From: Gustavo Padovan <gustavo.pado...@collabora.co.uk>

Fold intel_pipe_set_base() in the update primary plane path merging
pieces of code that are common to both paths.

Basically the the pin/unpin procedures are the same for both paths
and some checks can also be shared (some of the were moved to the
check() stage)

v2: take Ville's comments:
        - remove unnecessary plane check
        - move mutex lock to inside the conditional
        - make the pin fail message a debug one
        - add a fixme for the fastboot hack
        - call intel_frontbuffer_flip() after FBC update

v3: take more Ville's comments:
        - fold update code under if (intel_crtc->active), and do the
        visible/!visible split inside.
        - check ret inside the same conditional we assign it

v4: don't use intel_enable_primary_hw_plane(), the primary_enabled
check inside will break page flips

Suggested-by: Ville Syrj?l? <ville.syrjala at linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
---
 drivers/gpu/drm/i915/intel_display.c | 141 +++++++++++++++++++++--------------
 1 file changed, 84 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c 
b/drivers/gpu/drm/i915/intel_display.c
index 5b05ddb..1fd9b70 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11792,12 +11792,23 @@ intel_check_primary_plane(struct drm_plane *plane,
        struct drm_rect *dest = &state->dst;
        struct drm_rect *src = &state->src;
        const struct drm_rect *clip = &state->clip;
+       int ret;

-       return drm_plane_helper_check_update(plane, crtc, fb,
+       ret = drm_plane_helper_check_update(plane, crtc, fb,
                                            src, dest, clip,
                                            DRM_PLANE_HELPER_NO_SCALING,
                                            DRM_PLANE_HELPER_NO_SCALING,
                                            false, true, &state->visible);
+       if (ret)
+               return ret;
+
+       /* no fb bound */
+       if (state->visible && !fb) {
+               DRM_ERROR("No FB bound\n");
+               return -EINVAL;
+       }
+
+       return 0;
 }

 static int
@@ -11809,6 +11820,8 @@ intel_commit_primary_plane(struct drm_plane *plane,
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+       enum pipe pipe = intel_crtc->pipe;
+       struct drm_framebuffer *old_fb = plane->fb;
        struct drm_i915_gem_object *obj = intel_fb_obj(fb);
        struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
        struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -11817,67 +11830,28 @@ intel_commit_primary_plane(struct drm_plane *plane,

        intel_crtc_wait_for_pending_flips(crtc);

-       /*
-        * If clipping results in a non-visible primary plane, we'll disable
-        * the primary plane.  Note that this is a bit different than what
-        * happens if userspace explicitly disables the plane by passing fb=0
-        * because plane->fb still gets set and pinned.
-        */
-       if (!state->visible) {
-               mutex_lock(&dev->struct_mutex);
-
-               /*
-                * Try to pin the new fb first so that we can bail out if we
-                * fail.
-                */
-               if (plane->fb != fb) {
-                       ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
-                       if (ret) {
-                               mutex_unlock(&dev->struct_mutex);
-                               return ret;
-                       }
-               }
-
-               i915_gem_track_fb(old_obj, obj,
-                                 INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe));
-
-               if (intel_crtc->primary_enabled)
-                       intel_disable_primary_hw_plane(plane, crtc);
-
-
-               if (plane->fb != fb)
-                       if (plane->fb)
-                               intel_unpin_fb_obj(old_obj);
+       if (intel_crtc_has_pending_flip(crtc)) {
+               DRM_ERROR("pipe is still busy with an old pageflip\n");
+               return -EBUSY;
+       }

+       if (plane->fb != fb) {
+               mutex_lock(&dev->struct_mutex);
+               ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
+               if (ret == 0)
+                       i915_gem_track_fb(old_obj, obj,
+                                         INTEL_FRONTBUFFER_PRIMARY(pipe));
                mutex_unlock(&dev->struct_mutex);
-
-       } else {
-               if (intel_crtc && intel_crtc->active &&
-                   intel_crtc->primary_enabled) {
-                       /*
-                        * FBC does not work on some platforms for rotated
-                        * planes, so disable it when rotation is not 0 and
-                        * update it when rotation is set back to 0.
-                        *
-                        * FIXME: This is redundant with the fbc update done in
-                        * the primary plane enable function except that that
-                        * one is done too late. We eventually need to unify
-                        * this.
-                        */
-                       if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
-                           dev_priv->fbc.plane == intel_crtc->plane &&
-                           intel_plane->rotation != BIT(DRM_ROTATE_0)) {
-                               intel_disable_fbc(dev);
-                       }
-               }
-               ret = intel_pipe_set_base(crtc, src->x1, src->y1, fb);
-               if (ret)
+               if (ret != 0) {
+                       DRM_DEBUG_KMS("pin & fence failed\n");
                        return ret;
-
-               if (!intel_crtc->primary_enabled)
-                       intel_enable_primary_hw_plane(plane, crtc);
+               }
        }

+       crtc->primary->fb = fb;
+       crtc->x = src->x1;
+       crtc->y = src->y1;
+
        intel_plane->crtc_x = state->orig_dst.x1;
        intel_plane->crtc_y = state->orig_dst.y1;
        intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
@@ -11888,6 +11862,59 @@ intel_commit_primary_plane(struct drm_plane *plane,
        intel_plane->src_h = drm_rect_height(&state->orig_src);
        intel_plane->obj = obj;

+       if (intel_crtc->active) {
+               /*
+                * FBC does not work on some platforms for rotated
+                * planes, so disable it when rotation is not 0 and
+                * update it when rotation is set back to 0.
+                *
+                * FIXME: This is redundant with the fbc update done in
+                * the primary plane enable function except that that
+                * one is done too late. We eventually need to unify
+                * this.
+                */
+               if (intel_crtc->primary_enabled &&
+                   INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+                   dev_priv->fbc.plane == intel_crtc->plane &&
+                   intel_plane->rotation != BIT(DRM_ROTATE_0)) {
+                       intel_disable_fbc(dev);
+               }
+
+               if (state->visible) {
+                       /* FIXME: kill this fastboot hack */
+                       intel_update_pipe_size(intel_crtc);
+
+                       dev_priv->display.update_primary_plane(crtc, plane->fb,
+                                       crtc->x, crtc->y);
+               } else {
+                       /*
+                        * If clipping results in a non-visible primary plane,
+                        * we'll disable the primary plane.  Note that this is
+                        * a bit different than what happens if userspace
+                        * explicitly disables the plane by passing fb=0
+                        * because plane->fb still gets set and pinned.
+                        */
+                       intel_disable_primary_hw_plane(plane, crtc);
+               }
+
+               intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
+
+               mutex_lock(&dev->struct_mutex);
+               intel_update_fbc(dev);
+               mutex_unlock(&dev->struct_mutex);
+       }
+
+       if (old_fb) {
+               if (intel_crtc->active && old_fb != fb)
+                       intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+               if (old_fb != fb) {
+                       mutex_lock(&dev->struct_mutex);
+                       intel_unpin_fb_obj(old_obj);
+                       mutex_unlock(&dev->struct_mutex);
+               }
+       }
+
        return 0;
 }

-- 
1.9.3

Reply via email to