The tda998x driver accepts only 3 chips from the TDA998x family.
To avoid confusion with the other TDA998x chips, this patch changes
the driver compatible string to "nxp,tda9989".
As the previous compatible string is not actually used in any DT,
no compatibility is offered.
Signed-off-by: Jean-Francois Moine <moinejf at free.fr>
---
v3:
- fix the I2C ID (the OF compatible is not used for such drivers)
- define only one compatible (Sebastian Hesselbarth)
- change the subject (Sebastian Hesselbarth)
v2:
- change the subject to drm/i2c
This patch applies after
drm/i2c: tda998x: Fix lack of required reg in DT documentation
---
Documentation/devicetree/bindings/drm/i2c/tda998x.txt | 4 ++--
drivers/gpu/drm/i2c/tda998x_drv.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
index e9e4bce..9b41c7e 100644
--- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
+++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
@@ -1,7 +1,7 @@
Device-Tree bindings for the NXP TDA998x HDMI transmitter
Required properties;
- - compatible: must be "nxp,tda998x"
+ - compatible: must be "nxp,tda9989"
- reg: I2C address
@@ -20,7 +20,7 @@ Optional properties:
Example:
tda998x: hdmi-encoder {
- compatible = "nxp,tda998x";
+ compatible = "nxp,tda9989";
reg = <0x70>;
interrupt-parent = <&gpio0>;
interrupts = <27 2>; /* falling edge */
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c
b/drivers/gpu/drm/i2c/tda998x_drv.c
index 48af5ca..249ef84 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -1367,14 +1367,14 @@ fail:
#ifdef CONFIG_OF
static const struct of_device_id tda998x_dt_ids[] = {
- { .compatible = "nxp,tda998x", },
+ { .compatible = "nxp,tda9989", },
{ }
};
MODULE_DEVICE_TABLE(of, tda998x_dt_ids);
#endif
static struct i2c_device_id tda998x_ids[] = {
- { "tda998x", 0 },
+ { "tda9989", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tda998x_ids);
--
1.9.1
