Hi, Bibby:

Some comments inline.

On Thu, 2016-07-07 at 15:37 +0800, Bibby Hsieh wrote:
> Some panels only accept bpc (bit per color) 6-bit.
> But, the default bpc in mt8173 display data path is 8-bit.
> If we didn't enable dithering function to convert bpc,
> display cannot show the smooth grayscale image.
> 
> In mt8173, the dithering function in OD (OverDrive) and
> GAMMA module, we have to config them with
> connector->display_mode.bpc when CRTC initial.
> 
> 1. Clear the default value at *_DITHER_5 and *_DITHER_7 register.
> 2. Calculate the LSB_ERR_SHIFT bits and ADD_LSHIFT bits two values.
> i.e. Input bpc of OD is 10 bits, we assume the bpc of panel is 6-bit,
> so, we need to set 4-bit to LSB_ERR_SHIFT and ADD_LSHIFT bits respectively.
> 3. Then, set the OD or GAMMA to dithering mode depends on path-1 or path-2.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |    3 +-
>  drivers/gpu/drm/mediatek/mtk_disp_rdma.c    |    3 +-
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |   21 ++++++--
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   77 
> +++++++++++++++++++++++----
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |    6 +--
>  5 files changed, 92 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c 
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 8f62671f..019b7ca 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -103,7 +103,8 @@ static void mtk_ovl_stop(struct mtk_ddp_comp *comp)
>  }
>  
>  static void mtk_ovl_config(struct mtk_ddp_comp *comp, unsigned int w,
> -                        unsigned int h, unsigned int vrefresh)
> +                        unsigned int h, unsigned int vrefresh,
> +                        unsigned int bpc)
>  {
>       if (w != 0 && h != 0)
>               writel_relaxed(h << 16 | w, comp->regs + DISP_REG_OVL_ROI_SIZE);
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c 
> b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> index 5fb80cb..0df05f9 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> @@ -106,7 +106,8 @@ static void mtk_rdma_stop(struct mtk_ddp_comp *comp)
>  }
>  
>  static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> -                         unsigned int height, unsigned int vrefresh)
> +                         unsigned int height, unsigned int vrefresh,
> +                         unsigned int bpc)
>  {
>       unsigned int threshold;
>       unsigned int reg;
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c 
> b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index ee219bb..18c9d0d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -222,7 +222,9 @@ static void mtk_crtc_ddp_clk_disable(struct mtk_drm_crtc 
> *mtk_crtc)
>  static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
>  {
>       struct drm_crtc *crtc = &mtk_crtc->base;
> -     unsigned int width, height, vrefresh;
> +     struct drm_connector *connector;
> +     struct drm_encoder *encoder;
> +     unsigned int width, height, vrefresh, bpc = 0;
>       int ret;
>       int i;
>  
> @@ -234,6 +236,19 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc 
> *mtk_crtc)
>       height = crtc->state->adjusted_mode.vdisplay;
>       vrefresh = crtc->state->adjusted_mode.vrefresh;
>  
> +     drm_for_each_encoder(encoder, crtc->dev) {
> +             if (encoder->crtc != crtc)
> +                     continue;
> +
> +             drm_for_each_connector(connector, crtc->dev) {
> +                     if (connector->encoder != encoder)
> +                             continue;
> +                     if (connector->display_info.bpc >= 3 &&

I think you should left this HW constrain in mtk_od_config() and
mtk_gamma_config(). Here just calculate the expected bpc.

> +                         (bpc == 0 || bpc > connector->display_info.bpc))

I think bpc should be initialized as HW default bpc and you can remove
this condiction 'bpc == 0' because we should set bpc to HW default bpc
while all connnector bpc is greater than HW default bpc.

> +                             bpc = connector->display_info.bpc;
> +             }
> +     }
> +
>       ret = pm_runtime_get_sync(crtc->dev->dev);
>       if (ret < 0) {
>               DRM_ERROR("Failed to enable power domain: %d\n", ret);
> @@ -266,7 +281,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc 
> *mtk_crtc)
>       for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
>               struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[i];
>  
> -             mtk_ddp_comp_config(comp, width, height, vrefresh);
> +             mtk_ddp_comp_config(comp, width, height, vrefresh, bpc);
>               mtk_ddp_comp_start(comp);
>       }
>  
> @@ -469,7 +484,7 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct 
> mtk_ddp_comp *ovl)
>       if (state->pending_config) {
>               mtk_ddp_comp_config(ovl, state->pending_width,
>                                   state->pending_height,
> -                                 state->pending_vrefresh);
> +                                 state->pending_vrefresh, 0);

Why set bpc as 0 here? Maybe you have a assumption that OVL don't care
the bpc parameter. If one day OVL care it and we do not review here, the
bugs happen.

>  
>               state->pending_config = false;
>       }
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c 
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 56c5894..c10faac 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -30,7 +30,26 @@
>  #define DISP_OD_INTEN                                0x0008
>  #define DISP_OD_INTSTA                               0x000c
>  #define DISP_OD_CFG                          0x0020
> +#define OD_RELAYMODE                         BIT(0)
> +#define OD_DITHERING                         BIT(2)
>  #define DISP_OD_SIZE                         0x0030
> +#define DISP_OD_DITHER_5                     0x0114
> +#define DISP_OD_DITHER_7                     0x011c
> +#define DISP_OD_DITHER_15                    0x013c
> +#define DITHER_LSB_ERR_SHIFT_R(x)            (((x) & 0x7) << 28)
> +#define DITHER_OVFLW_BIT_R(x)                        (((x) & 0x7) << 24)
> +#define DITHER_ADD_LSHIFT_R(x)                       (((x) & 0x7) << 20)
> +#define DITHER_ADD_RSHIFT_R(x)                       (((x) & 0x7) << 16)
> +#define DITHER_NEW_BIT_MODE                  BIT(0)
> +#define DISP_OD_DITHER_16                    0x140
> +#define DITHER_LSB_ERR_SHIFT_B(x)            (((x) & 0x7) << 28)
> +#define DITHER_OVFLW_BIT_B(x)                        (((x) & 0x7) << 24)
> +#define DITHER_ADD_LSHIFT_B(x)                       (((x) & 0x7) << 20)
> +#define DITHER_ADD_RSHIFT_B(x)                       (((x) & 0x7) << 16)
> +#define DITHER_LSB_ERR_SHIFT_G(x)            (((x) & 0x7) << 12)
> +#define DITHER_OVFLW_BIT_G(x)                        (((x) & 0x7) << 8)
> +#define DITHER_ADD_LSHIFT_G(x)                       (((x) & 0x7) << 4)
> +#define DITHER_ADD_RSHIFT_G(x)                       (((x) & 0x7) << 0)
>  
>  #define DISP_REG_UFO_START                   0x0000
>  
> @@ -44,25 +63,28 @@
>  
>  #define DISP_GAMMA_EN                                0x000
>  #define DISP_GAMMA_CFG                               0x020
> +#define GAMMA_EN                             BIT(0)
> +#define GAMMA_LUT_EN                         BIT(1)
> +#define GAMMA_DITHERING                              BIT(2)
>  #define DISP_GAMMA_SIZE                              0x030
>  #define DISP_GAMMA_LUT                               0x700
> +#define DISP_GAMMA_DITHER_5                  0x0114
> +#define DISP_GAMMA_DITHER_7                  0x011c
> +#define DISP_GAMMA_DITHER_15                 0x013c
> +#define DISP_GAMMA_DITHER_16                 0x0140
>  
>  #define LUT_10BIT_MASK                               0x3ff
>  
>  #define AAL_EN                       BIT(0)
>  
> -#define GAMMA_EN             BIT(0)
> -#define GAMMA_LUT_EN         BIT(1)
> -
> -#define      OD_RELAY_MODE           BIT(0)
> -
>  #define      UFO_BYPASS              BIT(2)
>  
>  #define      COLOR_BYPASS_ALL        BIT(7)
>  #define      COLOR_SEQ_SEL           BIT(13)
>  
>  static void mtk_color_config(struct mtk_ddp_comp *comp, unsigned int w,
> -                          unsigned int h, unsigned int vrefresh)
> +                          unsigned int h, unsigned int vrefresh,
> +                          unsigned int bpc)
>  {
>       writel(w, comp->regs + DISP_COLOR_WIDTH);
>       writel(h, comp->regs + DISP_COLOR_HEIGHT);
> @@ -76,14 +98,33 @@ static void mtk_color_start(struct mtk_ddp_comp *comp)
>  }
>  
>  static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
> -                       unsigned int h, unsigned int vrefresh)
> +                       unsigned int h, unsigned int vrefresh,
> +                       unsigned int bpc)
>  {
>       writel(w << 16 | h, comp->regs + DISP_OD_SIZE);
> +     if (bpc >= 3 && bpc < 10) {

Use symbol to replace magic number can improve the readability. For
example.

#define DITHER_MIN_BITS 3
#define DITHER_MAX_BITS 8

> +             writel(0, comp->regs + DISP_OD_DITHER_5);
> +             writel(0, comp->regs + DISP_OD_DITHER_7);
> +             writel(DITHER_LSB_ERR_SHIFT_R(10 - bpc) |
> +                    DITHER_ADD_LSHIFT_R(10 - bpc) |
> +                    DITHER_NEW_BIT_MODE,
> +                    comp->regs + DISP_OD_DITHER_15);
> +             writel(DITHER_LSB_ERR_SHIFT_B(10 - bpc) |
> +                    DITHER_ADD_LSHIFT_B(10 - bpc) |
> +                    DITHER_LSB_ERR_SHIFT_G(10 - bpc) |
> +                    DITHER_ADD_LSHIFT_G(10 - bpc),
> +                    comp->regs + DISP_OD_DITHER_16);
> +             writel(OD_DITHERING,
> +                    comp->regs + DISP_OD_CFG);
> +     } else {
> +             writel(OD_RELAYMODE,
> +                    comp->regs + DISP_OD_CFG);
> +     }
> +
>  }
>  
>  static void mtk_od_start(struct mtk_ddp_comp *comp)
>  {
> -     writel(OD_RELAY_MODE, comp->regs + DISP_OD_CFG);
>       writel(1, comp->regs + DISP_OD_EN);
>  }
>  
> @@ -93,7 +134,8 @@ static void mtk_ufoe_start(struct mtk_ddp_comp *comp)
>  }
>  
>  static void mtk_aal_config(struct mtk_ddp_comp *comp, unsigned int w,
> -                        unsigned int h, unsigned int vrefresh)
> +                        unsigned int h, unsigned int vrefresh,
> +                        unsigned int bpc)
>  {
>       writel(h << 16 | w, comp->regs + DISP_AAL_SIZE);
>  }
> @@ -109,9 +151,24 @@ static void mtk_aal_stop(struct mtk_ddp_comp *comp)
>  }
>  
>  static void mtk_gamma_config(struct mtk_ddp_comp *comp, unsigned int w,
> -                          unsigned int h, unsigned int vrefresh)
> +                          unsigned int h, unsigned int vrefresh,
> +                          unsigned int bpc)
>  {
>       writel(h << 16 | w, comp->regs + DISP_GAMMA_SIZE);
> +     if (bpc >= 3 && bpc < 10) {
> +             writel(0, comp->regs + DISP_GAMMA_DITHER_5);
> +             writel(0, comp->regs + DISP_GAMMA_DITHER_7);
> +             writel(DITHER_LSB_ERR_SHIFT_R(10 - bpc) |
> +                    DITHER_ADD_LSHIFT_R(10 - bpc) |
> +                    DITHER_NEW_BIT_MODE,
> +                    comp->regs + DISP_GAMMA_DITHER_15);
> +             writel(DITHER_LSB_ERR_SHIFT_B(10 - bpc) |
> +                    DITHER_ADD_LSHIFT_B(10 - bpc) |
> +                    DITHER_LSB_ERR_SHIFT_G(10 - bpc) |
> +                    DITHER_ADD_LSHIFT_G(10 - bpc),
> +                    comp->regs + DISP_GAMMA_DITHER_16);
> +             writel(GAMMA_DITHERING, comp->regs + DISP_GAMMA_CFG);
> +     }

This part is the same as mtk_od_config(), so it's better to have a
function 'mtk_dither_config()' and both mtk_od_config() and
mtk_gamma_config() call this function.

>  }
>  
>  static void mtk_gamma_start(struct mtk_ddp_comp *comp)
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h 
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index 07e17fe..c7c2e92 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -65,7 +65,7 @@ struct mtk_ddp_comp;
>  
>  struct mtk_ddp_comp_funcs {
>       void (*config)(struct mtk_ddp_comp *comp, unsigned int w,
> -                    unsigned int h, unsigned int vrefresh);
> +                    unsigned int h, unsigned int vrefresh, unsigned int bpc);
>       void (*start)(struct mtk_ddp_comp *comp);
>       void (*stop)(struct mtk_ddp_comp *comp);
>       void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
> @@ -89,10 +89,10 @@ struct mtk_ddp_comp {
>  
>  static inline void mtk_ddp_comp_config(struct mtk_ddp_comp *comp,
>                                      unsigned int w, unsigned int h,
> -                                    unsigned int vrefresh)
> +                                    unsigned int vrefresh, unsigned int bpc)
>  {
>       if (comp->funcs && comp->funcs->config)
> -             comp->funcs->config(comp, w, h, vrefresh);
> +             comp->funcs->config(comp, w, h, vrefresh, bpc);
>  }
>  
>  static inline void mtk_ddp_comp_start(struct mtk_ddp_comp *comp)


Reply via email to