On Thu, Dec 03, 2015 at 11:14:11PM +0200, ville.syrjala at linux.intel.com
wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> There's some random mix of spaces and tabs used within the enum
> drm_mode_status definition. Fix it up to use just tabs.
>
> Cc: Adam Jackson <ajax at redhat.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Ok, this will conflict badly, ok if this doesn't go in and I do the
reformatting in my patch to kerneldoc drm_mode_status?
-Daniel
> ---
> include/drm/drm_modes.h | 78
> ++++++++++++++++++++++++-------------------------
> 1 file changed, 39 insertions(+), 39 deletions(-)
>
> diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
> index 71801229ce9d..256a1bbb125c 100644
> --- a/include/drm/drm_modes.h
> +++ b/include/drm/drm_modes.h
> @@ -36,45 +36,45 @@
> */
>
> enum drm_mode_status {
> - MODE_OK = 0, /* Mode OK */
> - MODE_HSYNC, /* hsync out of range */
> - MODE_VSYNC, /* vsync out of range */
> - MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
> - MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
> - MODE_BAD_WIDTH, /* requires an unsupported linepitch */
> - MODE_NOMODE, /* no mode with a matching name */
> - MODE_NO_INTERLACE, /* interlaced mode not supported */
> - MODE_NO_DBLESCAN, /* doublescan mode not supported */
> - MODE_NO_VSCAN, /* multiscan mode not supported */
> - MODE_MEM, /* insufficient video memory */
> - MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
> - MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
> - MODE_MEM_VIRT, /* insufficient video memory given virtual size */
> - MODE_NOCLOCK, /* no fixed clock available */
> - MODE_CLOCK_HIGH, /* clock required is too high */
> - MODE_CLOCK_LOW, /* clock required is too low */
> - MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
> - MODE_BAD_HVALUE, /* horizontal timing was out of range */
> - MODE_BAD_VVALUE, /* vertical timing was out of range */
> - MODE_BAD_VSCAN, /* VScan value out of range */
> - MODE_HSYNC_NARROW, /* horizontal sync too narrow */
> - MODE_HSYNC_WIDE, /* horizontal sync too wide */
> - MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
> - MODE_HBLANK_WIDE, /* horizontal blanking too wide */
> - MODE_VSYNC_NARROW, /* vertical sync too narrow */
> - MODE_VSYNC_WIDE, /* vertical sync too wide */
> - MODE_VBLANK_NARROW, /* vertical blanking too narrow */
> - MODE_VBLANK_WIDE, /* vertical blanking too wide */
> - MODE_PANEL, /* exceeds panel dimensions */
> - MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
> - MODE_ONE_WIDTH, /* only one width is supported */
> - MODE_ONE_HEIGHT, /* only one height is supported */
> - MODE_ONE_SIZE, /* only one resolution is supported */
> - MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
> - MODE_NO_STEREO, /* stereo modes not supported */
> - MODE_STALE = -3, /* mode has become stale */
> - MODE_BAD = -2, /* unspecified reason */
> - MODE_ERROR = -1 /* error condition */
> + MODE_OK = 0, /* Mode OK */
> + MODE_HSYNC, /* hsync out of range */
> + MODE_VSYNC, /* vsync out of range */
> + MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
> + MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
> + MODE_BAD_WIDTH, /* requires an unsupported linepitch */
> + MODE_NOMODE, /* no mode with a matching name */
> + MODE_NO_INTERLACE, /* interlaced mode not supported */
> + MODE_NO_DBLESCAN, /* doublescan mode not supported */
> + MODE_NO_VSCAN, /* multiscan mode not supported */
> + MODE_MEM, /* insufficient video memory */
> + MODE_VIRTUAL_X, /* mode width too large for specified virtual
> size */
> + MODE_VIRTUAL_Y, /* mode height too large for specified virtual
> size */
> + MODE_MEM_VIRT, /* insufficient video memory given virtual size
> */
> + MODE_NOCLOCK, /* no fixed clock available */
> + MODE_CLOCK_HIGH, /* clock required is too high */
> + MODE_CLOCK_LOW, /* clock required is too low */
> + MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
> + MODE_BAD_HVALUE, /* horizontal timing was out of range */
> + MODE_BAD_VVALUE, /* vertical timing was out of range */
> + MODE_BAD_VSCAN, /* VScan value out of range */
> + MODE_HSYNC_NARROW, /* horizontal sync too narrow */
> + MODE_HSYNC_WIDE, /* horizontal sync too wide */
> + MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
> + MODE_HBLANK_WIDE, /* horizontal blanking too wide */
> + MODE_VSYNC_NARROW, /* vertical sync too narrow */
> + MODE_VSYNC_WIDE, /* vertical sync too wide */
> + MODE_VBLANK_NARROW, /* vertical blanking too narrow */
> + MODE_VBLANK_WIDE, /* vertical blanking too wide */
> + MODE_PANEL, /* exceeds panel dimensions */
> + MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
> + MODE_ONE_WIDTH, /* only one width is supported */
> + MODE_ONE_HEIGHT, /* only one height is supported */
> + MODE_ONE_SIZE, /* only one resolution is supported */
> + MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
> + MODE_NO_STEREO, /* stereo modes not supported */
> + MODE_STALE = -3, /* mode has become stale */
> + MODE_BAD = -2, /* unspecified reason */
> + MODE_ERROR = -1, /* error condition */
> };
>
> #define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
> --
> 2.4.10
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
