Add simple-panel support for the Sharp LQ101K1LY04i, which is
a 10 inch WXGA (1280x800) lvds panel.
Signed-off-by: Joshua Clayton <stillcompiling at gmail.com>
---
Reposting again in hopes of getting this into 4.8
drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 3a7bdf1..c2d377c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1270,6 +1270,30 @@ static const struct panel_desc samsung_ltn140at29_301 = {
},
};
+static const struct display_timing sharp_lq101k1ly04_timing = {
+ .pixelclock = { 60000000, 65000000, 80000000 },
+ .hactive = { 1280, 1280, 1280 },
+ .hfront_porch = { 20, 20, 20 },
+ .hback_porch = { 20, 20, 20 },
+ .hsync_len = { 10, 10, 10 },
+ .vactive = { 800, 800, 800 },
+ .vfront_porch = { 4, 4, 4 },
+ .vback_porch = { 4, 4, 4 },
+ .vsync_len = { 4, 4, 4 },
+ .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static const struct panel_desc sharp_lq101k1ly04 = {
+ .timings = &sharp_lq101k1ly04_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 217,
+ .height = 136,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
+};
+
static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = {
.clock = 33300,
.hdisplay = 800,
@@ -1487,6 +1511,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "samsung,ltn140at29-301",
.data = &samsung_ltn140at29_301,
}, {
+ .compatible = "sharp,lq101k1ly04",
+ .data = &sharp_lq101k1ly04,
+ }, {
.compatible = "shelly,sca07010-bfn-lnn",
.data = &shelly_sca07010_bfn_lnn,
}, {
--
2.7.4
