32> + + <reg32 offset="0x00004" name="DISP_INTF_SEL"> + <bitfield name="INTF0" low="0" high="7" type="mdp5_intf_type"/> + <bitfield name="INTF1" low="8" high="15" type="mdp5_intf_type"/> + <bitfield name="INTF2" low="16" high="23" type="mdp5_intf_type"/> + <bitfield name="INTF3" low="24" high="31" type="mdp5_intf_type"/> + </reg32> + <reg32 offset="0x00010" name="INTR_EN" type="MDP5_IRQ"/> + <reg32 offset="0x00014" name="INTR_STATUS" type="MDP5_IRQ"/> + <reg32 offset="0x00018" name="INTR_CLEAR" type="MDP5_IRQ"/> + <reg32 offset="0x0001C" name="HIST_INTR_EN"/> + <reg32 offset="0x00020" name="HIST_INTR_STATUS"/> + <reg32 offset="0x00024" name="HIST_INTR_CLEAR"/> + <reg32 offset="0x00028" name="SPARE_0"> + <bitfield name="SPLIT_DPL_SINGLE_FLUSH_EN" pos="0"/> + </reg32> - <enum name="mdp5_igc_type"> - <value name="IGC_VIG" value="0"/> <!-- 0x200 --> - <value name="IGC_RGB" value="1"/> <!-- 0x210 --> - <value name="IGC_DMA" value="2"/> <!-- 0x220 --> - <value name="IGC_DSPP" value="3"/> <!-- 0x300 --> - </enum> - <array offsets="0x00200,0x00210,0x00220,0x00300" name="IGC" length="3" stride="0x10" index="mdp5_igc_type"> - <array offset="0x00" name="LUT" length="3" stride="4"> - <reg32 offset="0" name="REG"> - <bitfield name="VAL" low="0" high="11"/> - <bitfield name="INDEX_UPDATE" pos="25" type="boolean"/> - <!-- - not sure about these: - /* INDEX_UPDATE */ - data = (1 << 25) | (((~(1 << blk_idx)) & 0x7) << 28); - MDSS_MDP_REG_WRITE(offset, (cfg->c0_c1_data[0] & 0xFFF) | data); - --> - <bitfield name="DISABLE_PIPE_0" pos="28" type="boolean"/> - <bitfield name="DISABLE_PIPE_1" pos="29" type="boolean"/> - <bitfield name="DISABLE_PIPE_2" pos="30" type="boolean"/> - </reg32> - </array> + <array offset="0x00080" name="SMP_ALLOC_W" length="8" stride="4"> + <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> + </array> + <array offset="0x00130" name="SMP_ALLOC_R" length="8" stride="4"> + <reg32 offset="0" name="REG" type="mdp5_smp_alloc"/> + </array> + + <enum name="mdp5_igc_type"> + <value name="IGC_VIG" value="0"/> <!-- 0x200 --> + <value name="IGC_RGB" value="1"/> <!-- 0x210 --> + <value name="IGC_DMA" value="2"/> <!-- 0x220 --> + <value name="IGC_DSPP" value="3"/> <!-- 0x300 --> + </enum> + <array offsets="0x00200,0x00210,0x00220,0x00300" name="IGC" length="3" stride="0x10" index="mdp5_igc_type"> + <array offset="0x00" name="LUT" length="3" stride="4"> + <reg32 offset="0" name="REG"> + <bitfield name="VAL" low="0" high="11"/> + <bitfield name="INDEX_UPDATE" pos="25" type="boolean"/> + <!-- + not sure about these: + /* INDEX_UPDATE */ + data = (1 << 25) | (((~(1 << blk_idx)) & 0x7) << 28); + MDSS_MDP_REG_WRITE(offset, (cfg->c0_c1_data[0] & 0xFFF) | data); + --> + <bitfield name="DISABLE_PIPE_0" pos="28" type="boolean"/> + <bitfield name="DISABLE_PIPE_1" pos="29" type="boolean"/> + <bitfield name="DISABLE_PIPE_2" pos="30" type="boolean"/> + </reg32> </array> - <reg32 offset="0x002f4" name="SPLIT_DPL_EN"/> - <reg32 offset="0x002f8" name="SPLIT_DPL_UPPER"> - <bitfield name="SMART_PANEL" pos="1" type="boolean"/> - <bitfield name="SMART_PANEL_FREE_RUN" pos="2" type="boolean"/> - <bitfield name="INTF1_SW_TRG_MUX" pos="4" type="boolean"/> - <bitfield name="INTF2_SW_TRG_MUX" pos="8" type="boolean"/> - </reg32> - <reg32 offset="0x003f0" name="SPLIT_DPL_LOWER"> - <bitfield name="SMART_PANEL" pos="1" type="boolean"/> - <bitfield name="SMART_PANEL_FREE_RUN" pos="2" type="boolean"/> - <bitfield name="INTF1_TG_SYNC" pos="4" type="boolean"/> - <bitfield name="INTF2_TG_SYNC" pos="8" type="boolean"/> - </reg32> </array> + <reg32 offset="0x002f4" name="SPLIT_DPL_EN"/> + <reg32 offset="0x002f8" name="SPLIT_DPL_UPPER"> + <bitfield name="SMART_PANEL" pos="1" type="boolean"/> + <bitfield name="SMART_PANEL_FREE_RUN" pos="2" type="boolean"/> + <bitfield name="INTF1_SW_TRG_MUX" pos="4" type="boolean"/> + <bitfield name="INTF2_SW_TRG_MUX" pos="8" type="boolean"/> + </reg32> + <reg32 offset="0x003f0" name="SPLIT_DPL_LOWER"> + <bitfield name="SMART_PANEL" pos="1" type="boolean"/> + <bitfield name="SMART_PANEL_FREE_RUN" pos="2" type="boolean"/> + <bitfield name="INTF1_TG_SYNC" pos="4" type="boolean"/> + <bitfield name="INTF2_TG_SYNC" pos="8" type="boolean"/> + </reg32> <!-- check length/index.. --> <array doffsets="mdp5_cfg->ctl.base[0],mdp5_cfg->ctl.base[1],mdp5_cfg->ctl.base[2],mdp5_cfg->ctl.base[3],mdp5_cfg->ctl.base[4]" name="CTL" length="5" stride="0x400"> -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
