The MDP5 plane's atomic_check ops doesn't perform clipping tests.
This didn't hurt us much in the past, but clipping becomes important
with cursor planes.

Use drm_plane_helper_check_state, the way rockchip/intel/mtk drivers
already do. Clipping requires knowledge of the crtc width and height.
This requires us to call drm_atomic_helper_check_modeset before
drm_atomic_helper_check_planes in the driver's atomic_check op,
because check_modetest will populate the mode for the crtc, needed
to populate the clip rectangle.

We also replace the plane_enabled(state) local helper with
state->visible, since they both represent the same thing (i.e, whether
state->fb and state->crtc are non-NULL or not).

One issue with the existing code is that we don't have a way to disable
the plane when it's completely clipped out. Until there isn't an update
on the crtc (which would de-stage the plane), we would still see the
plane in its last 'visible' configuration.

Signed-off-by: Archit Taneja <architt at codeaurora.org>
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 59 +++++++++++++++++++++++--------
 drivers/gpu/drm/msm/msm_atomic.c          | 21 +++++++----
 2 files changed, 60 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c 
b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
index 72a9f98..929e58c 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
@@ -29,10 +29,7 @@ struct mdp5_plane {

 static int mdp5_plane_mode_set(struct drm_plane *plane,
                struct drm_crtc *crtc, struct drm_framebuffer *fb,
-               int crtc_x, int crtc_y,
-               unsigned int crtc_w, unsigned int crtc_h,
-               uint32_t src_x, uint32_t src_y,
-               uint32_t src_w, uint32_t src_h);
+               struct drm_rect *src, struct drm_rect *dest);

 static void set_scanout_locked(struct drm_plane *plane,
                struct drm_framebuffer *fb);
@@ -275,6 +272,7 @@ static void mdp5_plane_cleanup_fb(struct drm_plane *plane,
        msm_framebuffer_cleanup(fb, mdp5_kms->id);
 }

+#define FRAC_16_16(mult, div)    (((mult) << 16) / (div))
 static int mdp5_plane_atomic_check(struct drm_plane *plane,
                struct drm_plane_state *state)
 {
@@ -283,11 +281,20 @@ static int mdp5_plane_atomic_check(struct drm_plane 
*plane,
        struct mdp5_cfg *config = mdp5_cfg_get_config(get_kms(plane)->cfg);
        bool new_hwpipe = false;
        uint32_t max_width, max_height;
+       struct drm_crtc *crtc;
+       struct drm_crtc_state *crtc_state;
+       struct drm_rect clip;
+       int min_scale, max_scale;
        uint32_t caps = 0;
+       int ret;

        DBG("%s: check (%d -> %d)", plane->name,
                        plane_enabled(old_state), plane_enabled(state));

+       crtc = state->crtc ? state->crtc : plane->state->crtc;
+       if (!crtc)
+               return 0;
+
        /* We don't allow faster-than-vblank updates.. if we did add this
         * some day, we would need to disallow in cases where hwpipe
         * changes
@@ -306,7 +313,23 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane,
                return -ERANGE;
        }

-       if (plane_enabled(state)) {
+       crtc_state = drm_atomic_get_existing_crtc_state(state->state, crtc);
+       if (WARN_ON(!crtc_state))
+               return -EINVAL;
+
+       clip.x1 = 0;
+       clip.y1 = 0;
+       clip.x2 = crtc_state->adjusted_mode.hdisplay;
+       clip.y2 = crtc_state->adjusted_mode.vdisplay;
+       min_scale = FRAC_16_16(1, 8);
+       max_scale = FRAC_16_16(8, 1);
+
+       ret = drm_plane_helper_check_state(state, &clip, min_scale,
+                                          max_scale, true, true);
+       if (ret)
+               return ret;
+
+       if (state->visible) {
                unsigned int rotation;
                const struct mdp_format *format;
                struct mdp5_kms *mdp5_kms = get_kms(plane);
@@ -376,15 +399,12 @@ static void mdp5_plane_atomic_update(struct drm_plane 
*plane,

        mdp5_state->pending = true;

-       if (plane_enabled(state)) {
+       if (state->visible) {
                int ret;

                ret = mdp5_plane_mode_set(plane,
                                state->crtc, state->fb,
-                               state->crtc_x, state->crtc_y,
-                               state->crtc_w, state->crtc_h,
-                               state->src_x,  state->src_y,
-                               state->src_w, state->src_h);
+                               &state->src, &state->dst);
                /* atomic_check should have ensured that this doesn't fail */
                WARN_ON(ret < 0);
        }
@@ -677,10 +697,7 @@ static void mdp5_write_pixel_ext(struct mdp5_kms 
*mdp5_kms, enum mdp5_pipe pipe,

 static int mdp5_plane_mode_set(struct drm_plane *plane,
                struct drm_crtc *crtc, struct drm_framebuffer *fb,
-               int crtc_x, int crtc_y,
-               unsigned int crtc_w, unsigned int crtc_h,
-               uint32_t src_x, uint32_t src_y,
-               uint32_t src_w, uint32_t src_h)
+               struct drm_rect *src, struct drm_rect *dest)
 {
        struct drm_plane_state *pstate = plane->state;
        struct mdp5_hw_pipe *hwpipe = to_mdp5_plane_state(pstate)->hwpipe;
@@ -696,6 +713,10 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
        uint32_t pix_format;
        unsigned int rotation;
        bool vflip, hflip;
+       int crtc_x, crtc_y;
+       unsigned int crtc_w, crtc_h;
+       uint32_t src_x, src_y;
+       uint32_t src_w, src_h;
        unsigned long flags;
        int ret;

@@ -708,6 +729,16 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
        format = to_mdp_format(msm_framebuffer_format(fb));
        pix_format = format->base.pixel_format;

+       src_x = src->x1;
+       src_y = src->y1;
+       src_w = drm_rect_width(src);
+       src_h = drm_rect_height(src);
+
+       crtc_x = dest->x1;
+       crtc_y = dest->y1;
+       crtc_w = drm_rect_width(dest);
+       crtc_h = drm_rect_height(dest);
+
        /* src values are in Q16 fixed point, convert to integer: */
        src_x = src_x >> 16;
        src_y = src_y >> 16;
diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
index 30b5d23..6924fa2 100644
--- a/drivers/gpu/drm/msm/msm_atomic.c
+++ b/drivers/gpu/drm/msm/msm_atomic.c
@@ -151,20 +151,29 @@ static void commit_worker(struct work_struct *work)
        complete_commit(container_of(work, struct msm_commit, work), true);
 }

+/*
+ * this func is identical to the drm_atomic_helper_check, but we keep this
+ * because we might eventually need to have a more finegrained check
+ * sequence without using the atomic helpers.
+ *
+ * In the past, we first called drm_atomic_helper_check_planes, and then
+ * drm_atomic_helper_check_modeset. We needed this because the MDP5 plane's
+ * ->atomic_check could update ->mode_changed for pixel format changes.
+ * This, however isn't needed now because if there is a pixel format change,
+ * we just assign a new hwpipe for it with a new SMP allocation. We might
+ * eventually hit a condition where we would need to do a full modeset if
+ * we run out of planes. There, we'd probably need to set mode_changed.
+ */
 int msm_atomic_check(struct drm_device *dev,
                     struct drm_atomic_state *state)
 {
        int ret;

-       /*
-        * msm ->atomic_check can update ->mode_changed for pixel format
-        * changes, hence must be run before we check the modeset changes.
-        */
-       ret = drm_atomic_helper_check_planes(dev, state);
+       ret = drm_atomic_helper_check_modeset(dev, state);
        if (ret)
                return ret;

-       ret = drm_atomic_helper_check_modeset(dev, state);
+       ret = drm_atomic_helper_check_planes(dev, state);
        if (ret)
                return ret;

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

Reply via email to