Hi Laurent,
On 12/03/2016 07:16 PM, Laurent Pinchart wrote:
> Hi Fabio,
>
> On Friday 25 Nov 2016 13:29:37 Fabio Estevam wrote:
>> On Fri, Nov 25, 2016 at 1:22 PM, Laurent Pinchart wrote:
>>>> I got the clock name from I.MX6Q TRM, I also checked the name again
>>>> with Rockchip IC design team now, hope to get some new information soon.
>>>
>>> Thank you. While at it, could you ask them which version of the DW HDMI IP
>>> used in the SoC ?
>>
>> DW HDMI IP used in Rockchip is:
>> dwhdmi-rockchip ff980000.hdmi: Detected HDMI controller 0x20:0xa:0xa0:0xc1
>>
>> as shown at
>> https://storage.kernelci.org/mainline/v4.9-rc6-157-g16ae16c6e561/arm-multi_
>> v7_defconfig/lab-collabora/boot-rk3288-rock2-square_rootfs:nfs.html
>>
>> DW HDMI IP used on mx6q is:
>> dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
>
> Would you be able to print the value of the CONFIG[0-3]_ID registers as well ?
> I'm also interested in the same information for RK3288, as well as for IMX6DL.
>
i.MX6Q i.MX6DL
DESIGN_ID 0x13 0x13
REVISION_ID 0x0a 0x1a <--- the only difference
PRODUCT_ID0 0xa0 0xa0
PRODUCT_ID1 0xc1 0xc1
CONFIG0_ID 0x8f 0x8f
CONFIG1_ID 0x01 0x01
CONFIG2_ID 0xf2 0xf2 <--- HDMI 3D TX PHY
CONFIG3_ID 0x02 0x02
I'm not sure, if i.MX6D and MX6S have the same DW HDMI IP as on i.MX6Q
and i.MXDL respectively, and I don't have i.MX6DP or i.MX6QP powered board
on hand to dump the registers.
--
With best wishes,
Vladimir
