From: Gustavo Padovan <gustavo.pado...@collabora.co.uk>
Factor out a piece of code from intel_pipe_set_base() that updates
the pipe size and adjust fitter.
This will help refactor the update primary plane path.
v2: use struct intel_crtc as argument to intel_update_pipe_size()
v3: use 'crtc' as argument name
Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
---
drivers/gpu/drm/i915/intel_display.c | 70 ++++++++++++++++++++----------------
1 file changed, 40 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 2ccf7c0..b78f00a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2779,6 +2779,45 @@ static bool intel_crtc_has_pending_flip(struct drm_crtc
*crtc)
return pending;
}
+static void intel_update_pipe_size(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ const struct drm_display_mode *adjusted_mode;
+
+ if (!i915.fastboot)
+ return;
+
+ /*
+ * Update pipe size and adjust fitter if needed: the reason for this is
+ * that in compute_mode_changes we check the native mode (not the pfit
+ * mode) to see if we can flip rather than do a full mode set. In the
+ * fastboot case, we'll flip, but if we don't update the pipesrc and
+ * pfit state, we'll end up with a big fb scanned out into the wrong
+ * sized surface.
+ *
+ * To fix this properly, we need to hoist the checks up into
+ * compute_mode_changes (or above), check the actual pfit state and
+ * whether the platform allows pfit disable with pipe active, and only
+ * then update the pipesrc and pfit state, even on the flip path.
+ */
+
+ adjusted_mode = &crtc->config.adjusted_mode;
+
+ I915_WRITE(PIPESRC(crtc->pipe),
+ ((adjusted_mode->crtc_hdisplay - 1) << 16) |
+ (adjusted_mode->crtc_vdisplay - 1));
+ if (!crtc->config.pch_pfit.enabled &&
+ (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))) {
+ I915_WRITE(PF_CTL(crtc->pipe), 0);
+ I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
+ I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
+ }
+ crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
+ crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
+}
+
static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *fb)
@@ -2821,36 +2860,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return ret;
}
- /*
- * Update pipe size and adjust fitter if needed: the reason for this is
- * that in compute_mode_changes we check the native mode (not the pfit
- * mode) to see if we can flip rather than do a full mode set. In the
- * fastboot case, we'll flip, but if we don't update the pipesrc and
- * pfit state, we'll end up with a big fb scanned out into the wrong
- * sized surface.
- *
- * To fix this properly, we need to hoist the checks up into
- * compute_mode_changes (or above), check the actual pfit state and
- * whether the platform allows pfit disable with pipe active, and only
- * then update the pipesrc and pfit state, even on the flip path.
- */
- if (i915.fastboot) {
- const struct drm_display_mode *adjusted_mode =
- &intel_crtc->config.adjusted_mode;
-
- I915_WRITE(PIPESRC(intel_crtc->pipe),
- ((adjusted_mode->crtc_hdisplay - 1) << 16) |
- (adjusted_mode->crtc_vdisplay - 1));
- if (!intel_crtc->config.pch_pfit.enabled &&
- (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
- I915_WRITE(PF_CTL(intel_crtc->pipe), 0);
- I915_WRITE(PF_WIN_POS(intel_crtc->pipe), 0);
- I915_WRITE(PF_WIN_SZ(intel_crtc->pipe), 0);
- }
- intel_crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
- intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
- }
+ intel_update_pipe_size(intel_crtc);
dev_priv->display.update_primary_plane(crtc, fb, x, y);
--
1.9.3
