Hi Sergei, Thank you for the patch.
On Saturday 23 Apr 2016 01:56:07 Sergei Shtylyov wrote: > The TCNE2 bit of the DEFR6 register was renamed to TCNE1 in the R-Car gen2 > manuals -- which makes more sense as that bit controls whether DU1, not > DU2 is connected to TCON. > > While at it, add the TCNE0 bit which controls whether DU0 is connected to > TCON. > > Based on the large patch by Andrey Gusakov > <andrey.gusakov at cogentembedded.com>. > > Signed-off-by: Andrey Gusakov <andrey.gusakov at cogentembedded.com> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com> and applied to my tree. > --- > The patch is against David Airlie's 'linux.git' repo's 'drm-next' branch. > > drivers/gpu/drm/rcar-du/rcar_du_regs.h | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > Index: linux/drivers/gpu/drm/rcar-du/rcar_du_regs.h > =================================================================== > --- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_regs.h > +++ linux/drivers/gpu/drm/rcar-du/rcar_du_regs.h > @@ -195,9 +195,10 @@ > #define DEFR6_ODPM12_DISP (2 << 8) > #define DEFR6_ODPM12_CDE (3 << 8) > #define DEFR6_ODPM12_MASK (3 << 8) > -#define DEFR6_TCNE2 (1 << 6) > +#define DEFR6_TCNE1 (1 << 6) > +#define DEFR6_TCNE0 (1 << 4) > #define DEFR6_MLOS1 (1 << 2) > -#define DEFR6_DEFAULT (DEFR6_CODE | DEFR6_TCNE2) > +#define DEFR6_DEFAULT (DEFR6_CODE | DEFR6_TCNE1) > > /* ------------------------------------------------------------------------ > * R8A7790-only Control Registers -- Regards, Laurent Pinchart
