https://bugs.freedesktop.org/show_bug.cgi?id=86320
--- Comment #14 from Morten Leikvoll <nerd at cyviz.com> --- I should warn that some displays does not seem to follow the displayport standard properly. I would recommend trying a different one, and if its related to some models, discuss what to do. I dont have an answer for that. I am working on a embedded displayport source here and find a Dell U2913 2560x1080 monitor (It has a STDP9320-BB "Athena" displayport sink, with unknown firmware) does not report a correct SINK_STATUS (DPCD register 0x00205, bit 0) wich the specification says it should do. Also its seem to lock the LINK_STATUS_UPDATED bit to 1 (in DPCD register 0x00204) But even if this is wrong, it still shows an image. Googling my symptom made me find this thread. Wether to skip this test is a good idea is up for discussion. For an home/office environment, its probably ok, but for an industrial environment it may not be ok. -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20151019/cdee5153/attachment.html>
