On Tue, 02 Aug 2016, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Tue, Aug 02, 2016 at 06:48:47PM +0800, Baole Ni wrote:
>> I find that the developers often just specified the numeric value
>> when calling a macro which is defined with a parameter for access permission.
>> As we know, these numeric value for access permission have had the
>> corresponding macro,
>> and that using macro can improve the robustness and readability of the code,
>> thus, I suggest replacing the numeric parameter with the macro.
>>
>> Signed-off-by: Chuansheng Liu <chuansheng.liu at intel.com>
>> Signed-off-by: Baole Ni <baolex.ni at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_params.c | 64
>> +++++++++++++++++++-------------------
>> 1 file changed, 32 insertions(+), 32 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_params.c
>> b/drivers/gpu/drm/i915/i915_params.c
>> index 1779f02..7184e06 100644
>> --- a/drivers/gpu/drm/i915/i915_params.c
>> +++ b/drivers/gpu/drm/i915/i915_params.c
>> @@ -60,22 +60,22 @@ struct i915_params i915 __read_mostly = {
>> .inject_load_failure = 0,
>> };
>>
>> -module_param_named(modeset, i915.modeset, int, 0400);
>> +module_param_named(modeset, i915.modeset, int, S_IRUSR);
>
> At least I can't read those macros. Octal is much clearer IMO.
Besides I think we should consider making most if not all of these
parameters group/other readable. Which would then potentially become
S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH instead of just 0644.
BR,
Jani.
>
>> MODULE_PARM_DESC(modeset,
>> "Use kernel modesetting [KMS] (0=disable, "
>> "1=on, -1=force vga console preference [default])");
>>
>> -module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int,
>> 0600);
>> +module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int,
>> S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(panel_ignore_lid,
>> "Override lid status (0=autodetect, 1=autodetect disabled [default], "
>> "-1=force lid closed, -2=force lid open)");
>>
>> -module_param_named_unsafe(semaphores, i915.semaphores, int, 0400);
>> +module_param_named_unsafe(semaphores, i915.semaphores, int, S_IRUSR);
>> MODULE_PARM_DESC(semaphores,
>> "Use semaphores for inter-ring sync "
>> "(default: -1 (use per-chip defaults))");
>>
>> -module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400);
>> +module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, S_IRUSR);
>> MODULE_PARM_DESC(enable_rc6,
>> "Enable power-saving render C-state 6. "
>> "Different stages can be selected via bitmask values "
>> @@ -83,82 +83,82 @@ MODULE_PARM_DESC(enable_rc6,
>> "For example, 3 would enable rc6 and deep rc6, and 7 would enable
>> everything. "
>> "default: -1 (use per-chip default)");
>>
>> -module_param_named_unsafe(enable_dc, i915.enable_dc, int, 0400);
>> +module_param_named_unsafe(enable_dc, i915.enable_dc, int, S_IRUSR);
>> MODULE_PARM_DESC(enable_dc,
>> "Enable power-saving display C-states. "
>> "(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)");
>>
>> -module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);
>> +module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, S_IRUSR |
>> S_IWUSR);
>> MODULE_PARM_DESC(enable_fbc,
>> "Enable frame buffer compression for power savings "
>> "(default: -1 (use per-chip default))");
>>
>> -module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int,
>> 0400);
>> +module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int,
>> S_IRUSR);
>> MODULE_PARM_DESC(lvds_channel_mode,
>> "Specify LVDS channel mode "
>> "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
>>
>> -module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
>> +module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, S_IRUSR |
>> S_IWUSR);
>> MODULE_PARM_DESC(lvds_use_ssc,
>> "Use Spread Spectrum Clock with panels [LVDS/eDP] "
>> "(default: auto from VBT)");
>>
>> -module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type,
>> int, 0400);
>> +module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type,
>> int, S_IRUSR);
>> MODULE_PARM_DESC(vbt_sdvo_panel_type,
>> "Override/Ignore selection of SDVO panel mode in the VBT "
>> "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
>>
>> -module_param_named_unsafe(reset, i915.reset, bool, 0600);
>> +module_param_named_unsafe(reset, i915.reset, bool, S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
>>
>> -module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool,
>> 0644);
>> +module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool,
>> S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
>> MODULE_PARM_DESC(enable_hangcheck,
>> "Periodically check GPU activity for detecting hangs. "
>> "WARNING: Disabling this can cause system wide hangs. "
>> "(default: true)");
>>
>> -module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400);
>> +module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, S_IRUSR);
>> MODULE_PARM_DESC(enable_ppgtt,
>> "Override PPGTT usage. "
>> "(-1=auto [default], 0=disabled, 1=aliasing, 2=full, 3=full with
>> extended address space)");
>>
>> -module_param_named_unsafe(enable_execlists, i915.enable_execlists, int,
>> 0400);
>> +module_param_named_unsafe(enable_execlists, i915.enable_execlists, int,
>> S_IRUSR);
>> MODULE_PARM_DESC(enable_execlists,
>> "Override execlists usage. "
>> "(-1=auto [default], 0=disabled, 1=enabled)");
>>
>> -module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
>> +module_param_named_unsafe(enable_psr, i915.enable_psr, int, S_IRUSR |
>> S_IWUSR);
>> MODULE_PARM_DESC(enable_psr, "Enable PSR "
>> "(0=disabled, 1=enabled - link mode chosen per-platform,
>> 2=force link-standby mode, 3=force link-off mode) "
>> "Default: -1 (use per-chip default)");
>>
>> -module_param_named_unsafe(preliminary_hw_support,
>> i915.preliminary_hw_support, int, 0400);
>> +module_param_named_unsafe(preliminary_hw_support,
>> i915.preliminary_hw_support, int, S_IRUSR);
>> MODULE_PARM_DESC(preliminary_hw_support,
>> "Enable preliminary hardware support.");
>>
>> -module_param_named_unsafe(disable_power_well, i915.disable_power_well, int,
>> 0400);
>> +module_param_named_unsafe(disable_power_well, i915.disable_power_well, int,
>> S_IRUSR);
>> MODULE_PARM_DESC(disable_power_well,
>> "Disable display power wells when possible "
>> "(-1=auto [default], 0=power wells always on, 1=power wells disabled
>> when possible)");
>>
>> -module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
>> +module_param_named_unsafe(enable_ips, i915.enable_ips, int, S_IRUSR |
>> S_IWUSR);
>> MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
>>
>> -module_param_named(fastboot, i915.fastboot, bool, 0600);
>> +module_param_named(fastboot, i915.fastboot, bool, S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(fastboot,
>> "Try to skip unnecessary mode sets at boot time (default: false)");
>>
>> -module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool,
>> 0600);
>> +module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool,
>> S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(prefault_disable,
>> "Disable page prefaulting for pread/pwrite/reloc (default:false). "
>> "For developers only.");
>>
>> -module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool,
>> 0600);
>> +module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool,
>> S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(load_detect_test,
>> "Force-enable the VGA load detect code for testing (default:false). "
>> "For developers only.");
>>
>> -module_param_named_unsafe(invert_brightness, i915.invert_brightness, int,
>> 0600);
>> +module_param_named_unsafe(invert_brightness, i915.invert_brightness, int,
>> S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(invert_brightness,
>> "Invert backlight brightness "
>> "(-1 force normal, 0 machine defaults, 1 force inversion), please "
>> @@ -166,47 +166,47 @@ MODULE_PARM_DESC(invert_brightness,
>> "to dri-devel at lists.freedesktop.org, if your machine needs it. "
>> "It will then be included in an upcoming module version.");
>>
>> -module_param_named(disable_display, i915.disable_display, bool, 0400);
>> +module_param_named(disable_display, i915.disable_display, bool, S_IRUSR);
>> MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
>>
>> -module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int,
>> 0600);
>> +module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int,
>> S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(enable_cmd_parser,
>> "Enable command parsing (1=enabled [default], 0=disabled)");
>>
>> -module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
>> +module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, S_IRUSR |
>> S_IWUSR);
>> MODULE_PARM_DESC(use_mmio_flip,
>> "use MMIO flips (-1=never, 0=driver discretion [default],
>> 1=always)");
>>
>> -module_param_named(mmio_debug, i915.mmio_debug, int, 0600);
>> +module_param_named(mmio_debug, i915.mmio_debug, int, S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(mmio_debug,
>> "Enable the MMIO debug code for the first N failures (default: off). "
>> "This may negatively affect performance.");
>>
>> -module_param_named(verbose_state_checks, i915.verbose_state_checks, bool,
>> 0600);
>> +module_param_named(verbose_state_checks, i915.verbose_state_checks, bool,
>> S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(verbose_state_checks,
>> "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state
>> conditions.");
>>
>> -module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool,
>> 0600);
>> +module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool,
>> S_IRUSR | S_IWUSR);
>> MODULE_PARM_DESC(nuclear_pageflip,
>> "Force atomic modeset functionality; asynchronous mode is not
>> yet supported. (default: false).");
>>
>> /* WA to get away with the default setting in VBT for early platforms.Will
>> be removed */
>> -module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400);
>> +module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, S_IRUSR);
>> MODULE_PARM_DESC(edp_vswing,
>> "Ignore/Override vswing pre-emph table selection from VBT "
>> "(0=use value from vbt [default], 1=low power swing(200mV),"
>> "2=default swing(400mV))");
>>
>> -module_param_named_unsafe(enable_guc_submission,
>> i915.enable_guc_submission, bool, 0400);
>> +module_param_named_unsafe(enable_guc_submission,
>> i915.enable_guc_submission, bool, S_IRUSR);
>> MODULE_PARM_DESC(enable_guc_submission, "Enable GuC submission
>> (default:false)");
>>
>> -module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
>> +module_param_named(guc_log_level, i915.guc_log_level, int, S_IRUSR);
>> MODULE_PARM_DESC(guc_log_level,
>> "GuC firmware logging level (-1:disabled (default), 0-3:enabled)");
>>
>> -module_param_named_unsafe(enable_dp_mst, i915.enable_dp_mst, bool, 0600);
>> +module_param_named_unsafe(enable_dp_mst, i915.enable_dp_mst, bool, S_IRUSR
>> | S_IWUSR);
>> MODULE_PARM_DESC(enable_dp_mst,
>> "Enable multi-stream transport (MST) for new DisplayPort sinks.
>> (default: true)");
>> -module_param_named_unsafe(inject_load_failure, i915.inject_load_failure,
>> uint, 0400);
>> +module_param_named_unsafe(inject_load_failure, i915.inject_load_failure,
>> uint, S_IRUSR);
>> MODULE_PARM_DESC(inject_load_failure,
>> "Force an error after a number of failure check points (0:disabled
>> (default), N:force failure at the Nth failure check point)");
>> --
>> 2.9.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
