On 2015å¹´11æ12æ¥ 18:36, Liviu Dudau wrote:
> On Thu, Nov 12, 2015 at 04:32:33PM +0800, Mark yao wrote:
>> On 2015å¹´11æ10æ¥ 23:01, Liviu Dudau wrote:
>>
>> Hello,
>>
>> When booting my Juno board with the HDLCD driver that I have converted to
>> atomic operations I'm getting the following warning:
>>
>> ------------[ cut here ]------------
>> WARNING: at
>> /work/repositories/kernel/drivers/gpu/drm/drm_atomic_helper.c:674
>> Modules linked in: hdlcd(+) clk_scpi
>>
>> CPU: 3 PID: 1375 Comm: systemd-udevd Not tainted 4.3.0-next-20151109+ #5
>> Hardware name: ARM Juno development board (r0) (DT)
>> task: ffffffc974888b00 ti: ffffffc9755dc000 task.ti: ffffffc9755dc000
>> PC is at drm_atomic_helper_update_legacy_modeset_state+0x204/0x20c
>> LR is at drm_atomic_helper_commit_modeset_disables+0x1c0/0x394
>> pc : [<ffffffc0003e6d18>] lr : [<ffffffc0003e8214>] pstate: 20000145
>> sp : ffffffc9755df430
>> x29: ffffffc9755df430 x28: ffffffc975703600
>> x27: 0000000000000000 x26: ffffffc976253960
>> x25: ffffffc976254040 x24: ffffffc000819000
>> x23: ffffffc000689ea0 x22: ffffffc976251800
>> x21: ffffffc976251800 x20: 0000000000000000
>> x19: ffffffc9766b1f80 x18: 00000000715fe015
>> x17: 0000007fb4b855b0 x16: 0000000000000220
>> x15: 0000000000000001 x14: 0ffffffffffffffe
>> x13: 0000000000000008 x12: 0101010101010101
>> x11: ffffffc000964000 x10: ffffffc0009d2000
>> x9 : 0000000000000000 x8 : ffffffc97ff5f700
>> x7 : ffffffc97566cb80 x6 : ffffffc9766b1700
>> x5 : ffffffc975665100 x4 : 0000000000000000
>> x3 : ffffffc976253960 x2 : ffffffc97566cd00
>> x1 : ffffffc976253900 x0 : 0000000000000000
>>
>> ---[ end trace 9fe289f798e7178e ]---
>> Call trace:
>> [<ffffffc0003e6d18>]
>> drm_atomic_helper_update_legacy_modeset_state+0x204/0x20c
>> [<ffffffc0003e8214>] drm_atomic_helper_commit_modeset_disables+0x1c0/0x394
>> [<ffffffc0003e84c8>] drm_atomic_helper_commit+0xe0/0x150
>> [<ffffffc00040bcc0>] drm_atomic_commit+0x40/0x6c
>> [<ffffffc0003e92c0>] restore_fbdev_mode+0x294/0x2d4
>> [<ffffffc0003eb6ec>] drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x8c
>> [<ffffffc0003eb770>] drm_fb_helper_set_par+0x2c/0x58
>> [<ffffffc000378048>] fbcon_init+0x4d4/0x534
>> [<ffffffc0003b44f4>] visual_init+0xac/0x104
>> [<ffffffc0003b63f8>] do_bind_con_driver+0x16c/0x398
>> [<ffffffc0003b6968>] do_take_over_console+0xd8/0x1f4
>> [<ffffffc00037811c>] do_fbcon_takeover+0x74/0xf8
>> [<ffffffc00037c5cc>] fbcon_event_notify+0x8a4/0x8f8
>> [<ffffffc0000d19f0>] notifier_call_chain+0x4c/0x88
>> [<ffffffc0000d1d78>] __blocking_notifier_call_chain+0x44/0x74
>> [<ffffffc0000d1dbc>] blocking_notifier_call_chain+0x14/0x1c
>> [<ffffffc00037d614>] fb_notifier_call_chain+0x1c/0x24
>> [<ffffffc00037f8a8>] register_framebuffer+0x1c0/0x2ac
>> [<ffffffc0003eb9f8>] drm_fb_helper_initial_config+0x25c/0x3ec
>> [<ffffffc0003ec28c>] drm_fbdev_cma_init+0x98/0x134
>> [<ffffffbffc006780>] hdlcd_drm_bind+0x180/0x498 [hdlcd]
>> [<ffffffc0004158e0>] try_to_bring_up_master.part.5+0xd4/0x118
>> [<ffffffc0004159e8>] component_master_add_with_match+0xc4/0x148
>> [<ffffffc000415a7c>] component_master_add+0x10/0x18
>> [<ffffffbffc0065ec>] hdlcd_probe+0x14/0x28 [hdlcd]
>> [<ffffffc00041c504>] platform_drv_probe+0x54/0xc0
>> [<ffffffc00041a9b0>] driver_probe_device+0x1ec/0x2e8
>> [<ffffffc00041ab48>] __driver_attach+0x9c/0xa0
>> [<ffffffc000418bcc>] bus_for_each_dev+0x58/0x98
>> [<ffffffc00041a41c>] driver_attach+0x20/0x28
>> [<ffffffc00041a058>] bus_add_driver+0x1c8/0x22c
>> [<ffffffc00041b3d0>] driver_register+0x68/0x108
>> [<ffffffc00041c408>] __platform_driver_register+0x4c/0x54
>> [<ffffffbffc00b018>] hdlcd_init+0x18/0x30 [hdlcd]
>> [<ffffffc00008293c>] do_one_initcall+0x90/0x1a8
>> [<ffffffc0001424dc>] do_init_module+0x60/0x1c8
>> [<ffffffc00011d364>] load_module+0x1554/0x1c98
>> [<ffffffc00011dc64>] SyS_finit_module+0x7c/0x88
>> [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28
>>
>>
>> The line that triggers the warning is:
>>
>> 674: WARN_ON(!connector->encoder->crtc);
>>
>> As far as I can see the encoder->crtc value is being set to a non-NULL
>> value only
>> in two places:
>> - in drm_atomic_helper_update_legacy_modeset_state() after WARN_ON()
>> encoder->crtc = connector->state->crtc;
>> - in drm_crtc_helper_set_config(drm_mode_set *set):
>> encoder->crtc = new_crtc;
>>
>> Nothing in the call path from drm_atomic_commit() calls
>> crtc_funcs->set_config() or
>> drm_crtc_helper_set_config() directly, so the question is if this WARN()
>> is actually
>> valid.
>>
>> Call path from drm_atomic_commit:
>>
>> drm_atomic_helper_commit()
>> - drm_atomic_helper_prepare_planes()
>> - drm_atomic_helper_swap_state()
>> - drm_atomic_helper_commit_modeset_disables()
>> - disable_outputs()
>> - drm_atomic_helper_update_legacy_modeset_state()
>> - WARN_ON(!connector->encoder->crtc)
>>
>> Best regards,
>> Liviu
>>
>>
>> Hi Liviu
>> I solved this problem by following change, you can check if your
>> driver do the same things:
>> drivers/gpu/drm/bridge/dw_hdmi.c:
>> - hdmi->connector.encoder = encoder;
>> +// hdmi->connector.encoder = encoder;
>>
>> drm_mode_connector_attach_encoder(&hdmi->connector,
>> encoder);
>>
>> I found some other drivers set connector.encoder before
>> drm_mode_connector_attach_encoder, some are not.
>>
>> drm_mode_connector_attach_encoder already describe the link of
>> connector and encoder,
>> so I think "connector.encoder = encoder" is not needed, is that right?
> I'll have a look, thanks for pointing this. However, my setup uses the
> tda998x driver for encoder, so I will
> have to go look there rather than in my driver.
>
> Best regards,
> Liviu
>
>> Thanks.
>>
>> --
>> ï¼ark Yao
Hi Liviu
drivers/gpu/drm/i2c/tda998x_drv.c do the same things:
priv->connector.encoder = &priv->encoder;
drm_mode_connector_attach_encoder(&priv->connector, &priv->encoder);
I believe must be same problem.
Thanks.
--
ï¼ark Yao
