On 04/08/16 23:36, Peter Senna Tschudin wrote:
> Devicetree bindings documentation for the GE B850v3 LVDS/DP++
> display bridge.
>
> Cc: Javier Martinez Canillas <javier at dowhile0.org>
> Cc: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> Cc: Philipp Zabel <p.zabel at pengutronix.de>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Signed-off-by: Peter Senna Tschudin <peter.senna at collabora.com>
Acked-by: Martyn Welch <martyn.welch at collabora.co.uk>
> ---
> Changes from V3:
> - 2/4 instead of 3/5
>
> Unchanged from V2
>
> Changes from V1:
> - Replaced '_' by '-' in node names or compatible strings
> - Added missing @73 to the example
>
> .../devicetree/bindings/ge/b850v3-lvds-dp.txt | 37
> ++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
>
> diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
> b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
> new file mode 100644
> index 0000000..f05c3e9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
> @@ -0,0 +1,37 @@
> +Driver for GE B850v3 LVDS/DP++ display bridge
> +
> +Required properties:
> + - compatible : should be "ge,b850v3-lvds-dp".
> + - reg : should contain the address used to ack the interrupts.
> + - interrupt-parent : phandle of the interrupt controller that services
> + interrupts to the device
> + - interrupts : one interrupt should be described here, as in
> + <0 IRQ_TYPE_LEVEL_HIGH>.
> + - edid-reg : should contain the address used to read edid information
> + - port : should describe the video signal connection between the host
> + and the bridge.
> +
> +Example:
> +
> +&mux2_i2c2 {
> + status = "okay";
> + clock-frequency = <100000>;
> +
> + b850v3-lvds-dp-bridge at 73 {
> + compatible = "ge,b850v3-lvds-dp";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0x73>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> + edid-reg = <0x72>;
> +
> + port {
> + b850v3_dp_bridge_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> +};
>
