From: Boris Brezillon <boris.brezil...@free-electrons.com>
All modes exposed by simple panels should be tagged as driver defined
modes.
Moreover, if a panel supports only one mode, this mode is obviously the
preferred one.
Doing this also fix a problem occurring when a 'video=' parameter is passed
on the kernel cmdline. In some cases the user provided mode is preferred
over the simple panel ones, which might result in unpredictable behavior.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Tested-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
drivers/gpu/drm/panel/panel-simple.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index ceb20486dacf..45b924ebed57 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -115,6 +115,10 @@ static int panel_simple_get_fixed_modes(struct
panel_simple *panel)
continue;
}
+ mode->type |= DRM_MODE_TYPE_DRIVER;
+ if (panel->desc->num_modes == 1)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
drm_display_mode_from_videomode(&vm, mode);
drm_mode_set_name(mode);
@@ -132,6 +136,10 @@ static int panel_simple_get_fixed_modes(struct
panel_simple *panel)
continue;
}
+ mode->type |= DRM_MODE_TYPE_DRIVER;
+ if (panel->desc->num_modes == 1)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
--
2.1.3
