On Wed, Sep 24, 2014 at 11:04:32PM +0300, Laurent Pinchart wrote:
> Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector
> and configure the DISP pin group that drives the HDMI transmitter DE
> pin.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Acked-by: Simon Horman <horms+renesas at verge.net.au>
Please be careful of any conflicts that may arise if this patch
doesn't go through my renesas tree.
> ---
> arch/arm/boot/dts/r8a7791-koelsch.dts | 50
> ++++++++++++++++++++++++++++++++++-
> 1 file changed, 49 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts
> b/arch/arm/boot/dts/r8a7791-koelsch.dts
> index 9051e01..b7d0c41 100644
> --- a/arch/arm/boot/dts/r8a7791-koelsch.dts
> +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
> @@ -209,6 +209,17 @@
> states = <3300000 1
> 1800000 0>;
> };
> +
> + hdmi-out {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&adv7511_out>;
> + };
> + };
> + };
> };
>
> &du {
> @@ -217,6 +228,11 @@
> status = "okay";
>
> ports {
> + port at 0 {
> + endpoint {
> + remote-endpoint = <&adv7511_in>;
> + };
> + };
> port at 1 {
> lvds_connector: endpoint {
> };
> @@ -235,7 +251,7 @@
> };
>
> du_pins: du {
> - renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
> + renesas,groups = "du_rgb666", "du_sync", "du_disp",
> "du_clk_out_0";
> renesas,function = "du";
> };
>
> @@ -439,6 +455,38 @@
> };
> };
>
> + hdmi at 39 {
> + compatible = "adi,adv7511w";
> + reg = <0x39>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
> +
> + adi,input-depth = <8>;
> + adi,input-colorspace = "rgb";
> + adi,input-clock = "1x";
> + adi,input-style = <1>;
> + adi,input-justification = "evenly";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + adv7511_in: endpoint {
> + remote-endpoint = <&du_out_rgb>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + adv7511_out: endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> + };
> +
> eeprom at 50 {
> compatible = "renesas,24c02";
> reg = <0x50>;
> --
> 1.8.5.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
