Add the new flags argument to calls of (devm_)gpiod_get*() and
remove any direction setting code afterwards.
Currently both forms (with or without the flags argument)
are valid thanks to transitional macros in
<linux/gpio/consumer.h>. These macros will be removed once
all consumers are updated and the flags argument will become
compulsary.
Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
drivers/gpu/drm/panel/panel-simple.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 23de22f8c820..83d93062930d 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -247,21 +247,14 @@ static int panel_simple_probe(struct device *dev, const
struct panel_desc *desc)
if (IS_ERR(panel->supply))
return PTR_ERR(panel->supply);
- panel->enable_gpio = devm_gpiod_get_optional(dev, "enable");
+ panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
+ GPIOD_OUT_LOW);
if (IS_ERR(panel->enable_gpio)) {
err = PTR_ERR(panel->enable_gpio);
dev_err(dev, "failed to request GPIO: %d\n", err);
return err;
}
- if (panel->enable_gpio) {
- err = gpiod_direction_output(panel->enable_gpio, 0);
- if (err < 0) {
- dev_err(dev, "failed to setup GPIO: %d\n", err);
- return err;
- }
- }
-
backlight = of_parse_phandle(dev->of_node, "backlight", 0);
if (backlight) {
panel->backlight = of_find_backlight_by_node(backlight);
--
2.1.2
