Hello Thierry, Am 13.08.2015 um 14:59 schrieb Thierry Reding: > On Tue, Jun 09, 2015 at 07:51:22AM +0200, Heiko Schocher wrote: >> Add support for LG LG4573 480x800 4,3" panel. the LG4573 >> is used on the LG LCD LB043WV2-SD01, an industrial 4.3" TFT >> panel with SPI control interface. >> >> Signed-off-by: Heiko Schocher <hs at denx.de> >> >> --- >> >> Changes in v2: >> - add comments from Thierry Reding: >> - fix some spelling issues >> - remove "power-on-delay" >> - remove display timings usage from DT, instead specify the >> timing in the driver. >> - change config symbol to DRM_PANEL_LG_LG4573 >> - change filename to panel-lg-lg4573.c >> - get rid of power_on_delay >> - use cpu_to_be16() >> - rework lg4573_spi_write_u16_array() >> - introduce lg4573_spi_write_dcs() >> - reworked error reporting >> >> .../devicetree/bindings/panel/lg,lg4573.txt | 19 + >> drivers/gpu/drm/panel/Kconfig | 8 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-lg-lg4573.c | 382 >> +++++++++++++++++++++ >> 4 files changed, 410 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/panel/lg,lg4573.txt >> create mode 100644 drivers/gpu/drm/panel/panel-lg-lg4573.c > > There were a couple of review comments that you missed, but I've
Hups ... It seems I missed them :-( > addressed them while applying. Might be good to give it[0] a spin just > to make sure I didn't accidentally break anything. Uh, thank you! Just tested it on the aristainetos2 board, works fine. bye, Heiko > > Thierry > > [0]: git://anongit.freedesktop.org/tegra/linux#drm/panel/for-next > -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
