On 01/07/15 09:10, Jean-Francois Moine wrote:
> This patch permits the definition of the audio ports from the device tree.
>
> Signed-off-by: Jean-Francois Moine <moinejf at free.fr>
> ---
> .../devicetree/bindings/drm/i2c/tda998x.txt | 18 +++++++
> drivers/gpu/drm/i2c/tda998x_drv.c | 60
> ++++++++++++++++++----
> 2 files changed, 69 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> index e9e4bce..e50e7cd 100644
> --- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> +++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> @@ -17,6 +17,20 @@ Optional properties:
> - video-ports: 24 bits value which defines how the video controller
> output is wired to the TDA998x input - default: <0x230145>
>
> + - audio-ports: must contain one or two values selecting the source
> + in the audio port.
> + The source type is given by the corresponding entry in
> + the audio-port-names property.
I think that this entry might benefit from a little more explanation.
The value specified here selects which pins on the chip provide the
audio input doesn't it? In the outline datasheet that I have these are
listed in table 17:
Audio port Input configuration
S/PDIF I2S-bus
AP0 - WS (word select)
AP1 S/PDIF input I2S-bus channel 0
AP2 S/PDIF input I2S-bus channel 1
AP3[1] I2S-bus channel 2
AP4[1] I2S-bus channel 3
ACLK - SCK (I2S-bus clock)
[1] Depending on package.
Andrew
> +
> + - audio-port-names: must contain entries matching the entries in
> + the audio-ports property.
> + Each value may be "i2s" or "spdif", giving the type of
> + the audio source.
> +
> + - #sound-dai-cells: must be set to <1> for use with the simple-card.
> + The TDA998x audio CODEC always defines two DAIs.
> + The DAI 0 is the S/PDIF input and the DAI 1 is the I2S input.
> +
> Example:
>
> tda998x: hdmi-encoder {
> @@ -26,4 +40,8 @@ Example:
> interrupts = <27 2>; /* falling edge */
> pinctrl-0 = <&pmx_camera>;
> pinctrl-names = "default";
> +
> + audio-ports = <0x04>, <0x03>;
> + audio-port-names = "spdif", "i2s";
> + #sound-dai-cells = <1>;
> };
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c
> b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 70658af..9d9b072 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -20,6 +20,7 @@
> #include <linux/module.h>
> #include <linux/irq.h>
> #include <sound/asoundef.h>
> +#include <linux/platform_device.h>
>
> #include <drm/drmP.h>
> #include <drm/drm_crtc_helper.h>
> @@ -44,6 +45,8 @@ struct tda998x_priv {
> wait_queue_head_t wq_edid;
> volatile int wq_edid_wait;
> struct drm_encoder *encoder;
> +
> + u8 audio_ports[2];
> };
>
> #define to_tda998x_priv(x) ((struct tda998x_priv
> *)to_encoder_slave(x)->slave_priv)
> @@ -1254,12 +1257,16 @@ static int tda998x_create(struct i2c_client *client,
> struct tda998x_priv *priv)
> {
> struct device_node *np = client->dev.of_node;
> u32 video;
> - int rev_lo, rev_hi, ret;
> + int i, rev_lo, rev_hi, ret;
> + const char *p;
>
> priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3);
> priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
> priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5);
>
> + priv->params.audio_frame[1] = 1; /* channels - 1 */
> + priv->params.audio_sample_rate = 48000; /* 48kHz */
> +
> priv->current_page = 0xff;
> priv->hdmi = client;
> priv->cec = i2c_new_dummy(client->adapter, 0x34);
> @@ -1351,15 +1358,50 @@ static int tda998x_create(struct i2c_client *client,
> struct tda998x_priv *priv)
> /* enable EDID read irq: */
> reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
>
> - if (!np)
> - return 0; /* non-DT */
> + /* get the device tree parameters */
> + if (np) {
> +
> + /* optional video properties */
> + ret = of_property_read_u32(np, "video-ports", &video);
> + if (ret == 0) {
> + priv->vip_cntrl_0 = video >> 16;
> + priv->vip_cntrl_1 = video >> 8;
> + priv->vip_cntrl_2 = video;
> + }
> +
> + /* optional audio properties */
> + for (i = 0; i < 2; i++) {
> + u32 port;
>
> - /* get the optional video properties */
> - ret = of_property_read_u32(np, "video-ports", &video);
> - if (ret == 0) {
> - priv->vip_cntrl_0 = video >> 16;
> - priv->vip_cntrl_1 = video >> 8;
> - priv->vip_cntrl_2 = video;
> + ret = of_property_read_u32_index(np, "audio-ports", i,
> &port);
> + if (ret)
> + break;
> + ret = of_property_read_string_index(np,
> "audio-port-names",
> + i, &p);
> + if (ret) {
> + dev_err(&client->dev,
> + "missing audio-port-names[%d]\n", i);
> + break;
> + }
> + if (strcmp(p, "spdif") == 0) {
> + priv->audio_ports[0] = port;
> + } else if (strcmp(p, "i2s") == 0) {
> + priv->audio_ports[1] = port;
> + } else {
> + dev_err(&client->dev,
> + "bad audio-port-names '%s'\n", p);
> + break;
> + }
> + }
> + if (priv->audio_ports[0]) {
> + priv->params.audio_cfg = priv->audio_ports[0];
> + priv->params.audio_format = AFMT_SPDIF;
> + priv->params.audio_clk_cfg = 0;
> + } else {
> + priv->params.audio_cfg = priv->audio_ports[1];
> + priv->params.audio_format = AFMT_I2S;
> + priv->params.audio_clk_cfg = 1;
> + }
> }
>
> return 0;
>
