[PATCH] drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2

[Philipp Zabel]

This patch allows the IPU to divide the 27 MHz input clock from
the TVE by two to obtain the 13.5 MHz pixel clock needed for
NTSC/PAL SD modes.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 drivers/gpu/drm/imx/ipuv3-crtc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 35a3375..11a8d868 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -161,13 +161,16 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
                __func__, encoder_types);

        /*
-        * If we have DAC, TVDAC or LDB, then we need the IPU DI clock
-        * to be the same as the LDB DI clock.
+        * If we have DAC or LDB, then we need the IPU DI clock to be
+        * the same as the LDB DI clock. For TVDAC, derive the IPU DI
+        * clock from 27 MHz TVE_DI clock, but allow to divide it.
         */
        if (encoder_types & (BIT(DRM_MODE_ENCODER_DAC) |
                             BIT(DRM_MODE_ENCODER_TVDAC) |
                             BIT(DRM_MODE_ENCODER_LVDS)))
                sig_cfg.clkflags = IPU_DI_CLKMODE_SYNC | IPU_DI_CLKMODE_EXT;
+       else if (encoder_types & BIT(DRM_MODE_ENCODER_TVDAC))
+               sig_cfg.clkflags = IPU_DI_CLKMODE_EXT;
        else
                sig_cfg.clkflags = 0;

-- 
2.1.4