From: Ville Syrjälä <ville.syrj...@linux.intel.com>
DP dual mode type 1 DVI adaptors aren't required to implement any
registers, so it's a bit hard to detect them. The best way would
be to check the state of the CONFIG1 pin, but we have no way to
do that. So as a last resort, check the VBT to see if the HDMI
port is in fact a dual mode capable DP port.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_bios.h | 3 +++
drivers/gpu/drm/i915/intel_dp.c | 28 ++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_hdmi.c | 23 +++++++++++++++++++++--
4 files changed, 53 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_bios.h
b/drivers/gpu/drm/i915/intel_bios.h
index 350d4e0f75a4..50d1659efe47 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -730,6 +730,7 @@ struct bdb_psr {
#define DEVICE_TYPE_INT_TV 0x1009
#define DEVICE_TYPE_HDMI 0x60D2
#define DEVICE_TYPE_DP 0x68C6
+#define DEVICE_TYPE_DP_DUAL_MODE 0x60D6
#define DEVICE_TYPE_eDP 0x78C6
#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15)
@@ -764,6 +765,8 @@ struct bdb_psr {
DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
DEVICE_TYPE_ANALOG_OUTPUT)
+#define DEVICE_TYPE_DP_DUAL_MODE_BITS ~DEVICE_TYPE_NOT_HDMI_OUTPUT
+
/* define the DVO port for HDMI output type */
#define DVO_B 1
#define DVO_C 2
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index cbc06596659a..f3edacf517ac 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5104,6 +5104,34 @@ bool intel_dp_is_edp(struct drm_device *dev, enum port
port)
return false;
}
+bool intel_dp_is_dual_mode(struct drm_i915_private *dev_priv, enum port port)
+{
+ const union child_device_config *p_child;
+ int i;
+ static const short port_mapping[] = {
+ [PORT_B] = DVO_PORT_DPB,
+ [PORT_C] = DVO_PORT_DPC,
+ [PORT_D] = DVO_PORT_DPD,
+ [PORT_E] = DVO_PORT_DPE,
+ };
+
+ if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
+ return false;
+
+ if (!dev_priv->vbt.child_dev_num)
+ return false;
+
+ for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
+ p_child = &dev_priv->vbt.child_dev[i];
+
+ if (p_child->common.dvo_port == port_mapping[port] &&
+ (p_child->common.device_type &
DEVICE_TYPE_DP_DUAL_MODE_BITS) ==
+ (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
+ return true;
+ }
+ return false;
+}
+
void
intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector
*connector)
{
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 3ca29a181e64..c7d1ea4dbe42 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1248,6 +1248,7 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
bool intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config);
bool intel_dp_is_edp(struct drm_device *dev, enum port port);
+bool intel_dp_is_dual_mode(struct drm_i915_private *dev_priv, enum port port);
enum irqreturn intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port,
bool long_hpd);
void intel_edp_backlight_on(struct intel_dp *intel_dp);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
b/drivers/gpu/drm/i915/intel_hdmi.c
index 660a65f48fd8..1476f3afb7e2 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1390,14 +1390,33 @@ intel_hdmi_unset_edid(struct drm_connector *connector)
}
static void
-intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector)
+intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
+ enum port port = hdmi_to_dig_port(hdmi)->port;
struct i2c_adapter *adapter =
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
+ /*
+ * Type 1 DVI adaptors are not required to implement any
+ * registers, so we can't always detect their presence.
+ * Ideally we should be able to check the state of the
+ * CONFIG1 pin, but no such luck on our hardware.
+ *
+ * The only method left to us is to check the VBT to see
+ * if the port is a dual mode capable DP port. But let's
+ * only do that when we sucesfully read the EDID, to avoid
+ * confusing log messages about DP dual mode adaptors when
+ * there's nothing connected to the port.
+ */
+ if (type == DRM_DP_DUAL_MODE_NONE && has_edid &&
+ intel_dp_is_dual_mode(dev_priv, port)) {
+ DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on
VBT\n");
+ type = DRM_DP_DUAL_MODE_TYPE1_DVI;
+ }
+
if (type == DRM_DP_DUAL_MODE_NONE)
return;
@@ -1441,7 +1460,7 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool
force)
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
- intel_hdmi_dp_dual_mode_detect(connector);
+ intel_hdmi_dp_dual_mode_detect(connector, edid != NULL);
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
}
--
2.4.10
